Tizen Native API
6.5
|
The Uchar module provides low-level access to the Unicode Character Database.
Required Header
#include <utils_i18n.h>
Overview
The Uchar module provides low-level access to the Unicode Character Database.
Sample Code 1
Gets the property value of 'east asian width' among an enumerated property, and the unicode allocation block that contains the character.
int ret = I18N_ERROR_NONE; i18n_uchar32 code_point = 0; int property_value = 0; i18n_uchar_u_east_asian_width_e east_asian_width = I18N_UCHAR_U_EA_NEUTRAL; i18n_uchar_ublock_code_e block_code = I18N_UCHAR_UBLOCK_NO_BLOCK; // How to get the east asian width type for 's' code_point = 0x73; // 's' ret = i18n_uchar_get_int_property_value(code_point, I18N_UCHAR_EAST_ASIAN_WIDTH, &property_value); if (ret != I18N_ERROR_NONE) { dlog_print(DLOG_INFO, LOG_TAG, "Error occurred!!\n"); } else { east_asian_width = (i18n_uchar_u_east_asian_width_e)property_value; dlog_print(DLOG_INFO, LOG_TAG, "East Asian Width Type for ( %.4x ) is ( %d )\n", code_point, east_asian_width); // East Asian Width Type for ( 0073 ) is ( 4 ) which is I18N_UCHAR_U_EA_NARROW } // How to get the block code for 's' ret = i18n_uchar_get_ublock_code(code_point, &block_code); if (ret != I18N_ERROR_NONE) { dlog_print(DLOG_INFO, LOG_TAG, "Error occurred!!\n"); } else { dlog_print(DLOG_INFO, LOG_TAG, "block name for ( %.4x ) is ( %d )\n", code_point, block_code); // block code for ( 0073 ) is ( 1 ) which is I18N_UCHAR_UBLOCK_BASIC_LATIN } // How to get the east asian width type for 'sung' as ideographs code_point = 0x661F; // 'sung' as ideographs ret = i18n_uchar_get_int_property_value(code_point, I18N_UCHAR_EAST_ASIAN_WIDTH, &property_value); if (ret != I18N_ERROR_NONE) { dlog_print(DLOG_INFO, LOG_TAG, "Error occurred!!\n"); } else { east_asian_width = (i18n_uchar_u_east_asian_width_e)property_value; dlog_print(DLOG_INFO, LOG_TAG, "East Asian Width Type for ( %.4x ) is ( %d )\n", code_point, east_asian_width); // East Asian Width Type for ( 661f ) is ( 5 ) which is I18N_UCHAR_U_EA_WIDE } // How to get the block code for 'sung' as ideographs ret = i18n_uchar_get_ublock_code(code_point, &block_code); if (ret != I18N_ERROR_NONE) { dlog_print(DLOG_INFO, LOG_TAG, "Error occurred!!\n"); } else { dlog_print(DLOG_INFO, LOG_TAG, "block name for ( %.4x ) is ( %d )\n", code_point, block_code); // block code for ( 661f ) is ( 71 ) which is I18N_UCHAR_UBLOCK_CJK_UNIFIED_IDEOGRAPHS } // How to get the east asian width type for 'sung' as hangul code_point = 0xC131; // 'sung' as hangul ret = i18n_uchar_get_int_property_value(code_point, I18N_UCHAR_EAST_ASIAN_WIDTH, &property_value); if (ret != I18N_ERROR_NONE) { dlog_print(DLOG_INFO, LOG_TAG, "Error occurred!!\n"); } else { east_asian_width = (i18n_uchar_u_east_asian_width_e)property_value; dlog_print(DLOG_INFO, LOG_TAG, "East Asian Width Type for ( %.4x ) is ( %d )\n", code_point, east_asian_width); // East Asian Width Type for ( c131 ) is ( 5 ) which is I18N_UCHAR_U_EA_WIDE } // How to get the block code for 'sung' as hangul ret = i18n_uchar_get_ublock_code(code_point, &block_code); if (ret != I18N_ERROR_NONE) { dlog_print(DLOG_INFO, LOG_TAG, "Error occurred!!\n"); } else { dlog_print(DLOG_INFO, LOG_TAG, "block name for ( %.4x ) is ( %d )\n", code_point, block_code); // block code for ( c131 ) is ( 74 ) which is I18N_UCHAR_UBLOCK_HANGUL_SYLLABLES }
Functions | |
int | i18n_uchar_get_int_property_value (i18n_uchar32 c, i18n_uchar_uproperty_e which, int32_t *property_val) |
Gets the property value for an enumerated property for a code point. | |
int | i18n_uchar_get_ublock_code (i18n_uchar32 c, i18n_uchar_ublock_code_e *block_val) |
