An i18n_ucnv_h handle.

Since :

6.0

Enum for specifying which platform a converter ID refers to.

Since :

6.0

Enumerator:

I18N_UCNV_UNKNOWN	unknown
I18N_UCNV_IBM	IBM

Enum for specifying basic types of converters.

Since :

6.0

Enumerator:

I18N_UCNV_UNSUPPORTED_CONVERTER	unsupported
I18N_UCNV_SBCS	SBCS
I18N_UCNV_DBCS	DBCS
I18N_UCNV_MBCS	MBCS
I18N_UCNV_LATIN_1	latin
I18N_UCNV_UTF8	UTF8
I18N_UCNV_UTF16_BIG_ENDIAN	UTF16 big endian
I18N_UCNV_UTF16_LITTLE_ENDIAN	UTF16 little endian
I18N_UCNV_UTF32_BIG_ENDIAN	UTF32 big endian
I18N_UCNV_UTF32_LITTLE_ENDIAN	UTF32 little endian
I18N_UCNV_EBCDIC_STATEFUL	EBCDIC_STATEFUL
I18N_UCNV_ISO_2022	ISO_2022
I18N_UCNV_LMBCS_1	LMBCS_1
I18N_UCNV_LMBCS_2	LMBCS_2
I18N_UCNV_LMBCS_3	LMBCS_3
I18N_UCNV_LMBCS_4	LMBCS_4
I18N_UCNV_LMBCS_5	LMBCS_5
I18N_UCNV_LMBCS_6	LMBCS_6
I18N_UCNV_LMBCS_8	LMBCS_8
I18N_UCNV_LMBCS_11	LMBCS_11
I18N_UCNV_LMBCS_16	LMBCS_16
I18N_UCNV_LMBCS_17	LMBCS_17
I18N_UCNV_LMBCS_18	LMBCS_18
I18N_UCNV_LMBCS_19	LMBCS_19
I18N_UCNV_LMBCS_LAST	LMBCS_LAST
I18N_UCNV_HZ	HZ
I18N_UCNV_SCSU	SCSU
I18N_UCNV_ISCII	ISCII
I18N_UCNV_US_ASCII	US_ASCII
I18N_UCNV_UTF7	UTF7
I18N_UCNV_BOCU1	BOCU1
I18N_UCNV_UTF16	UTF16
I18N_UCNV_UTF32	UTF32
I18N_UCNV_CESU8	CESU8
I18N_UCNV_IMAP_MAILBOX	IMAP
I18N_UCNV_COMPOUND_TEXT	COMPOUND_TEXT

Selectors for Unicode sets that can be returned by i18n_ucnv_get_unicode_set().

Since :

6.0

Enumerator:

I18N_UCNV_ROUNDTRIP_SET	Select the set of roundtrippable Unicode code points.
I18N_UCNV_ROUNDTRIP_AND_FALLBACK_SET	Select the set of Unicode code points with roundtrip or fallback mappings.

Does a fuzzy compare of two converter/alias names.

The comparison is case-insensitive, ignores leading zeroes if they are not followed by further digits, and ignores all but letters and digits. Thus the strings "UTF-8", "utf_8", "u*T@f08" and "Utf 8" are exactly equivalent. See section 1.4, Charset Alias Matching in Unicode Technical Standard #22 at http://www.unicode.org/reports/tr22/.

Since :

6.0

Parameters:

[in]	name1	A converter name or alias, zero-terminated.
[in]	name2	A converter name or alias, zero-terminated.

Returns:

0 if the names match, or a negative value if the name1 lexically precedes name2, or a positive value if the name1 lexically follows name2.

Exceptions:

I18N_ERROR_NONE	Successful
I18N_ERROR_INVALID_PARAMETER	Invalid function parameter

Converts from one external charset to another.

Internally, two converters are created according to the name arguments, then the text is converted to and from the 16-bit Unicode "pivot" using i18n_ucnv_convert_ex(), then the converters are destroyed again.

This is a convenience function, not an efficient way to convert a lot of text: i18n_ucnv_convert()

• takes charset names, not converter objects, so that
  • two converters are created for each call
  • only single-string conversion is possible, not streaming operation
• does not provide enough information to find out, in case of failure, whether the toUnicode or the fromUnicode conversion failed
• allows NUL-terminated input (only a single NUL byte, will not work for charsets with multi-byte NULs) (if source_length ==-1, see parameters) terminate with a NUL on output (only a single NUL byte, not useful for charsets with multi-byte NULs), or set I18N_WARNING_STRING_NOT_TERMINATED if the output exactly fills the target buffer
  
• a pivot buffer is provided internally

The function returns when one of the following is true:

• the entire source text has been converted successfully to the target buffer and either the target buffer is terminated with a single NUL byte or the error code is set to I18N_WARNING_STRING_NOT_TERMINATED
  
• a target buffer overflow occurred (I18N_ERROR_BUFFER_OVERFLOW) and the full output string length is returned ("preflighting")
• a conversion error occurred

  Since :

  6.0

  Parameters:

  [in]	to_converter_name	The name of the converter that is used to convert from the UTF-16 pivot buffer to the target.
  [in]	from_converter_name	The name of the converter that is used to convert from the source to the UTF-16 pivot buffer.
  [in]	target	Pointer to the output buffer.
  [in]	target_capacity	Capacity of the target, in bytes.
  [in]	source	Pointer to the input buffer.
  [in]	source_length	Length of the input text (the number of i18n_uchar characters) or -1 if NUL-terminated
  [out]	output_length	Length of the complete output text in bytes, even if it exceeds the target_capacity and a I18N_ERROR_BUFFER_OVERFLOW is set.

  Returns:

  0 on success, otherwise a negative error value.

  Return values:

  I18N_ERROR_NONE	Successful
  I18N_ERROR_INVALID_PARAMETER	Invalid function parameter
  I18N_ERROR_BUFFER_OVERFLOW	A result would not fit in the supplied buffer

  See also:

  i18n_ucnv_convert_ex()

  i18n_ucnv_from_algorithmic()

  i18n_ucnv_to_algorithmic()

  i18n_ucnv_from_unicode()

  i18n_ucnv_to_unicode()

  i18n_ucnv_from_uchars()

  i18n_ucnv_to_uchars()

  i18n_ucnv_get_next_uchar()

Converts from one external charset to another using two existing i18n_ucnv_h.

Internally, two conversions - i18n_ucnv_to_unicode() and i18n_ucnv_from_unicode() - are used, "pivoting" through 16-bit Unicode.

Important: For streaming conversion (multiple function calls for successive parts of a text stream), the caller must provide a pivot buffer explicitly, and must preserve the pivot buffer and associated pointers from one call to another. (The buffer may be moved if its contents and the relative pointer positions are preserved.)

There is a similar function, i18n_ucnv_convert(), which has the following limitations:

• it takes charset names, not converter objects, so that
  • two converters are created for each call
  • only single-string conversion is possible, not streaming operation
• it does not provide enough information to find out, in case of failure, whether the toUnicode or the fromUnicode conversion failed

By contrast, i18n_ucnv_convert_ex()

• takes i18n_ucnv_h parameters instead of charset names
• fully exposes the pivot buffer for streaming conversion and complete error handling

i18n_ucnv_convert_ex() also provides further convenience:

• an option to reset the converters at the beginning (if reset==TRUE, see parameters; also sets *pivot_target=*pivot_source=pivot_start) allow NUL-terminated input (only a single NUL byte, will not work for charsets with multi-byte NULs) (if source_limit ==NULL, see parameters)
• terminate with a NUL on output (only a single NUL byte, not useful for charsets with multi-byte NULs), or set I18N_WARNING_STRING_NOT_TERMINATED if the output exactly fills the target buffer
  
• the pivot buffer can be provided internally; possible only for whole-string conversion, not streaming conversion; in this case, the caller will not be able to get details about where an error occurred (if pivot_start ==NULL, see below)
  

The function returns when one of the following is true:

• the entire source text has been converted successfully to the target buffer
• a target buffer overflow occurred (I18N_ERROR_BUFFER_OVERFLOW)
• a conversion error occurred

Limitation compared to the direct use of i18n_ucnv_from_unicode() and i18n_ucnv_to_unicode(): i18n_ucnv_convert_ex() does not provide offset information.

