Type that blocks the scroll movement in one or more direction.

Since (EFL) :

1.8

Enumerator:

ELM_SCROLLER_MOVEMENT_NO_BLOCK	Do not block movements
ELM_SCROLLER_MOVEMENT_BLOCK_VERTICAL	Block vertical movements
ELM_SCROLLER_MOVEMENT_BLOCK_HORIZONTAL	Block horizontal movements

Type that controls when scrollbars should appear.

See also Elm::Interface_Scrollable::policy::set.

Enumerator:

ELM_SCROLLER_POLICY_AUTO	Show scrollbars as needed
ELM_SCROLLER_POLICY_ON	Always show scrollbars
ELM_SCROLLER_POLICY_OFF	Never show scrollbars
ELM_SCROLLER_POLICY_LAST	Sentinel value to indicate last enum field during iteration

Type that controls how the content is scrolled.

See also Elm::Interface_Scrollable::single_direction::set.

Enumerator:

ELM_SCROLLER_SINGLE_DIRECTION_NONE	Scroll every direction
ELM_SCROLLER_SINGLE_DIRECTION_SOFT	Scroll single direction if the direction is certain
ELM_SCROLLER_SINGLE_DIRECTION_HARD	Scroll only single direction
ELM_SCROLLER_SINGLE_DIRECTION_LAST	Sentinel value to indicate last enum field during iteration

Add a new scroller to the parent.

Parameters:

parent

The parent object

Returns:

The new object or NULL if it cannot be created

Since :

2.3

Examples:

scroller_example_01.c.

Get the bounce behaviour.

Parameters:

obj	The Scroller object
h_bounce	Will the scroller bounce horizontally or not
v_bounce	Will the scroller bounce vertically or not

See also:

elm_scroller_bounce_set()

Since :

2.3

Examples:

gengrid_example.c, and genlist_example_02.c.

Set bouncing behavior.

Parameters:

obj	The scroller object
h_bounce	Allow bounce horizontally
v_bounce	Allow bounce vertically

When scrolling, the scroller may "bounce" when reaching an edge of the content object. This is a visual way to indicate the end has been reached. This is enabled by default for both axis. This API will set if it is enabled for the given axis with the boolean parameters for each axis.

Since :

2.3

Examples:

diskselector_example_01.c, gengrid_example.c, genlist_example_02.c, list_example_02.c, photocam_example_01.c, and scroller_example_01.c.

Get the size of the content object.

Parameters:

obj	The scroller object
w	Width of the content object.
h	Height of the content object.

This gets the size of the content object of the scroller.

Since :

2.3

Make the scroller minimum size limited to the minimum size of the content.

Parameters:

obj	The scroller object
w	Enable limiting minimum size horizontally
h	Enable limiting minimum size vertically

By default the scroller will be as small as its design allows, irrespective of its content. This will make the scroller minimum size the right size horizontally and/or vertically to perfectly fit its content in that direction.

Since :

2.3

Get scroll current page number.

Parameters:

obj	The scroller object
h_pagenumber	The horizontal page number
v_pagenumber	The vertical page number

The page number starts from 0. 0 is the first page. Current page means the page which meets the top-left of the viewport. If there are two or more pages in the viewport, it returns the number of the page which meets the top-left of the viewport.

See also:

elm_scroller_last_page_get()

elm_scroller_page_show()

elm_scroller_page_bring_in()

Since :

2.3

Examples:

gengrid_example.c.

Set custom theme elements for the scroller.

Parameters:

obj	The scroller object
widget	The widget name to use (default is "scroller")
base	The base name to use (default is "base")

Deprecated:

Use elm_layout_theme_set() instead.

Parameters:

[in]	obj	The object.
[in]	klass	Klass name
[in]	group	Group name

Get scrolling gravity values for a scroller.

Parameters:

obj	The scroller object
x	The scrolling horizontal gravity
y	The scrolling vertical gravity

This gets gravity values for a scroller.

See also:

elm_scroller_gravity_set()

Since :

2.3

Set scrolling gravity on a scroller.

Parameters:

obj	The scroller object
x	The scrolling horizontal gravity
y	The scrolling vertical gravity

The gravity, defines how the scroller will adjust its view when the size of the scroller contents increase.

The scroller will adjust the view to glue itself as follows.

x=0.0, for staying where it is relative to the left edge of the content x=1.0, for staying where it is relative to the rigth edge of the content y=0.0, for staying where it is relative to the top edge of the content y=1.0, for staying where it is relative to the bottom edge of the content

Default values for x and y are 0.0

Since :

2.3

Get scroll last page number.

Parameters:

obj	The scroller object
h_pagenumber	The horizontal page number
v_pagenumber	The vertical page number

The page number starts from 0. 0 is the first page. This returns the last page number among the pages.

See also:

elm_scroller_current_page_get()

elm_scroller_page_show()

elm_scroller_page_bring_in()

Since :

2.3

Get an infinite loop_ for a scroller.