Gets the Unicode allocation block that contains the character. | |
int | i18n_uchar_has_binary_property (i18n_uchar32 c, i18n_uchar_uproperty_e which, i18n_ubool *has_binary_property) |
Checks a binary unicode property for a code point. | |
int | i18n_uchar_is_alphabetic (i18n_uchar32 c, i18n_ubool *is_alphabetic) |
Checks if a code point has the Alphabetic Unicode unicode property. | |
int | i18n_uchar_is_lowercase (i18n_uchar32 c, i18n_ubool *is_lowercase) |
Checks if a code point has the Lowercase Unicode property. | |
int | i18n_uchar_is_uppercase (i18n_uchar32 c, i18n_ubool *is_uppercase) |
Checks if a code point has the Uppercase Unicode property. | |
int | i18n_uchar_is_white_space (i18n_uchar32 c, i18n_ubool *is_white_space) |
Checks if a code point has the White_Space Unicode property. | |
int | i18n_uchar_get_int_property_min_value (i18n_uchar_uproperty_e which, int32_t *int_min_value) |
Gets the minimum value for an enumerated/integer/binary Unicode property. | |
int | i18n_uchar_get_int_property_max_value (i18n_uchar_uproperty_e which, int32_t *int_max_value) |
Gets the maximum value for an enumerated/integer/binary Unicode property. | |
int | i18n_uchar_get_numeric_value (i18n_uchar32 c, double *numeric_val) |
Gets the numeric value for a Unicode code point as defined in the Unicode Character Database. | |
int | i18n_uchar_is_lower (i18n_uchar32 c, i18n_ubool *is_lower) |
Determines whether the specified code point has the general category "Ll" (lowercase letter). | |
int | i18n_uchar_is_upper (i18n_uchar32 c, i18n_ubool *is_upper) |
Determines whether the specified code point has the general category "Lu" (uppercase letter). | |
int | i18n_uchar_is_title (i18n_uchar32 c, i18n_ubool *is_title) |
Determines whether the specified code point is a titlecase letter. | |
int | i18n_uchar_is_digit (i18n_uchar32 c, i18n_ubool *is_digit) |
Determines whether the specified code point is a digit character according to Java. | |
int | i18n_uchar_is_alpha (i18n_uchar32 c, i18n_ubool *is_alpha) |
Determines whether the specified code point is a letter character. | |
int | i18n_uchar_is_alnum (i18n_uchar32 c, i18n_ubool *is_alnum) |
Determines whether the specified code point is an alphanumeric character (letter or digit) according to Java. | |
int | i18n_uchar_is_xdigit (i18n_uchar32 c, i18n_ubool *is_xdigit) |
Determines whether the specified code point is a hexadecimal digit. | |
int | i18n_uchar_is_punct (i18n_uchar32 c, i18n_ubool *is_punct) |
Determines whether the specified code point is a punctuation character. | |
int | i18n_uchar_is_graph (i18n_uchar32 c, i18n_ubool *is_graph) |
Determines whether the specified code point is a "graphic" character (printable, excluding, spaces). | |
int | i18n_uchar_is_blank (i18n_uchar32 c, i18n_ubool *is_blank) |
Determines whether the specified code point is a "blank" or "horizontal space", a character that visibly separates words on a line. | |
int | i18n_uchar_is_defined (i18n_uchar32 c, i18n_ubool *is_defined) |
Determines whether the specified code point is "defined", which usually means that it is assigned a character. | |
int | i18n_uchar_is_space (i18n_uchar32 c, i18n_ubool *is_space) |
Determines if the specified character is a space character or not. | |
int | i18n_uchar_is_java_space_char (i18n_uchar32 c, i18n_ubool *is_java_space_char) |
Determines if the specified code point is a space character according to Java. | |
int | i18n_uchar_is_whitespace (i18n_uchar32 c, i18n_ubool *is_whitespace) |
Determines if the specified code point is a whitespace character according to Java/ICU. | |
int | i18n_uchar_is_control (i18n_uchar32 c, i18n_ubool *is_control) |