Limitation compared to i18n_ucnv_from_uchars() and i18n_ucnv_to_uchars(): i18n_ucnv_convert_ex() does not support preflighting directly.

Since :

6.0

Parameters:

[in]	target_cnv	Output converter, used to convert from the UTF-16 pivot to the target using i18n_ucnv_from_unicode().
[in]	source_cnv	Input converter, used to convert from the source to the UTF-16 pivot using i18n_ucnv_to_unicode().
[in,out]	target	Input: *target points to the beginning of the target buffer. Output: *target points to the first unit after the last char written.
[in]	target_limit	Pointer to the first unit after the target buffer.
[in,out]	source	Input: *source points to the beginning of the source buffer. Output: *source points to the first unit after the last char read.
[in]	source_limit	Pointer to the first unit after the source buffer.
[in]	pivot_start	Pointer to the UTF-16 pivot buffer. If pivot_start ==NULL, then an internal buffer is used and the other pivot arguments are ignored and can be NULL as well.
[in,out]	pivot_source	Conversion from the pivot buffer to the target buffer.
[in,out]	pivot_target	Conversion from the source buffer to the pivot buffer. It must be pivot_start<=*pivot_source<=*pivot_target<=pivotLimit and pivot_start<pivotLimit (unless pivot_start ==NULL).
[in]	pivot_limit	Pointer to the first unit after the pivot buffer.
[in]	reset	If TRUE, then i18n_ucnv_reset_to_unicode(source_cnv) and i18n_ucnv_reset_from_unicode(target_cnv) are called, and the pivot pointers are reset (*pivot_target=*pivot_source=pivot_start).
[in]	flush	If TRUE, indicates the end of the input. Passed directly to i18n_ucnv_to_unicode(), and carried over to i18n_ucnv_from_unicode() when the source is empty as well.

Returns:

0 on success, otherwise a negative error value.

Return values:

I18N_ERROR_NONE	Successful
I18N_ERROR_INVALID_PARAMETER	Invalid function parameter
I18N_ERROR_BUFFER_OVERFLOW	A result would not fit in the supplied buffer

See also:

i18n_ucnv_convert()

i18n_ucnv_from_algorithmic()

i18n_ucnv_to_algorithmic()

i18n_ucnv_from_unicode()

i18n_ucnv_to_unicode()

i18n_ucnv_from_uchars()

i18n_ucnv_to_uchars()

Gets the number of aliases for a given converter or alias name.

This method only enumerates the listed entries in the alias file.

Since :

6.0

Parameters:

[in]	alias	Alias name
[out]	number	The number of names on alias list for given alias

Returns:

0 on success, otherwise a negative error value.

Return values:

I18N_ERROR_NONE	Successful
I18N_ERROR_INVALID_PARAMETER	Invalid function parameter

Returns the number of available converters, as per the alias file.

Since :

6.0

Returns:

The number of available converters.

See also:

i18n_ucnv_get_available_name()

Returns the number of standards associated to converter names.

Since :

6.0

Returns:

The number of standards.

Creates an i18n_ucnv_h with the name of a coded character set specified as a C string.

The actual name will be resolved with the alias file using a case-insensitive string comparison that ignores leading zeroes and all non-alphanumeric characters. E.g., the names "UTF8", "utf-8", "u*T@f08" and "Utf 8" are all equivalent. (See also i18n_ucnv_compare_names().) If NULL is passed for the converter name, it will create one with the i18n_ucnv_get_default_name() return value.

A converter name for ICU 1.5 and above may contain options like a locale specification to control the specific behavior of the newly instantiated converter. The meaning of the options depends on the particular converter. If an option is not defined for or recognized by a given converter, then it is ignored.

Options are appended to the converter name string, with a "," between the name and the first option and also between adjacent options.

The conversion behavior and names can vary between platforms. ICU may convert some characters differently from other platforms.

Since :

6.0

Remarks:

The converter should be released using i18n_ucnv_destroy().

Parameters:

[in]	converter_name	Name of the coded character set table. This may have options appended to the string. IANA alias character set names, IBM CCSIDs starting with "ibm-", Windows codepage numbers starting with "windows-" are frequently used for this parameter. See i18n_ucnv_get_available_name() and i18n_ucnv_get_alias() for a complete list that is available. If this parameter is NULL, the default converter will be used.
[out]	converter	The created i18n_ucnv_h, or NULL if an error occurred.

Returns:

0 on success, otherwise a negative error value.

Return values:

I18N_ERROR_NONE	Successful
I18N_ERROR_INVALID_PARAMETER	Invalid function parameter
I18N_ERROR_FILE_ACCESS	The requested file cannot be found
I18N_ERROR_OUT_OF_MEMORY	Out of memory

See also:

i18n_ucnv_create_unicode()

i18n_ucnv_create_ccsid()

i18n_ucnv_get_available_name()

i18n_ucnv_get_alias()

i18n_ucnv_get_default_name()

i18n_ucnv_destroy()

i18n_ucnv_compare_names()

Gets an i18n_uenumeration_h to enumerate all of the canonical converter names, as per the alias file, regardless of the ability to create each converter.

Since :

6.0

Remarks:

The enumeration should be released using i18n_uenumeration_destroy().

Parameters:

[out]

enumeration

An i18n_uenumeration_h for getting all the recognized canonical converter names.

Returns:

0 on success, otherwise a negative error value.

Return values:

I18N_ERROR_NONE	Successful
I18N_ERROR_INVALID_PARAMETER	Invalid function parameter

See also:

i18n_ucnv_get_available_name()

i18n_uenumeration_destroy()

i18n_uenumeration_next()

Creates an i18n_ucnv_h from a CCSID number and platform pair.

Note that the usefulness of this function is limited to platforms with numeric encoding IDs. Only IBM and Microsoft platforms use numeric (16-bit) identifiers for encodings.

In addition, IBM CCSIDs and Unicode conversion tables are not 1:1 related. For many IBM CCSIDs there are multiple (up to six) Unicode conversion tables, and for some Unicode conversion tables there are multiple CCSIDs. Some "alternate" Unicode conversion tables are provided by the IBM CDRA conversion table registry. The most prominent example of a systematic modification of conversion tables that is not provided in the form of conversion table files in the repository is that S/390 Unix System Services swaps the codes for Line Feed and New Line in all EBCDIC codepages, which requires such a swap in the Unicode conversion tables as well.

Only IBM default conversion tables are accessible with i18n_ucnv_create_ccsid(). i18n_ucnv_get_ccsid() will return the same CCSID for all conversion tables that are associated with that CCSID.

In summary, the use of CCSIDs and the associated function functions is not recommended.

In order to create a converter with the default IBM CDRA Unicode conversion table, you can use this function or use the prefix "ibm-":

Since :

6.0

Remarks:

The converter should be released using i18n_ucnv_destroy().