Parameters:

obj	The scroller object
loop_h	The scrolling horizontal loop
loop_v	The scrolling vertical loop

Since (EFL) :

1.14

See also:

elm_scroller_loop_set() for more details

Since :

3.0

Set an infinite loop_ for a scroller.

Parameters:

obj	The scroller object
loop_h	The scrolling horizontal loop
loop_v	The scrolling vertical loop

This function sets the infinite loop horizontally or vertically. If the content is set, it will be shown repeatedly.

Since (EFL) :

1.14

Since :

2.3

Get a scroller's scroll blocking state.

Parameters:

parent

The scroller object

Returns:

The blocking state

Since (EFL) :

1.8

See also:

elm_scroller_movement_block_set() for more details

Since :

2.3

Set blocking of scrolling (per axis) on a given scroller.

Parameters:

obj	The scroller object
block	The axis to block

This function will block scrolling movement (by input of a user) in a given direction. One can disable movements in the X axis, the Y axis or both. The default value is ELM_SCROLLER_MOVEMENT_NO_BLOCK, where movements are allowed in both directions.

What makes this function different from elm_object_scroll_freeze_push(), elm_object_scroll_hold_push() and elm_object_scroll_lock_x_set() (or elm_object_scroll_lock_y_set()) is that it doesn't propagate its effects to any parent or child widget of obj. Only the target scrollable widget will be locked with regard to scrolling.

Since (EFL) :

1.8

Since :

2.3

Show a specific virtual region within the scroller content object by page number.

Parameters:

obj	The scroller object
h_pagenumber	The horizontal page number
v_pagenumber	The vertical page number

0, 0 of the indicated page is located at the top-left of the viewport. This will slide to the page with animation.

Example of usage:

 sc = elm_scroller_add(win);
 elm_object_content_set(sc, content);
 elm_scroller_page_relative_set(sc, 1, 0);
 elm_scroller_last_page_get(sc, &h_page, &v_page);
 elm_scroller_page_bring_in(sc, h_page, v_page);

See also:

elm_scroller_page_show()

Since :

2.3

Get a given scroller widget's scrolling page size, relative to its viewport size.

Parameters:

obj	The scroller object
h_pagerel	Pointer to a variable where to store the horizontal page (relative) size
v_pagerel	Pointer to a variable where to store the vertical page (relative) size

See also:

elm_scroller_page_relative_set() for more details

Since (EFL) :

1.7

Since :

2.3

Set scroll page size relative to viewport size.

Parameters:

obj	The scroller object
h_pagerel	The horizontal page relative size
v_pagerel	The vertical page relative size

The scroller is capable of limiting scrolling by the user to "pages". That is to jump by and only show a "whole page" at a time as if the continuous area of the scroller content is split into page sized pieces. This sets the size of a page relative to the viewport of the scroller. 1.0 is "1 viewport" is size (horizontally or vertically). 0.0 turns it off in that axis. This is mutually exclusive with page size (see elm_scroller_page_size_set() for more information). Likewise 0.5 is "half a viewport". Sane usable values are normally between 0.0 and 1.0 including 1.0. If you only want 1 axis to be page "limited", use 0.0 for the other axis.

Since :

2.3

Examples:

gengrid_example.c, and scroller_example_01.c.

Get the maximum of the movable page at a flicking.

Parameters:

[in]	obj	The object.
[in]	page_limit_h	The maximum of the movable horizontal page
[in]	page_limit_v	The maximum of the movable vertical page

Since (EFL) :

1.8

Since :

2.3

Set the maximum of the movable page at a flicking.

The value of maximum movable page should be more than 1.

Parameters:

[in]	obj	The object.
[in]	page_limit_h	The maximum of the movable horizontal page
[in]	page_limit_v	The maximum of the movable vertical page

Since (EFL) :

1.8

Since :

2.3

Show a specific virtual region within the scroller content object by page number.

Parameters:

obj	The scroller object
h_pagenumber	The horizontal page number
v_pagenumber	The vertical page number

0, 0 of the indicated page is located at the top-left of the viewport. This will jump to the page directly without animation.

Example of usage:

 sc = elm_scroller_add(win);
 elm_object_content_set(sc, content);
 elm_scroller_page_relative_set(sc, 1, 0);
 elm_scroller_current_page_get(sc, &h_page, &v_page);
 elm_scroller_page_show(sc, h_page + 1, v_page);

See also:

elm_scroller_page_bring_in()

Since :

2.3

Get a scroller widget's current page size.

Parameters:

obj	The scroller object
h_pagesize	Where to store its horizontal page size
v_pagesize	Where to store its vertical page size

See also:

elm_scroller_page_size_set() for more details

elm_scroller_page_relative_set()

Since (EFL) :

1.7

Since :

2.3

Set scroll page size.

Parameters:

obj	The scroller object
h_pagesize	The horizontal page size
v_pagesize	The vertical page size

This sets the page size to an absolute fixed value, with 0 turning it off for that axis.

See also:

elm_scroller_page_relative_set()

elm_scroller_page_size_get()

Since :

2.3

Get the page snap behaviour of a scroller.