Determines whether the specified code point is a control character (as defined by this function). | |
int | i18n_uchar_is_iso_control (i18n_uchar32 c, i18n_ubool *is_iso_control) |
Determines whether the specified code point is an ISO control code. | |
int | i18n_uchar_is_printable (i18n_uchar32 c, i18n_ubool *is_printable) |
Determines whether the specified code point is a printable character. | |
int | i18n_uchar_is_base (i18n_uchar32 c, i18n_ubool *is_base) |
Determines whether the specified code point is a base character. | |
int | i18n_uchar_char_direction (i18n_uchar32 c, i18n_uchar_direction_e *direction) |
Returns the bidirectional category value for the code point. | |
int | i18n_uchar_is_mirrored (i18n_uchar32 c, i18n_ubool *is_mirrored) |
Determines whether the code point has the Bidi_Mirrored property. | |
int | i18n_uchar_char_mirror (i18n_uchar32 c, i18n_uchar32 *char_mirror) |
Maps the specified character to a "mirror-image" character. | |
int | i18n_uchar_get_bidi_paired_bracket (i18n_uchar32 c, i18n_uchar32 *bidi_paired_bracket) |
Maps the specified character to its paired bracket character. | |
int | i18n_uchar_char_type (i18n_uchar32 c, int8_t *char_type) |
Returns the general category value for the code point. | |
int | i18n_uchar_enum_char_types (i18n_uchar_enum_char_type_cb cb, const void *user_data) |
Enumerates efficiently all code points with their unicode general categories. | |
int | i18n_uchar_get_combining_class (i18n_uchar32 c, uint8_t *combining_class) |
Returns the combining class of the code point. | |
int | i18n_uchar_char_digit_value (i18n_uchar32 c, int32_t *char_digit_value) |
Returns the decimal digit value of a decimal digit character. | |
int | i18n_uchar_char_name (i18n_uchar32 code, i18n_uchar_u_char_name_choice_e name_choice, char *buffer, int32_t buffer_length, int32_t *name_length) |
Retrieves the name of a unicode character. | |
int | i18n_uchar_char_from_name (i18n_uchar_u_char_name_choice_e name_choice, const char *name, i18n_uchar32 *char_from_name) |
Finds a unicode character by its name and return its code point value. | |
int | i18n_uchar_enum_char_names (i18n_uchar32 start, i18n_uchar32 limit, i18n_uchar_enum_char_name_cb cb, void *user_data, i18n_uchar_u_char_name_choice_e name_choice) |
Enumerates all assigned unicode characters between the start and limit code points (start inclusive, limit exclusive) and call a function for each, passing the code point value and the character name. | |
int | i18n_uchar_get_property_name (i18n_uchar_uproperty_e property, i18n_uchar_u_property_name_choice_e name_choice, const char **name) |
Returns the unicode name for a given property, as given in the unicode database file. | |
int | i18n_uchar_get_property_enum (const char *alias, i18n_uchar_uproperty_e *property_enum) |
Returns the i18n_uchar_uproperty_e enum for a given property name, as specified in the unicode database. | |
int | i18n_uchar_get_property_value_name (i18n_uchar_uproperty_e property, int32_t value, i18n_uchar_u_property_name_choice_e name_choice, const char **name) |
Returns the unicode name for a given property value. | |
int | i18n_uchar_get_property_value_enum (i18n_uchar_uproperty_e property, const char *alias, int32_t *value_enum) |
Returns the property value integer for a given value name, as specified in the unicode database. | |
int | i18n_uchar_is_id_start (i18n_uchar32 c, i18n_ubool *is_id_start) |
Determines if the specified character is permissible as the first character in an identifier according to unicode (the unicode standard, version 3.0, chapter 5.16 identifiers). | |
int | i18n_uchar_is_id_part (i18n_uchar32 c, i18n_ubool *is_id_part) |