Parameters:

[in]	codepage	Codepage number to create
[in]	platform	The platform in which the codepage number exists
[out]	converter	The created i18n_ucnv_h, or NULL if an error occurred.

Returns:

0 on success, otherwise a negative error value.

Return values:

I18N_ERROR_NONE	Successful
I18N_ERROR_INVALID_PARAMETER	Invalid function parameter
I18N_ERROR_OUT_OF_MEMORY	Out of memory
I18N_ERROR_FILE_ACCESS	Requested file cannot be found

See also:

i18n_ucnv_create()

i18n_ucnv_create_unicode()

i18n_ucnv_get_ccsid()

i18n_ucnv_get_platform()

Creates an i18n_ucnv_h specified from a package_name and a converter_name.

The package_name and converter_name must point to an ICU udata object. Typically, package_name will refer to a (.dat) file. Using a full file or directory pathname for package_name is deprecated.

The name will NOT be looked up in the alias mechanism, nor will the converter be stored in the converter cache or the alias table. The only way to create further converters is call this function multiple times, or use the i18n_ucnv_safe_clone() function to clone a 'master' converter.

A future version may add alias table lookups and/or caching to this function.

Since :

6.0

Remarks:

The converter should be released using i18n_ucnv_destroy().

Parameters:

[in]	package_name	Name of the package.
[in]	converter_name	Name of the data item to be used, without suffix.
[out]	converter	The created i18n_ucnv_h, or NULL if an error occurred.

Returns:

0 on success, otherwise a negative error value.

Return values:

I18N_ERROR_NONE	Successful
I18N_ERROR_INVALID_PARAMETER	Invalid function parameter
I18N_ERROR_OUT_OF_MEMORY	Out of memory
I18N_ERROR_FILE_ACCESS	Requested file cannot be found

See also:

i18n_ucnv_create()

i18n_ucnv_safe_clone()

Gets an i18n_uenumeration_h for enumerating all the alias names for a given converter that are recognized by a standard.

This method only enumerates the listed entries in the alias file. The first result in this list is the same result given by i18n_ucnv_get_standard_name(), which is the default alias for the specified standard name. The returned object must be destroyed with i18n_uenumeration_destroy() when you are done with the object.

Since :

6.0

Parameters:

[in]	conv_name	The original converter name
[in]	standard	The name of the standard governing the names; MIME and IANA are such standards
[out]	enumeration	An i18n_uenumeration_h for getting all aliases that are recognized by a standard. If any of the parameters are invalid, NULL is returned.

Returns:

0 on success, otherwise a negative error value.

Return values:

I18N_ERROR_NONE	Successful
I18N_ERROR_INVALID_PARAMETER	Invalid function parameter

See also:

i18n_ucnv_get_standard_name()

i18n_uenumeration_destroy()

i18n_uenumeration_next()

Creates a Unicode converter with the names specified as unicode string.

The name should be limited to the ASCII-7 alphanumerics range. The actual name will be resolved with the alias file using a case-insensitive string comparison that ignores leading zeroes and all non-alphanumeric characters. E.g., the names "UTF8", "utf-8", "u*T@f08" and "Utf 8" are all equivalent. (See also i18n_ucnv_compare_names().) If NULL is passed for the converter name, it will create one with the i18n_ucnv_get_default_name() return value.

See i18n_ucnv_create() for the complete details.

Since :

6.0

Remarks:

The converter should be released using i18n_ucnv_destroy().

Parameters:

[in]	name	Name of the i18n_ucnv_h table in a zero terminated Unicode string.
[out]	converter	The created i18n_ucnv_h, or NULL if an error occurred.

Returns:

0 on success, otherwise a negative error value.

Return values:

I18N_ERROR_NONE	Successful
I18N_ERROR_INVALID_PARAMETER	Invalid function parameter
I18N_ERROR_OUT_OF_MEMORY	Out of memory
I18N_ERROR_FILE_ACCESS	Requested file cannot be found

See also:

i18n_ucnv_create()

i18n_ucnv_create_ccsid()

i18n_ucnv_get_available_name()

i18n_ucnv_destroy()

i18n_ucnv_compare_names()

Deletes the unicode converter and releases resources associated with just this instance.

Does not free up shared converter tables.

Since :

6.0

Parameters:

[in]

converter

The converter object to be deleted.

Returns:

0 on success, otherwise a negative error value.

Return values:

I18N_ERROR_NONE	Successful
I18N_ERROR_INVALID_PARAMETER	Invalid function parameter

Detects Unicode signature byte sequences at the start of the byte stream and returns the charset name of the indicated Unicode charset.

The caller can i18n_ucnv_create() a converter using the charset name. The first code unit (i18n_uchar) from the start of the stream will be U+FEFF (the Unicode BOM/signature character) and can usually be ignored.

For most Unicode charsets it is also possible to ignore the indicated number of initial stream bytes and start converting after them. However, there are stateful Unicode charsets (UTF-7 and BOCU-1) for which this will not work. Therefore, it is best to ignore the first output i18n_uchar instead of the input signature bytes.

Since :

6.0

Remarks:

The returned name should be freed by the caller with free() function.

Parameters:

[in]	source	The source string in which the signature should be detected.
[in]	source_length	Length of the input string, or -1 if terminated with a NUL byte.
[out]	signature_length	A pointer to int32_t to receive the number of bytes that make up the signature of the detected UTF. 0 if not detected. Can be a NULL pointer.
[out]	name	The name of the encoding detected. NULL if encoding is not detected.

Returns:

0 on success, otherwise a negative error value.

Return values:

I18N_ERROR_NONE	Successful
I18N_ERROR_INVALID_PARAMETER	Invalid function parameter

Fixes the backslash character mismapping.

For example, in SJIS, the backslash character in the ASCII portion is also used to represent the yen currency sign. When mapping from Unicode character 0x005C, it's unclear whether to map the character back to yen or backslash in SJIS. This function will take the input buffer and replace all the yen sign characters with backslash. This is necessary when the user tries to create a file with the input buffer on Windows. This function will test the converter to see whether such mapping is required. You can sometimes avoid using this function by using the correct version of Shift-JIS.

Since :

6.0

Parameters:

[in]	converter	The converter representing the target codepage.
[in]	source	The input buffer to be fixed
[in]	source_len	The length (the number of i18n_uchar characters) of the input buffer

Returns:

0 on success, otherwise a negative error value.

Return values:

I18N_ERROR_NONE	Successful
I18N_ERROR_INVALID_PARAMETER	Invalid function parameter

See also:

i18n_ucnv_is_ambiguous()

Frees up memory occupied by unused, cached converter shared data.

Since :

6.0

Returns:

The number of cached converters successfully deleted

See also:

i18n_ucnv_destroy()

Converts from one external charset to another.

Internally, the text is converted to and from the 16-bit Unicode "pivot" using i18n_ucnv_convert_ex(). i18n_ucnv_from_algorithmic() works exactly like i18n_ucnv_convert() except that the two converters need not be looked up and created completely.

The source-to-pivot conversion uses a purely algorithmic converter according to the specified type, e.g., I18N_UCNV_UTF8 for a UTF-8 converter. The pivot-to-target conversion uses the converter i18n_ucnv_h.

Internally, the algorithmic converter is created and destroyed for each function call, which is more efficient than using the public i18n_ucnv_create() but somewhat less efficient than only resetting an existing converter and using i18n_ucnv_convert_ex().

This function is more convenient than i18n_ucnv_convert_ex() for single-string conversions, especially when "preflighting" is desired (returning the length of the complete output even if it does not fit into the target buffer).