Parameters:

obj	The Scroller object
page_h_snap	Will the scroller snap horizontally or not
page_v_snap	Will the scroller snap vertically or not

See also:

elm_scroller_page_snap_set() for more details

Since (EFL) :

1.8

Since :

3.0

Set page snapping behavior of a scroller.

Parameters:

obj	The scroller object
page_h_snap	Allow snap horizontally
page_v_snap	Allow snap vertically

When scrolling, if a scroller is paged (see elm_scroller_page_size_set() and elm_scroller_page_relative_set()), the scroller may snap to pages when being scrolled, i.e., even if it had momentum to scroll further, it will stop at the next page boundaries. This is disabled, by default, for both axis. This function will set if it that is enabled or not, for each axis.

Note:

If obj is not set to have pages, nothing will happen after this call.

Since (EFL) :

1.8

Since :

3.0

Get scrollbar visibility policy.

Parameters:

obj	The scroller object
policy_h	Horizontal scrollbar policy
policy_v	Vertical scrollbar policy

See also:

elm_scroller_policy_set()

Since :

2.3

Examples:

genlist_example_02.c.

Set the scrollbar visibility policy.

Parameters:

obj	The scroller object
policy_h	Horizontal scrollbar policy
policy_v	Vertical scrollbar policy

This sets the scrollbar visibility policy for the given scroller. ELM_SCROLLER_POLICY_AUTO means the scrollbar is made visible if it is needed, and otherwise kept hidden. ELM_SCROLLER_POLICY_ON turns it on all the time, and ELM_SCROLLER_POLICY_OFF always keeps it off. This applies respectively for the horizontal and vertical scrollbars.

Since :

2.3

Examples:

diskselector_example_01.c, genlist_example_02.c, list_example_02.c, and scroller_example_01.c.

Get event propagation for a scroller.

This gets the event propagation for a scroller.

Parameters:

[in]

obj

The scroller object

Returns:

The propagation state

Since :

2.3

Set event propagation on a scroller.

This enables or disables event propagation from the scroller content to the scroller and its parent. By default event propagation is enabled.

Parameters:

[in]	obj	The scroller object
[in]	propagation	The propagation state

Since :

2.3

Examples:

scroller_example_01.c.

Show a specific virtual region within the scroller content object.

Parameters:

obj	The scroller object
x	X coordinate of the region
y	Y coordinate of the region
w	Width of the region
h	Height of the region

This will ensure all (or part if it does not fit) of the designated region in the virtual content object (0, 0 starting at the top-left of the virtual content object) is shown within the scroller. Unlike elm_scroller_region_show(), this allow the scroller to "smoothly slide" to this location (if configuration in general calls for transitions). It may not jump immediately to the new location and make take a while and show other content along the way.

See also:

elm_scroller_region_show()

Since :

2.3

Get the currently visible content region.

Parameters:

obj	The scroller object
x	X coordinate of the region
y	Y coordinate of the region
w	Width of the region
h	Height of the region

This gets the current region in the content object that is visible through the scroller. The region co-ordinates are returned in the x, y, w, h values pointed to.

Note:

All coordinates are relative to the content.

See also:

elm_scroller_region_show()

Since :

2.3

Show a specific virtual region within the scroller content object.

Parameters:

obj	The scroller object
x	X coordinate of the region
y	Y coordinate of the region
w	Width of the region
h	Height of the region

This will ensure all (or part if it does not fit) of the designated region in the virtual content object (0, 0 starting at the top-left of the virtual content object) is shown within the scroller.

Since :

2.3

Examples:

scroller_example_01.c.

Get the type of single direction scroll.

Parameters:

obj	The scroller object

Returns:

the type of single direction

See also:

elm_scroller_single_direction_get()

Since (EFL) :

1.8

Since :

2.3

Set the type of single direction scroll.

Parameters:

obj	The scroller object
single_dir	The type of single direction

See also:

elm_scroller_single_direction_get()

Since (EFL) :

1.8

Since :

2.3

Get the current step size of the scroller object.

Parameters:

obj	The scroller object
x	Where to store its x axis step size
y	Where to store its y axis step size

See also:

elm_scroller_step_size_set() for more details

Since (EFL) :

1.13

Since :

3.0

Set scroll step size.

Parameters:

obj	The scroller object
x	The horizontal step size
y	The vertical step size

This sets the step size to move scroller by key event.

See also:

elm_scroller_step_size_get() for more details

Since (EFL) :

1.13

Since :

3.0

Get a value whether mouse wheel is enabled or not over the scroller.

Parameters:

obj	The scroller object

Returns:

EINA_TRUE means scroller wheel is disabled. EINA_FALSE indicates it is enabled.

Mouse wheel can be used to scroll up and down the scroller.

Since (EFL) :

1.15

See also:

elm_scroller_wheel_disabled_set()

Since :

3.0

Enable or disable mouse wheel to be used to scroll the scroller.

Parameters:

obj	The scroller object
disabled	The mouse wheel disabled over the scroller.

Mouse wheel can be used to scroll up and down the scroller. Wheel is enabled by default.

Since (EFL) :

1.15

See also:

elm_scroller_wheel_disabled_get()

Since :

3.0