Determines if the specified character is permissible in an identifier according to Java. | |
int | i18n_uchar_is_id_ignorable (i18n_uchar32 c, i18n_ubool *is_id_ignorable) |
Determines if the specified character should be regarded as an ignorable character in an identifier, according to java. | |
int | i18n_uchar_is_java_id_start (i18n_uchar32 c, i18n_ubool *is_java_id_start) |
Determines if the specified character is permissible as the first character in a java identifier. | |
int | i18n_uchar_is_java_id_part (i18n_uchar32 c, i18n_ubool *is_java_id_part) |
Determines if the specified character is permissible in a java identifier. | |
int | i18n_uchar_to_lower (i18n_uchar32 c, i18n_uchar32 *lower) |
Maps the given character to its lowercase equivalent. | |
int | i18n_uchar_to_upper (i18n_uchar32 c, i18n_uchar32 *upper) |
Maps the given character to its uppercase equivalent. | |
int | i18n_uchar_to_title (i18n_uchar32 c, i18n_uchar32 *title) |
Maps the given character to its titlecase equivalent. | |
int | i18n_uchar_fold_case (i18n_uchar32 c, uint32_t options, i18n_uchar32 *code_point) |
Maps the given character to its case folding equivalent. | |
int | i18n_uchar_digit (i18n_uchar32 ch, int8_t radix, int32_t *numerical_value) |
Returns the decimal digit value of the code point in the specified radix. | |
int | i18n_uchar_for_digit (int32_t digit, int8_t radix, i18n_uchar32 *representation) |
Determines the character representation for a specific digit in the specified radix. | |
int | i18n_uchar_char_age (i18n_uchar32 c, i18n_uversion_info version_array) |
Gets the "age" of the code point. | |
int | i18n_uchar_get_unicode_version (i18n_uversion_info version_array) |
Gets the unicode version information. | |
int | i18n_uchar_get_fc_nfkc_closure (i18n_uchar32 c, i18n_uchar *dest, int32_t dest_capacity, int32_t *length) |
Gets the FC_NFKC_Closure property string for a character. | |
Typedefs | |
typedef uint16_t | i18n_uchar |
i18n_uchar. | |
typedef int32_t | i18n_uchar32 |
i18n_uchar32. | |
typedef int8_t | i18n_ubool |
i18n_ubool. | |
typedef i18n_ubool(* | i18n_uchar_enum_char_type_cb )(const void *context, i18n_uchar32 start, i18n_uchar32 limit, i18n_uchar_category_e type) |
Callback from i18n_uchar_enum_char_types(), is called for each contiguous range of code points c (where start <= c < limit ) with the same Unicode general category ("character type"). | |
typedef i18n_ubool(* | i18n_uchar_enum_char_name_cb )(void *context, i18n_uchar32 code, i18n_uchar_u_char_name_choice_e name_choice, const char *name, int32_t length) |
Type of a callback function for i18n_uchar_enum_char_name() that gets called for each Unicode character with the code point value and the character name. | |
Defines | |
#define | I18N_U_MASK(x) ((uint32_t)1 << (x)) |
#define | I18N_U_GC_CN_MASK I18N_U_MASK(I18N_UCHAR_U_GENERAL_OTHER_TYPES) |
#define | I18N_U_GC_LU_MASK I18N_U_MASK(I18N_UCHAR_U_UPPERCASE_LETTER) |
#define | I18N_U_GC_LL_MASK I18N_U_MASK(I18N_UCHAR_U_LOWERCASE_LETTER) |
#define | I18N_U_GC_LT_MASK I18N_U_MASK(I18N_UCHAR_U_TITLECASE_LETTER) |
#define | I18N_U_GC_LM_MASK I18N_U_MASK(I18N_UCHAR_U_MODIFIER_LETTER) |
#define | I18N_U_GC_LO_MASK I18N_U_MASK(I18N_UCHAR_U_OTHER_LETTER) |
#define | I18N_U_GC_MN_MASK I18N_U_MASK(I18N_UCHAR_U_NON_SPACING_MARK) |
#define | I18N_U_GC_ME_MASK I18N_U_MASK(I18N_UCHAR_U_ENCLOSING_MARK) |
#define | I18N_U_GC_MC_MASK I18N_U_MASK(I18N_UCHAR_U_COMBINING_SPACING_MARK) |
#define | I18N_U_GC_ND_MASK I18N_U_MASK(I18N_UCHAR_U_DECIMAL_DIGIT_NUMBER) |
#define | I18N_U_GC_NL_MASK I18N_U_MASK(I18N_UCHAR_U_LETTER_NUMBER) |
#define | I18N_U_GC_NO_MASK I18N_U_MASK(I18N_UCHAR_U_OTHER_NUMBER) |