Since :

6.0

Parameters:

[in]	converter	The converter that is used to convert from the UTF-16 pivot buffer to the target.
[in]	algorithmic_type	An i18n_ucnv_type_e constant identifying the desired source charset as a purely algorithmic converter. Those are converters for Unicode charsets like UTF-8, BOCU-1, SCSU, UTF-7, IMAP-mailbox-name, etc., as well as US-ASCII and ISO-8859-1.
[in]	target	Pointer to the output buffer.
[in]	target_capacity	Capacity of the target, in bytes.
[in]	source	Pointer to the input buffer.
[in]	source_length	Length of the input text, in bytes
[out]	output_length	Length of the complete output text in bytes, even if it exceeds the target_capacity and a I18N_ERROR_BUFFER_OVERFLOW is set.

Returns:

0 on success, otherwise a negative error value.

Return values:

I18N_ERROR_NONE	Successful
I18N_ERROR_INVALID_PARAMETER	Invalid function parameter
I18N_ERROR_BUFFER_OVERFLOW	A result would not fit in the supplied buffer

See also:

i18n_ucnv_to_algorithmic()

i18n_ucnv_convert_ex()

i18n_ucnv_convert()

i18n_ucnv_from_unicode()

i18n_ucnv_to_unicode()

i18n_ucnv_from_uchars()

i18n_ucnv_to_uchars()

Converts the Unicode string into a codepage string using an existing i18n_ucnv_h.

The output string is NUL-terminated if possible.

This function is a more convenient but less powerful version of i18n_ucnv_from_unicode(). It is only useful for whole strings, not for streaming conversion.

The maximum output buffer capacity required will be i18n_ucnv_get_max_bytes_for_string(src_length, i18n_ucnv_get_max_char_size(cnv)).

Since :

6.0

Parameters:

[in]	converter	An i18n_ucnv_h to be used (i18n_ucnv_reset_from_unicode() will be called)
[out]	dest	Destination string buffer, can be NULL if dest_capacity==0
[in]	dest_capacity	The number of chars available at dest
[in]	src	The input Unicode string
[in]	src_length	The input string length (the number of i18n_uchar characters) or -1 if NUL-terminated
[out]	length	The length (the number of bytes) of the output string, not counting the terminating NUL; if the length is greater than dest_capacity, then the string will not fit and a buffer of the indicated length would need to be passed in

Returns:

0 on success, otherwise a negative error value.

Return values:

I18N_ERROR_NONE	Successful
I18N_ERROR_INVALID_PARAMETER	Invalid function parameter
I18N_ERROR_BUFFER_OVERFLOW	A result would not fit in the supplied buffer

See also:

i18n_ucnv_from_unicode()

i18n_ucnv_convert()

i18n_ucnv_get_max_bytes_for_string()

Gets the number of i18n_uchar characters held in the converter's internal state because more input is needed for completing the conversion.

This function is useful for mapping semantics of ICU's converter interface to those of iconv, and this information is not needed for normal conversion.

Since :

6.0

Parameters:

[in]	converter	The converter in which the input is held.
[out]	number	The number of i18n_uchar characters in the state. -1 if an error is encountered.

Returns:

0 on success, otherwise a negative error value.

Return values:

I18N_ERROR_NONE	Successful
I18N_ERROR_INVALID_PARAMETER	Invalid function parameter

Converts an array of unicode characters to an array of codepage characters.

This function is optimized for converting a continuous stream of data in buffer-sized chunks, where the entire source and target does not fit in available buffers.

The source pointer is an in/out parameter. It starts out pointing where the conversion is to begin, and ends up pointing after the last i18n_uchar consumed.

Target similarly starts out pointer at the first available byte in the output buffer, and ends up pointing after the last byte written to the output.

The converter always attempts to consume the entire source buffer, unless the target buffer is full. When a successful error status has been returned, it means that all of the source buffer has been consumed. At that point, the caller should reset the source and source_limit pointers to point to the next chunk.

At the end of the stream (flush==TRUE), the input is completely consumed when *source==source_limit and no error code is set. The converter object is then automatically reset by this function. (This means that a converter need not be reset explicitly between data streams if it finishes the previous stream without errors.)

This is a stateful conversion. Additionally, even when all source data has been consumed, some data may be in the converters' internal state. Call this function repeatedly, updating the target pointers with the next empty chunk of target in case of a I18N_ERROR_BUFFER_OVERFLOW, and updating the source pointers with the next chunk of source when a successful error status is returned, until there are no more chunks of source data.

Since :

6.0

Parameters:

[in]	converter	An i18n_ucnv_h
[in,out]	target	I/O parameter. Input : Points to the beginning of the buffer to copy codepage characters to. Output : points to after the last codepage character copied to target.
[in]	target_limit	The pointer just after last of the target buffer
[in,out]	source	I/O parameter, pointer to pointer to the source Unicode character buffer.
[in]	source_limit	The pointer just after the last of the source buffer
[in]	offsets	If NULL is passed, nothing will happen to it, otherwise it needs to have the same number of allocated cells as target. Will fill in offsets from target to source pointer e.g: offsets[3] is equal to 6, it means that the target[3] was a result of transcoding source[6] For output data carried across calls, and other data without a specific source character (such as from escape sequences) -1 will be placed for offsets.
[in]	flush	Set to TRUE if the current source buffer is the last available chunk of the source, FALSE otherwise. Note that if a failing status is returned, this function may have to be called multiple times with flush set to TRUE until the source buffer is consumed.

Returns:

0 on success, otherwise a negative error value.

Return values:

I18N_ERROR_NONE	Successful
I18N_ERROR_INVALID_PARAMETER	Invalid function parameter
I18N_ERROR_BUFFER_OVERFLOW	A result would not fit in the supplied buffer

See also:

i18n_ucnv_convert()

i18n_ucnv_get_min_char_size()

Gets the name of the alias at given index of alias list.

This method only enumerates the listed entries in the alias file.

Since :

6.0

Remarks:

The returned name should be freed by the caller with free() function.

Parameters:

[in]	alias	Alias name
[in]	index	Index in alias list
[out]	name	The name of the alias at given index

Returns:

0 on success, otherwise a negative error value.

Return values:

I18N_ERROR_NONE	Successful
I18N_ERROR_INVALID_PARAMETER	Invalid function parameter

Gets the list of alias names for the given alias.

This method only enumerates the listed entries in the alias file.

Since :

6.0

Remarks:

The aliases should be released using free().

Parameters:

[in]	alias	Alias name
[out]	aliases	Aliases is a pointer to an array of i18n_ucnv_count_aliases() string-pointers (const char *) that will be filled in. The strings themselves are owned by the library.

Returns:

0 on success, otherwise a negative error value.

Return values:

I18N_ERROR_NONE	Successful
I18N_ERROR_INVALID_PARAMETER	Invalid function parameter

Gets the canonical converter name of the specified converter from a list of all available converters contaied in the alias file. All converters in this list can be created.

Since :

6.0

Remarks:

The returned name should be freed by the caller with free() function.

Parameters:

[in]	index	The index to a converter available on the system (in the range [0..i18n_ucnv_count_available()-1])
[out]	name	A pointer a string (library owned), or NULL if the index is out of bounds.

Returns:

0 on success, otherwise a negative error value.

Return values:

I18N_ERROR_NONE	Successful
I18N_ERROR_INVALID_PARAMETER	Invalid function parameter

See also:

i18n_ucnv_count_available()

Gets the internal canonical converter name of the tagged alias.

This is the opposite of i18n_ucnv_create_standard_names(), which returns the tagged alias given the canonical name.