#define | I18N_U_GC_ZS_MASK I18N_U_MASK(I18N_UCHAR_U_SPACE_SEPARATOR) |
#define | I18N_U_GC_ZL_MASK I18N_U_MASK(I18N_UCHAR_U_LINE_SEPARATOR) |
#define | I18N_U_GC_ZP_MASK I18N_U_MASK(I18N_UCHAR_U_PARAGRAPH_SEPARATOR) |
#define | I18N_U_GC_CC_MASK I18N_U_MASK(I18N_UCHAR_U_CONTROL_CHAR) |
#define | I18N_U_GC_CF_MASK I18N_U_MASK(I18N_UCHAR_U_FORMAT_CHAR) |
#define | I18N_U_GC_CO_MASK I18N_U_MASK(I18N_UCHAR_U_PRIVATE_USE_CHAR) |
#define | I18N_U_GC_CS_MASK I18N_U_MASK(I18N_UCHAR_U_SURROGATE) |
#define | I18N_U_GC_PD_MASK I18N_U_MASK(I18N_UCHAR_U_DASH_PUNCTUATION) |
#define | I18N_U_GC_PS_MASK I18N_U_MASK(I18N_UCHAR_U_START_PUNCTUATION) |
#define | I18N_U_GC_PE_MASK I18N_U_MASK(I18N_UCHAR_U_END_PUNCTUATION) |
#define | I18N_U_GC_PC_MASK I18N_U_MASK(I18N_UCHAR_U_CONNECTOR_PUNCTUATION) |
#define | I18N_U_GC_PO_MASK I18N_U_MASK(I18N_UCHAR_U_OTHER_PUNCTUATION) |
#define | I18N_U_GC_SM_MASK I18N_U_MASK(I18N_UCHAR_U_MATH_SYMBOL) |
#define | I18N_U_GC_SC_MASK I18N_U_MASK(I18N_UCHAR_U_CURRENCY_SYMBOL) |
#define | I18N_U_GC_SK_MASK I18N_U_MASK(I18N_UCHAR_U_MODIFIER_SYMBOL) |
#define | I18N_U_GC_SO_MASK I18N_U_MASK(I18N_UCHAR_U_OTHER_SYMBOL) |
#define | I18N_U_GC_PI_MASK I18N_U_MASK(I18N_UCHAR_U_INITIAL_PUNCTUATION) |
#define | I18N_U_GC_PF_MASK I18N_U_MASK(I18N_UCHAR_U_FINAL_PUNCTUATION) |
#define | I18N_U_GC_L_MASK (I18N_U_GC_LU_MASK|I18N_U_GC_LL_MASK|I18N_U_GC_LT_MASK|I18N_U_GC_LM_MASK|I18N_U_GC_LO_MASK) |
#define | I18N_U_GC_LC_MASK (I18N_U_GC_LU_MASK|I18N_U_GC_LL_MASK|I18N_U_GC_LT_MASK) |
#define | I18N_U_GC_M_MASK (I18N_U_GC_MN_MASK|I18N_U_GC_ME_MASK|I18N_U_GC_MC_MASK) |
#define | I18N_U_GC_N_MASK (I18N_U_GC_ND_MASK|I18N_U_GC_NL_MASK|I18N_U_GC_NO_MASK) |
#define | I18N_U_GC_Z_MASK (I18N_U_GC_ZS_MASK|I18N_U_GC_ZL_MASK|I18N_U_GC_ZP_MASK) |
#define | I18N_U_GC_C_MASK (I18N_U_GC_CN_MASK|I18N_U_GC_CC_MASK|I18N_U_GC_CF_MASK|I18N_U_GC_CO_MASK|I18N_U_GC_CS_MASK) |
#define | I18N_U_GC_P_MASK (I18N_U_GC_PD_MASK|I18N_U_GC_PS_MASK|I18N_U_GC_PE_MASK|I18N_U_GC_PC_MASK|I18N_U_GC_PO_MASK|I18N_U_GC_PI_MASK|I18N_U_GC_PF_MASK) |
#define | I18N_U_GC_S_MASK (I18N_U_GC_SM_MASK|I18N_U_GC_SC_MASK|I18N_U_GC_SK_MASK|I18N_U_GC_SO_MASK) |
#define | I18N_U_NO_NUMERIC_VALUE ((double)-123456789.) |
#define | I18N_U_GET_GC_MASK(c) I18N_U_MASK(u_charType(c)) |
#define | I18N_U_FOLD_CASE_DEFAULT 0 |
Option value for case folding: use default mappings defined in CaseFolding.txt. | |
#define | I18N_U_FOLD_CASE_EXCLUDE_SPECIAL_I 1 |
Option value for case folding: Use the modified set of mappings provided in CaseFolding.txt to handle dotted I and dotless i appropriately for Turkic languages (tr, az). Before Unicode 3.2, CaseFolding.txt contains mappings marked with 'I' that are to be included for default mappings and excluded for the Turkic-specific mappings. Unicode 3.2 CaseFolding.txt instead contains mappings marked with 'T' that are to be excluded for default mappings and included for the Turkic-specific mappings. | |
#define | I18N_USEARCH_DONE -1 |
DONE is returned by i18n_usearch_previous() and i18n_usearch_next() after all valid matches have been returned, and by, i18n_usearch_first() and i18n_usearch_last() if there are no matches at all. |
Define Documentation
#define I18N_U_FOLD_CASE_DEFAULT 0 |
Option value for case folding: use default mappings defined in CaseFolding.txt.
- Since :
- 2.3.1
#define I18N_U_FOLD_CASE_EXCLUDE_SPECIAL_I 1 |
Option value for case folding:
Use the modified set of mappings provided in CaseFolding.txt to handle dotted I and dotless i appropriately for Turkic languages (tr, az).
Before Unicode 3.2, CaseFolding.txt contains mappings marked with 'I' that are to be included for default mappings and excluded for the Turkic-specific mappings.