Example alias table: conv alias1 { STANDARD1 } alias2 { STANDARD1* }

name of i18n_ucnv_get_canonical_name("alias1", "STANDARD1", &name) from example alias table: "conv"

Since :

6.0

Remarks:

The name should be freed by the caller with free() function.

Parameters:

[in]	alias	Alias name
[in]	standard	The name of the standard governing the names; MIME and IANA are such standards
[out]	name	The canonical converter name; if a standard or alias name cannot be determined, then NULL is returned. The returned string is owned by the library.

Returns:

0 on success, otherwise a negative error value.

Return values:

I18N_ERROR_NONE	Successful
I18N_ERROR_INVALID_PARAMETER	Invalid function parameter

See also:

i18n_ucnv_get_standard_name()

Gets a codepage number associated with the converter.

This is not guaranteed to be the one used to create the converter. Some converters do not represent platform registered codepages and return zero for the codepage number. The error code fill-in parameter indicates if the codepage number is available. Does not check if the converter is NULL or if converter's data table is NULL.

Important: The use of CCSIDs is not recommended because it is limited to only two platforms in principle and only one (UCNV_IBM) in the current ICU converter API. Also, CCSIDs are insufficient to identify IBM Unicode conversion tables precisely. For more details see i18n_ucnv_create_ccsid().

Since :

6.0

Parameters:

[in]	converter	An i18n_ucnv_h
[out]	codepage_number	If any error occurs, -1 will get otherwise, the codepage number will be returned

Returns:

0 on success, otherwise a negative error value.

Return values:

I18N_ERROR_NONE	Successful
I18N_ERROR_INVALID_PARAMETER	Invalid function parameter

See also:

i18n_ucnv_create_ccsid()

i18n_ucnv_get_platform()

Returns the current default converter name.

If you want to create a default converter, you do not need to use this function. It is faster if you pass a NULL argument to i18n_ucnv_create() the default converter.

Since :

6.0

Returns:

The current default converter name. Storage owned by the library

See also:

i18n_ucnv_set_default_name()

Gets the display name of the converter passed in based on the Locale passed in.

If the locale contains no display name, the internal ASCII name will be filled in.

Since :

6.0

Parameters:

[in]	converter	An i18n_ucnv_h
[in]	display_locale	The specific Locale we want to localized for.
[in]	display_name	User provided buffer to be filled in.
[in]	display_name_capacity	Size of display_name Buffer.
[out]	display_name_len	The number of i18n_uchar characters needed in display_name.

Returns:

0 on success, otherwise a negative error value.

Return values:

I18N_ERROR_NONE	Successful
I18N_ERROR_INVALID_PARAMETER	Invalid function parameter

See also:

i18n_ucnv_get_name()

Fills in the output parameter, err_bytes, with the error characters from the last failing conversion.

Since :

6.0

Parameters:

[in]	converter	An i18n_ucnv_h
[in]	err_bytes	The codepage bytes which were in error.
[in,out]	len	Input the capacity of err_bytes, on output the number of bytes which were copied to it.

Returns:

0 on success, otherwise a negative error value.

Return values:

I18N_ERROR_NONE	Successful
I18N_ERROR_INVALID_PARAMETER	Invalid function parameter
I18N_ERROR_INDEX_OUTOFBOUNDS	Trying to access the index that is out of bounds

Fills in the output parameter, err_uchars, with the error characters from the last failing conversion.

Since :

6.0

Parameters:

[in]	converter	An i18n_ucnv_h
[in]	err_uchars	The i18n_uchar which were in error.
[in,out]	len	Input the capacity of err_uchars, on output the number of i18n_uchar characters which were copied to it.

Returns:

0 on success, otherwise a negative error value.

Return values:

I18N_ERROR_NONE	Successful
I18N_ERROR_INVALID_PARAMETER	Invalid function parameter
I18N_ERROR_INDEX_OUTOFBOUNDS	Trying to access the index that is out of bounds

Calculates the size of a buffer for conversion from Unicode to a charset.

The calculated size is guaranteed to be sufficient for this conversion.

It takes into account initial and final non-character bytes that are output by some converters.

Since :

6.0

Parameters:

[in]	length	The number of i18n_uchar characters to be converted.
[in]	max_char_size	Return value from i18n_ucnv_get_max_char_size() for the converter that will be used.

Returns:

Size (in bytes) of a buffer that will be large enough to hold the output bytes of converting length i18n_uchar with the converter that returned the max_char_size.

See also:

i18n_ucnv_get_max_char_size()

Gets the maximum number of bytes that are output per i18n_uchar in conversion from Unicode using this converter.

The returned number can be used with i18n_ucnv_get_max_bytes_for_string() to calculate the size of a target buffer for conversion from Unicode.

Note: Before ICU 2.8, this function did not return reliable numbers for some stateful converters (EBCDIC_STATEFUL, ISO-2022) and LMBCS.

This number may not be the same as the maximum number of bytes per "conversion unit". In other words, it may not be the intuitively expected number of bytes per character that would be published for a charset, and may not fulfill any other purpose than the allocation of an output buffer of guaranteed sufficient size for a given input length and converter.

Examples for special cases that are taken into account:

• Supplementary code points may convert to more bytes than BMP code points. This function returns bytes per i18n_uchar (UTF-16 code unit), not per Unicode code point, for efficient buffer allocation.
  
• State-shifting output (SI/SO, escapes, etc.) from stateful converters.
• When m input i18n_uchar are converted to n output bytes, then the maximum m/n is taken into account.

The number returned here does not take into account (see i18n_ucnv_get_max_bytes_for_string()):

• initial and final non-character bytes that are output by some converters (automatic BOMs, initial escape sequence, final SI, etc.)

Examples for returned values:

• SBCS charsets: 1
• Shift-JIS: 2
• UTF-16: 2 (2 per BMP, 4 per surrogate pair, BOM not counted)
• UTF-8: 3 (3 per BMP, 4 per surrogate pair)]n
• EBCDIC_STATEFUL (EBCDIC mixed SBCS/DBCS): 3 (SO + DBCS)
• ISO-2022: 3 (always outputs UTF-8)
• ISO-2022-JP: 6 (4-byte escape sequences + DBCS)
• ISO-2022-CN: 8 (4-byte designator sequences + 2-byte SS2/SS3 + DBCS)

  Since :

  6.0

  Parameters:

  [in]	converter	An i18n_ucnv_h
  [out]	size	The maximum number of bytes per i18n_uchar (16 bit code unit) that are output by i18n_ucnv_from_unicode(), to be used together with i18n_ucnv_get_max_bytes_for_string() for buffer allocation.

  Returns:

  0 on success, otherwise a negative error value.

  Return values:

  I18N_ERROR_NONE	Successful
  I18N_ERROR_INVALID_PARAMETER	Invalid function parameter

  See also:

  i18n_ucnv_get_max_bytes_for_string()

  i18n_ucnv_get_min_char_size()

Gets the minimum byte length (per codepoint) for characters in this codepage.

This is usually either 1 or 2.

Since :

6.0

Parameters:

[in]	converter	An i18n_ucnv_h
[out]	size	The minimum number of bytes per codepoint allowed by this particular converter.

Returns:

0 on success, otherwise a negative error value.

Return values:

I18N_ERROR_NONE	Successful
I18N_ERROR_INVALID_PARAMETER	Invalid function parameter

See also:

i18n_ucnv_get_max_char_size()

Gets the internal, canonical name of the converter (zero-terminated).

The lifetime of the returned string will be that of the converter passed to this function.