Unicode 3.2 CaseFolding.txt instead contains mappings marked with 'T' that are to be excluded for default mappings and included for the Turkic-specific mappings.
- Since :
- 2.3.1
#define I18N_U_GC_C_MASK (I18N_U_GC_CN_MASK|I18N_U_GC_CC_MASK|I18N_U_GC_CF_MASK|I18N_U_GC_CO_MASK|I18N_U_GC_CS_MASK) |
Mask constant for multiple i18n_uchar_category_e bits (C Others).
- Since :
- 2.3.1
Mask constant for a i18n_uchar_category_e.
- Since :
- 2.3.1
Mask constant for a i18n_uchar_category_e.
- Since :
- 2.3.1
U_GC_XX_MASK constants are bit flags corresponding to Unicode general category values.
- Since :
- 2.3.1
Mask constant for a i18n_uchar_category_e.
- Since :
- 2.3.1
Mask constant for a i18n_uchar_category_e.
- Since :
- 2.3.1
#define I18N_U_GC_L_MASK (I18N_U_GC_LU_MASK|I18N_U_GC_LL_MASK|I18N_U_GC_LT_MASK|I18N_U_GC_LM_MASK|I18N_U_GC_LO_MASK) |
Mask constant for multiple i18n_uchar_category_e bits (L Letters).
- Since :
- 2.3.1
Mask constant for multiple i18n_uchar_category_e bits (LC Cased Letters).
- Since :
- 2.3.1
Mask constant for a i18n_uchar_category_e.
- Since :
- 2.3.1
Mask constant for a i18n_uchar_category_e.
- Since :
- 2.3.1
Mask constant for a i18n_uchar_category_e.
- Since :
- 2.3.1
Mask constant for a i18n_uchar_category_e.
- Since :
- 2.3.1
Mask constant for a i18n_uchar_category_e.
- Since :
- 2.3.1
Mask constant for multiple i18n_uchar_category_e bits (M Marks).
- Since :
- 2.3.1
Mask constant for a i18n_uchar_category_e.
- Since :
- 2.3.1
Mask constant for a i18n_uchar_category_e.
- Since :
- 2.3.1
Mask constant for a i18n_uchar_category_e.
- Since :
- 2.3.1
Mask constant for multiple i18n_uchar_category_e bits (N Numbers).
- Since :
- 2.3.1
Mask constant for a i18n_uchar_category_e.
- Since :
- 2.3.1
Mask constant for a i18n_uchar_category_e.
- Since :
- 2.3.1
Mask constant for a i18n_uchar_category_e.
- Since :
- 2.3.1
#define I18N_U_GC_P_MASK (I18N_U_GC_PD_MASK|I18N_U_GC_PS_MASK|I18N_U_GC_PE_MASK|I18N_U_GC_PC_MASK|I18N_U_GC_PO_MASK|I18N_U_GC_PI_MASK|I18N_U_GC_PF_MASK) |
Mask constant for multiple i18n_uchar_category_e bits (P Punctuation).
- Since :
- 2.3.1
Mask constant for a i18n_uchar_category_e.
- Since :
- 2.3.1
Mask constant for a i18n_uchar_category_e.
- Since :
- 2.3.1
Mask constant for a i18n_uchar_category_e.
- Since :
- 2.3.1
Mask constant for a i18n_uchar_category_e.
- Since :
- 2.3.1
Mask constant for a i18n_uchar_category_e.
- Since :
- 2.3.1
Mask constant for a i18n_uchar_category_e.
- Since :
- 2.3.1
Mask constant for a i18n_uchar_category_e.
- Since :
- 2.3.1
Mask constant for multiple i18n_uchar_category_e bits (S Symbols).
- Since :
- 2.3.1
Mask constant for a i18n_uchar_category_e.
- Since :
- 2.3.1
Mask constant for a i18n_uchar_category_e.
- Since :
- 2.3.1
Mask constant for a i18n_uchar_category_e.
- Since :
- 2.3.1
Mask constant for a i18n_uchar_category_e.
- Since :
- 2.3.1
Mask constant for multiple i18n_uchar_category_e bits (Z Separators).
- Since :
- 2.3.1
Mask constant for a i18n_uchar_category_e.
- Since :
- 2.3.1
Mask constant for a i18n_uchar_category_e.
- Since :
- 2.3.1
Mask constant for a i18n_uchar_category_e.
- Since :
- 2.3.1
#define I18N_U_GET_GC_MASK | ( | c | ) | I18N_U_MASK(u_charType(c)) |
Get a single-bit bit set for the general category of a character.
- Since :
- 2.3.1
#define I18N_U_MASK | ( | x | ) | ((uint32_t)1 << (x)) |
Get a single-bit bit set (a flag) from a bit number 0..31.
- Since :
- 2.3.1
#define I18N_U_NO_NUMERIC_VALUE ((double)-123456789.) |
Special value that is returned by i18n_uchar_get_numeric_value() when no numeric value is defined for a code point.
- Since :
- 2.3.1
#define I18N_USEARCH_DONE -1 |
DONE is returned by i18n_usearch_previous() and i18n_usearch_next() after all valid matches have been returned, and by, i18n_usearch_first() and i18n_usearch_last() if there are no matches at all.
- Since :
- 2.3.1
Typedef Documentation
typedef int8_t i18n_ubool |
i18n_ubool.
- Since :
- 2.3.1
typedef uint16_t i18n_uchar |
i18n_uchar.
- Since :
- 2.3.1 (U_ICU_VERSION_MAJOR_NUM >= 59)
typedef int32_t i18n_uchar32 |
i18n_uchar32.
- Since :
- 2.3.1
typedef i18n_ubool(* i18n_uchar_enum_char_name_cb)(void *context, i18n_uchar32 code, i18n_uchar_u_char_name_choice_e name_choice, const char *name, int32_t length) |
Type of a callback function for i18n_uchar_enum_char_name() that gets called for each Unicode character with the code point value and the character name.
The callback function can stop the enumeration by returning false
.
- Since :
- 4.0
- Parameters:
-
[in] context The context pointer that was passed to i18n_uchar_enum_char_names() [in] code The Unicode code point for the character with this name [in] name_choice Selector for which kind of names is enumerated [in] name The character's name, zero-terminated. Can be used only in the callback. To use outside, make a copy. [in] length The length of the name
- Returns:
true
if the enumeration should continue,false
to stop it
typedef i18n_ubool(* i18n_uchar_enum_char_type_cb)(const void *context, i18n_uchar32 start, i18n_uchar32 limit, i18n_uchar_category_e type) |
Callback from i18n_uchar_enum_char_types(), is called for each contiguous range of code points c (where start <= c < limit
) with the same Unicode general category ("character type").
The callback function can stop the enumeration by returning false
.
- Since :
- 4.0
- Parameters:
-
[in] context The context pointer that was passed to i18n_uchar_enum_char_types() [in] start The first code point in a contiguous range with value [in] limit One past the last code point in a contiguous range with value [in] type The general category for all code points in [start..limit]
- Returns:
true
if the enumeration should continue,false
to stop it
Enumeration Type Documentation
Enumeration for Unicode general category types.
- Since :
- 2.3.1
- Enumerator:
I18N_UCHAR_U_UNASSIGNED Non-category for unassigned and non-character code points
I18N_UCHAR_U_GENERAL_OTHER_TYPES Cn "Other, Not Assigned (no characters in [UnicodeData.txt] have this property)" (same as I18N_UCHAR_U_UNASSIGNED!)
I18N_UCHAR_U_UPPERCASE_LETTER Lu
I18N_UCHAR_U_LOWERCASE_LETTER Ll
I18N_UCHAR_U_TITLECASE_LETTER Lt
I18N_UCHAR_U_MODIFIER_LETTER Lm
I18N_UCHAR_U_OTHER_LETTER Lo
I18N_UCHAR_U_NON_SPACING_MARK Mn
I18N_UCHAR_U_ENCLOSING_MARK Me
I18N_UCHAR_U_COMBINING_SPACING_MARK Mc
I18N_UCHAR_U_DECIMAL_DIGIT_NUMBER Nd
I18N_UCHAR_U_LETTER_NUMBER Nl
I18N_UCHAR_U_OTHER_NUMBER No
I18N_UCHAR_U_SPACE_SEPARATOR Zs
I18N_UCHAR_U_LINE_SEPARATOR Zl
I18N_UCHAR_U_PARAGRAPH_SEPARATOR Zp
I18N_UCHAR_U_CONTROL_CHAR Cc
I18N_UCHAR_U_FORMAT_CHAR Cf
I18N_UCHAR_U_PRIVATE_USE_CHAR Co
I18N_UCHAR_U_SURROGATE Cs
I18N_UCHAR_U_DASH_PUNCTUATION Pd
I18N_UCHAR_U_START_PUNCTUATION Ps
I18N_UCHAR_U_END_PUNCTUATION Pe
I18N_UCHAR_U_CONNECTOR_PUNCTUATION Pc
I18N_UCHAR_U_OTHER_PUNCTUATION Po
I18N_UCHAR_U_MATH_SYMBOL Sm
I18N_UCHAR_U_CURRENCY_SYMBOL Sc
I18N_UCHAR_U_MODIFIER_SYMBOL Sk
I18N_UCHAR_U_OTHER_SYMBOL So
I18N_UCHAR_U_INITIAL_PUNCTUATION Pi
I18N_UCHAR_U_FINAL_PUNCTUATION Pf
I18N_UCHAR_U_CHAR_CATEGORY_COUNT One higher than the last enum i18n_uchar_category_e constant
Enumeration for the language directional property of a character set.