Since :

6.0

Remarks:

The returned name should be freed by the caller with free() function.

Parameters:

[in]	converter	An i18n_ucnv_h
[out]	name	The internal name of the converter

Returns:

0 on success, otherwise a negative error value.

Return values:

I18N_ERROR_NONE	Successful
I18N_ERROR_INVALID_PARAMETER	Invalid function parameter

See also:

i18n_ucnv_get_display_name()

Converts a codepage buffer into Unicode one character at a time.

The input is completely consumed when the I18N_ERROR_INDEX_OUTOFBOUNDS is set.

Advantage compared to i18n_ucnv_to_unicode() or i18n_ucnv_to_uchars():

• Faster for small amounts of data, for most converters, e.g., US-ASCII, ISO-8859-1, UTF-8/16/32, and most "normal" charsets. (For complex converters, e.g., SCSU, UTF-7 and ISO 2022 variants, it uses i18n_ucnv_to_unicode() internally.)
  
• Convenient.

Limitations compared to i18n_ucnv_to_unicode():

• Always assumes flush=TRUE. This makes i18n_ucnv_get_next_uchar() unsuitable for "streaming" conversion, that is, for where the input is supplied in multiple buffers, because i18n_ucnv_get_next_uchar() will assume the end of the input at the end of the first buffer.
  
• Does not provide offset output.

It is possible to "mix" i18n_ucnv_get_next_uchar() and i18n_ucnv_to_unicode() because i18n_ucnv_get_next_uchar() uses the current state of the converter (unlike i18n_ucnv_to_uchars() which always resets first). However, if i18n_ucnv_get_next_uchar() is called after i18n_ucnv_to_unicode() stopped in the middle of a character sequence (with flush=FALSE), then i18n_ucnv_get_next_uchar() will always use the slower i18n_ucnv_to_unicode() internally until the next character boundary. (This is new in ICU 2.6. In earlier releases, i18n_ucnv_get_next_uchar() had to start at a character boundary.)

Instead of using i18n_ucnv_get_next_uchar(), it is recommended to convert using i18n_ucnv_to_unicode() or i18n_ucnv_to_uchars() and then iterate over the text using U16_NEXT() or an i18n_uchar_iter_h or a C++ CharacterIterator or similar. This allows streaming conversion and offset output, for example.

Handling of surrogate pairs and supplementary-plane code points:
There are two different kinds of codepages that provide mappings for surrogate characters:

• Codepages like UTF-8, UTF-32, and GB 18030 provide direct representations for Unicode code points U+10000-U+10ffff as well as for single surrogates U+d800-U+dfff. Each valid sequence will result in exactly one returned code point. If a sequence results in a single surrogate, then that will be returned by itself, even if a neighboring sequence encodes the matching surrogate.
  
• Codepages like SCSU and LMBCS (and UTF-16) provide direct representations only for BMP code points including surrogates. Code points in supplementary planes are represented with two sequences, each encoding a surrogate. For these codepages, matching pairs of surrogates will be combined into single code points for returning from this function. (Note that SCSU is actually a mix of these codepage types.)
  

  Since :

  6.0

  Parameters:

  [in]	converter	An i18n_ucnv_h
  [in]	source	The address of a pointer to the codepage buffer, will be updated to point after the bytes consumed in the conversion call.
  [in]	source_limit	Points to the end of the input buffer
  [out]	result	An i18n_uchar32 resulting from the partial conversion of source

  Returns:

  0 on success, otherwise a negative error value.

  Return values:

  I18N_ERROR_NONE	Successful
  I18N_ERROR_INVALID_PARAMETER	Invalid function parameter
  I18N_ERROR_BUFFER_OVERFLOW	A result would not fit in the supplied buffer
  I18N_ERROR_INDEX_OUTOFBOUNDS	Trying to access the index that is out of bounds

  See also:

  i18n_ucnv_to_unicode()

  i18n_ucnv_to_uchars()

  i18n_ucnv_convert()

Gets a codepage platform associated with the converter.

Currently, only I18N_UCNV_IBM will be returned. Does not test if the converter is NULL or if converter's data table is NULL.

Since :

6.0

Parameters:

[in]	converter	An i18n_ucnv_h
[out]	platform	The codepage platform

Returns:

0 on success, otherwise a negative error value.

Return values:

I18N_ERROR_NONE	Successful
I18N_ERROR_INVALID_PARAMETER	Invalid function parameter

Gets the name of the standard at given index of standard list.

Since :

6.0

Remarks:

The name should be freed by the caller with free() function.

Parameters:

[in]	index	Index in standard list
[out]	name	The name of the standard at given index. Owned by the library.

Returns:

0 on success, otherwise a negative error value.

Return values:

I18N_ERROR_NONE	Successful
I18N_ERROR_INVALID_PARAMETER	Invalid function parameter
I18N_ERROR_INDEX_OUTOFBOUNDS	Trying to access the index that is out of bounds

Gets a standard name for a given converter name.

Example alias table: conv alias1 { STANDARD1 } alias2 { STANDARD1* }

name of i18n_ucnv_get_standard_name("conv", "STANDARD1", &name) from example alias table: "alias2"

Since :

6.0

Remarks:

The name should be freed by the caller with free() function.

Parameters:

[in]	cnv_name	Original converter name
[in]	standard	The name of the standard governing the names; MIME and IANA are such standards
[out]	name	The standard converter name; if a standard converter name cannot be determined, then NULL is returned. Owned by the library.

Returns:

0 on success, otherwise a negative error value.

Return values:

I18N_ERROR_NONE	Successful
I18N_ERROR_INVALID_PARAMETER	Invalid function parameter

Gets the "starter" (lead) bytes for converters of type MBCS.

Will fill in an I18N_ERROR_INVALID_PARAMETER if converter passed in is not MBCS. Fills in an array of type i18n_ubool, with the value of the byte as offset to the array. For example, if (starters[0x20] == TRUE) at return, it means that the byte 0x20 is a starter byte in this converter. Context pointers are always owned by the caller.

Since :

6.0

Parameters:

[in]	converter	An i18n_ucnv_h of type MBCS
[in,out]	starters	An array of size 256 to be filled in

Returns:

0 on success, otherwise a negative error value.

Return values:

I18N_ERROR_NONE	Successful
I18N_ERROR_INVALID_PARAMETER	Invalid function parameter

See also:

i18n_ucnv_get_type()

Fills in the output parameter, sub_chars, with the substitution characters as multiple bytes.

If i18n_ucnv_set_subst_chars() set a Unicode string because the converter is stateful, then sub_chars will be an empty string.

Since :

6.0

Parameters:

[in]	converter	An i18n_ucnv_h
[out]	sub_chars	The substitution characters
[in,out]	len	On input the capacity of sub_chars, on output the number of bytes copied to it

Returns:

0 on success, otherwise a negative error value.

Return values:

I18N_ERROR_NONE	Successful
I18N_ERROR_INVALID_PARAMETER	Invalid function parameter
I18N_ERROR_INDEX_OUTOFBOUNDS	Trying to access the index that is out of bounds

See also:

i18n_ucnv_set_subst_chars()

i18n_ucnv_set_subst_string()

Gets the type of the converter e.g. SBCS, MBCS, DBCS, UTF8, UTF16_BE, UTF16_LE, ISO_2022, EBCDIC_STATEFUL, LATIN_1.

Since :

6.0

Parameters:

[in]	converter	An i18n_ucnv_h
[out]	type	The type of the converter

Returns:

0 on success, otherwise a negative error value.

Return values:

I18N_ERROR_NONE	Successful
I18N_ERROR_INVALID_PARAMETER	Invalid function parameter

Gets the set of Unicode code points that can be converted by an ICU converter.

Returns one of several kinds of set:

1. UCNV_ROUNDTRIP_SET
The set of all Unicode code points that can be roundtrip-converted (converted without any data loss) with the converter. This set will not include code points that have fallback mappings or are only the result of reverse fallback mappings. This set will also not include PUA code points with fallbacks, although i18n_ucnv_from_unicode() will always uses those mappings despite i18n_ucnv_set_fallback().

This is useful for example for

• checking that a string or document can be roundtrip-converted with a converter, without/before actually performing the conversion
• testing if a converter can be used for text for typical text for a certain locale, by comparing its roundtrip set with the set of ExemplarCharacters from ICU's locale data or other sources
  

2. UCNV_ROUNDTRIP_AND_FALLBACK_SET
The set of all Unicode code points that can be converted with the converter (i18n_ucnv_from_unicode()) when fallbacks are turned on (see i18n_ucnv_set_fallback()). This set includes all code points with roundtrips and fallbacks (but not reverse fallbacks).

In the future, there may be more i18n_ucnv_unicode_set_e choices to select sets with different properties.

Since :

6.0

Parameters:

[in]	converter	An i18n_ucnv_h for which a set is requested.
[out]	set_fill_in	A valid i18n_uset_h *. It will be cleared by this function before the converter's specific set is filled into the i18n_uset_h.
[in]	which_set	An i18n_ucnv_unicode_set_e selector; currently I18N_UCNV_ROUNDTRIP_SET is the only supported value.

Returns:

0 on success, otherwise a negative error value.

Return values:

I18N_ERROR_NONE	Successful
I18N_ERROR_INVALID_PARAMETER	Invalid function parameter

See also:

i18n_ucnv_unicode_set_e

i18n_uset_create()

i18n_uset_destroy()

Determines if the converter contains ambiguous mappings of the same character or not.

Since :

6.0

Parameters:

[in]	converter	The converter to be tested
[out]	result	TRUE if the converter contains ambiguous mapping of the same character, FALSE otherwise.

Returns:

0 on success, otherwise a negative error value.

Return values:

I18N_ERROR_NONE	Successful
I18N_ERROR_INVALID_PARAMETER	Invalid function parameter

Gets whether or not the charset of the converter has a fixed number of bytes per charset character.

An example of this are converters that are of the type I18N_UCNV_SBCS or I18N_UCNV_DBCS. Another example is UTF-32 which is always 4 bytes per character. A Unicode code point may be represented by more than one UTF-8 or UTF-16 code unit but a UTF-32 converter encodes each code point with 4 bytes. Note: This method is not intended to be used to determine whether the charset has a fixed ratio of bytes to Unicode codes units for any particular Unicode encoding form.

Since :

6.0

Parameters:

[in]	converter	The converter to be tested.
[out]	is_fixed_width	TRUE if the converter is fixed-width.

Returns:

0 on success, otherwise a negative error value.

Return values:

I18N_ERROR_NONE	Successful
I18N_ERROR_INVALID_PARAMETER	Invalid function parameter

Resets the state of a converter to the default state.

This is used in the case of an error, to restart a conversion from a known default state. It will also empty the internal output buffers.

Since :

6.0

Parameters:

[in]

converter

An i18n_ucnv_h

Returns:

0 on success, otherwise a negative error value.

Return values:

I18N_ERROR_NONE	Successful
I18N_ERROR_INVALID_PARAMETER	Invalid function parameter

Resets the from-Unicode part of a converter state to the default state.

This is used in the case of an error to restart a conversion from Unicode to a known default state. It will also empty the internal output buffers used for the conversion from Unicode codepoints.

Since :

6.0

Parameters:

[in]

converter

An i18n_ucnv_h

Returns:

0 on success, otherwise a negative error value.

Return values:

I18N_ERROR_NONE	Successful
I18N_ERROR_INVALID_PARAMETER	Invalid function parameter

Resets the to-Unicode part of a converter state to the default state.

This is used in the case of an error to restart a conversion to Unicode to a known default state. It will also empty the internal output buffers used for the conversion to Unicode codepoints.

Since :

6.0

Parameters:

[in]

converter

An i18n_ucnv_h

Returns:

0 on success, otherwise a negative error value.

Return values:

I18N_ERROR_NONE	Successful
I18N_ERROR_INVALID_PARAMETER	Invalid function parameter

Clones converter thread safely.

Since :

6.0

Remarks:

The cloned_converter should be released using i18n_ucnv_destroy().

Parameters:

[in]	converter	Converter to be cloned.
[out]	cloned_converter	The created i18n_ucnv_h, or NULL if an error occurred.

Returns:

0 on success, otherwise a negative error value.

Return values:

I18N_ERROR_NONE	Successful
I18N_ERROR_INVALID_PARAMETER	Invalid function parameter

Sets the current default converter name.

This function is not thread safe.

DO NOT call this function when ANY I18N function is being used from more than one thread! This function sets the current default converter name. If this function needs to be called, it should be called during application initialization. Most of the time, the results from i18n_ucnv_get_default_name() or i18n_ucnv_create() with a NULL string argument is sufficient for your application.

Since :

6.0

Parameters:

[in]

name

The converter name to be the default (must be known by ICU). In case of name is a NULL, It resets to the default codepage.

See also:

i18n_ucnv_get_default_name()

Sets the converter to use fallback mappings or not.

Regardless of this flag, the converter will always use fallbacks from Unicode Private Use code points, as well as reverse fallbacks (to Unicode).

Since :

6.0

Parameters:

[in]	converter	The converter to set the fallback mapping usage on.
[in]	uses_fallback	TRUE if the user wants the converter to take advantage of the fallback mapping, FALSE otherwise.

Returns:

0 on success, otherwise a negative error value.

Return values:

I18N_ERROR_NONE	Successful
I18N_ERROR_INVALID_PARAMETER	Invalid function parameter

Sets the substitution chars when converting from unicode to a codepage.

The substitution is specified as a string of 1-4 bytes, and may contain NULL bytes. The sub_chars must represent a single character. The caller needs to know the byte sequence of a valid character in the converter's charset. For some converters, for example some ISO 2022 variants, only single-byte substitution characters may be supported. The newer i18n_ucnv_set_subst_string() function relaxes these limitations.

Since :

6.0

Parameters:

[in]	converter	An i18n_ucnv_h
[in]	sub_chars	The substitution character byte sequence we want set.
[in]	len	The number of bytes in sub_chars

Returns:

0 on success, otherwise a negative error value.

Return values:

I18N_ERROR_NONE	Successful
I18N_ERROR_INVALID_PARAMETER	Invalid function parameter
I18N_ERROR_INDEX_OUTOFBOUNDS	Trying to access the index that is out of bounds

See also:

i18n_ucnv_get_subst_chars()

i18n_ucnv_set_subst_string()

Sets a substitution string for converting from Unicode to a charset.

The caller need not know the charset byte sequence for each charset.

Unlike i18n_ucnv_set_subst_chars() which is designed to set a charset byte sequence for a single character, this function takes a Unicode string with zero, one or more characters, and immediately verifies that the string can be converted to the charset. If not, or if the result is too long (more than 32 bytes), then the function returns with an error accordingly.

Also unlike i18n_ucnv_set_subst_chars(), this function works for stateful charsets by converting on the fly at the point of substitution rather than setting a fixed byte sequence.

Since :

6.0

Parameters:

[in]	converter	An i18n_ucnv_h
[in]	s	The Unicode string.
[in]	len	The number of i18n_uchar characters in s, or -1 for a NUL-terminated string.

Returns:

0 on success, otherwise a negative error value.

Return values:

I18N_ERROR_NONE	Successful
I18N_ERROR_INVALID_PARAMETER	Invalid function parameter

See also:

i18n_ucnv_get_subst_chars()

i18n_ucnv_set_subst_chars()

Converts from one external charset to another.

Internally, the text is converted to and from the 16-bit Unicode "pivot" using i18n_ucnv_convert_ex(). i18n_ucnv_to_algorithmic() works exactly like i18n_ucnv_convert() except that the two converters need not be looked up and created completely.

The source-to-pivot conversion uses the converter i18n_ucnv_h. The pivot-to-target conversion uses a purely algorithmic converter according to the specified type, e.g., I18N_UCNV_UTF8 for a UTF-8 converter.

Internally, the algorithmic converter is created and destroyed for each function call, which is more efficient than using the public i18n_ucnv_create() but somewhat less efficient than only resetting an existing converter and using i18n_ucnv_convert_ex().

This function is more convenient than i18n_ucnv_convert_ex() for single-string conversions, especially when "preflighting" is desired (returning the length of the complete output even if it does not fit into the target buffer).

Since :

6.0

Parameters:

[in]	algorithmic_type	An i18n_ucnv_type_e constant identifying the desired target charset as a purely algorithmic converter. Those are converters for Unicode charsets like UTF-8, BOCU-1, SCSU, UTF-7, IMAP-mailbox-name, etc., as well as US-ASCII and ISO-8859-1.
[in]	converter	The converter that is used to convert from the source to the UTF-16 pivot buffer.
[in]	target	Pointer to the output buffer.
[in]	target_capacity	Capacity of the target, in bytes.
[in]	source	Pointer to the input buffer.
[in]	source_length	Length of the input text, in bytes
[out]	output_length	Length of the complete output text in bytes, even if it exceeds the target_capacity and a I18N_ERROR_BUFFER_OVERFLOW is set.

Returns:

0 on success, otherwise a negative error value.

Return values:

I18N_ERROR_NONE	Successful
I18N_ERROR_INVALID_PARAMETER	Invalid function parameter
I18N_ERROR_BUFFER_OVERFLOW	A result would not fit in the supplied buffer

See also:

i18n_ucnv_from_algorithmic()

i18n_ucnv_convert_ex()

i18n_ucnv_convert()

i18n_ucnv_from_unicode()

i18n_ucnv_to_unicode()

i18n_ucnv_from_uchars()

i18n_ucnv_to_uchars()

Converts the codepage string into a Unicode string using an existing i18n_ucnv_h.

The output string is NUL-terminated if possible.

This function is a more convenient but less powerful version of i18n_ucnv_to_unicode(). It is only useful for whole strings, not for streaming conversion.

The maximum output buffer capacity required will be 2*src_length (each char may be converted into a surrogate pair).

Since :

6.0

Parameters:

[in]	converter	An i18n_ucnv_h to be used (i18n_ucnv_reset_to_unicode() will be called)
[out]	dest	Destination string buffer, can be NULL if dest_capacity==0
[in]	dest_capacity	The number of i18n_uchar characters available at dest
[in]	src	The input codepage string
[in]	src_length	The input string length (the number of i18n_uchar characters) or -1 if NUL-terminated
[out]	output_length	The length (the number of i18n_uchar characters) of the output string, not counting the terminating NUL; if the output_length is greater than dest_capacity, then the string will not fit and a buffer of the indicated length would need to be passed in

Returns:

0 on success, otherwise a negative error value.

Return values:

I18N_ERROR_NONE	Successful
I18N_ERROR_INVALID_PARAMETER	Invalid function parameter
I18N_ERROR_BUFFER_OVERFLOW	A result would not fit in the supplied buffer

See also:

i18n_ucnv_to_unicode()

i18n_ucnv_convert()

Gets the number of char held in the converter's internal state because more input is needed for completing the conversion.

This function is useful for mapping semantics of ICU's converter interface to those of iconv, and this information is not needed for normal conversion.

Since :

6.0

Parameters:

[in]	converter	The converter in which the input is held as internal state.
[out]	number	The number of chars in the state. -1 if an error is encountered.

Returns:

0 on success, otherwise a negative error value.

Return values:

I18N_ERROR_NONE	Successful
I18N_ERROR_INVALID_PARAMETER	Invalid function parameter

Converts a buffer of codepage bytes into an array of unicode i18n_uchar characters.

This function is optimized for converting a continuous stream of data in buffer-sized chunks, where the entire source and target does not fit in available buffers.

The source pointer is an in/out parameter. It starts out pointing where the conversion is to begin, and ends up pointing after the last byte of source consumed.

Target similarly starts out pointer at the first available i18n_uchar in the output buffer, and ends up pointing after the last i18n_uchar written to the output. It does NOT necessarily keep i18n_uchar sequences together.

The converter always attempts to consume the entire source buffer, unless the target buffer is full. When a successful error status has been returned, it means that all of the source buffer has been consumed. At that point, the caller should reset the source and source_limit pointers to point to the next chunk.

At the end of the stream (flush==TRUE), the input is completely consumed when *source==source_limit and no error code is set. The converter object is then automatically reset by this function. (This means that a converter need not be reset explicitly between data streams if it finishes the previous stream without errors.)

This is a stateful conversion. Additionally, even when all source data has been consumed, some data may be in the converters' internal state. Call this function repeatedly, updating the target pointers with the next empty chunk of target in case of a I18N_ERROR_BUFFER_OVERFLOW, and updating the source pointers with the next chunk of source when a successful error status is returned, until there are no more chunks of source data.

Since :

6.0

Parameters:

[in]	converter	An i18n_ucnv_h
[in,out]	target	I/O parameter. Input : Points to the beginning of the buffer to copy i18n_uchar into. Output : points to after the last i18n_uchar copied
[in]	target_limit	the pointer just after the end of the target buffer
[in,out]	source	I/O parameter, pointer to pointer to the source codepage buffer.
[in]	source_limit	The pointer to the byte after the end of the source buffer
[in]	offsets	If NULL is passed, nothing will happen to it, otherwise it needs to have the same number of allocated cells as target. Will fill in offsets from target to source pointer e.g: offsets[3] is equal to 6, it means that the target[3] was a result of transcoding source[6] For output data carried across calls, and other data without a specific source character (such as from escape sequences) -1 will be placed for offsets
[in]	flush	Set to TRUE if the current source buffer is the last available chunk of the source, FALSE otherwise. Note that if a failing status is returned, this function may have to be called multiple times with flush set to TRUE until the source buffer is consumed.

Returns:

0 on success, otherwise a negative error value.

Return values:

I18N_ERROR_NONE	Successful
I18N_ERROR_INVALID_PARAMETER	Invalid function parameter
I18N_ERROR_BUFFER_OVERFLOW	A result would not fit in the supplied buffer

See also:

i18n_ucnv_convert()

i18n_ucnv_get_min_char_size()

i18n_ucnv_get_next_uchar()

Determines if the converter uses fallback mappings or not.

This flag has restrictions, see i18n_ucnv_set_fallback().

Since :

6.0

Parameters:

[in]	converter	The converter to be tested.
[out]	result	TRUE if the converter uses fallback, FALSE otherwise.

Returns:

0 on success, otherwise a negative error value.

Return values:

I18N_ERROR_NONE	Successful
I18N_ERROR_INVALID_PARAMETER	Invalid function parameter