- Since :
- 2.3.1
- Enumerator:
Enumeration for i18n_uchar_char_name() constants.
- Since :
- 4.0
Enumeration for Decomposition Type constants.
- Since :
- 2.3.1
- Enumerator:
Enumeration for Grapheme Cluster Break constants.
- Since :
- 2.3.1
- Enumerator:
Enumeration for Hangul Syllable Type constants.
- Since :
- 2.3.1
Enumeration for Joining Group constants.
- Since :
- 2.3.1
- Enumerator:
Enumeration for Line Break constants.
- Since :
- 2.3.1
- Enumerator:
Enumeration for i18n_uchar_get_property_name() and i18n_uchar_get_property_value_name() constants.
- Since :
- 4.0
Enumeration for Sentence Break constants.
- Since :
- 2.3.1
- Enumerator:
Enumeration for Word Break constants.
- Since :
- 2.3.1
- Enumerator:
Constants for Unicode blocks, see the Unicode Data file Blocks.txt.
- Since :
- 2.3.1
- Enumerator:
Enumeration of constants for Unicode properties. The properties APIs are intended to reflect Unicode properties as defined in the Unicode Character Database (UCD) and Unicode Technical Reports (UTR). For details about the properties see http://www.unicode.org/ucd/ . For names of Unicode properties see the UCD file PropertyAliases.txt.
- Since :
- 2.3.1
- Enumerator:
I18N_UCHAR_ALPHABETIC Binary property Alphabetic.
Lu+Ll+Lt+Lm+Lo+Nl+Other_AlphabeticI18N_UCHAR_BINARY_START First constant for binary Unicode properties.
I18N_UCHAR_ASCII_HEX_DIGIT Binary property ASCII_Hex_Digit.
0-9 A-F a-fI18N_UCHAR_BIDI_CONTROL Binary property Bidi_Control.
Format controls which have specific functions in the Bidi Algorithm.I18N_UCHAR_BIDI_MIRRORED Binary property Bidi_Mirrored.
Characters that may change display in RTL text. See Bidi Algorithm, UTR 9.I18N_UCHAR_DASH Binary property Dash.
Variations of dashes.I18N_UCHAR_DEFAULT_IGNORABLE_CODE_POINT Binary property Default_Ignorable_Code_Point (new in Unicode 3.2).
Ignorable in most processing. <2060..206F, FFF0..FFFB, E0000..E0FFF>+Other_Default_Ignorable_Code_Point+(Cf+Cc+Cs-White_Space)I18N_UCHAR_DEPRECATED Binary property Deprecated (new in Unicode 3.2).
The usage of deprecated characters is strongly discouraged.I18N_UCHAR_DIACRITIC Binary property Diacritic.
Characters that linguistically modify the meaning of another character to which they apply.I18N_UCHAR_EXTENDER Binary property Extender.
Extend the value or shape of a preceding alphabetic character, e.g. length and iteration marks.I18N_UCHAR_FULL_COMPOSITION_EXCLUSION Binary property Full_Composition_Exclusion.
CompositionExclusions.txt+Singleton Decompositions+ Non-Starter Decompositions.I18N_UCHAR_GRAPHEME_BASE Binary property Grapheme_Base (new in Unicode 3.2).
For programmatic determination of grapheme cluster boundaries. [0..10FFFF]-Cc-Cf-Cs-Co-Cn-Zl-Zp-Grapheme_Link-Grapheme_Extend-CGJI18N_UCHAR_GRAPHEME_EXTEND Binary property Grapheme_Extend (new in Unicode 3.2).
For programmatic determination of grapheme cluster boundaries. Me+Mn+Mc+Other_Grapheme_Extend-Grapheme_Link-CGJI18N_UCHAR_GRAPHEME_LINK Binary property Grapheme_Link (new in Unicode 3.2).
For programmatic determination of grapheme cluster boundaries.I18N_UCHAR_HEX_DIGIT Binary property Hex_Digit.
Characters commonly used for hexadecimal numbers.I18N_UCHAR_HYPHEN Binary property Hyphen.
Dashes used to mark connections between pieces of words, plus the Katakana middle dot.I18N_UCHAR_ID_CONTINUE Binary property ID_Continue.
Characters that can continue an identifier. DerivedCoreProperties.txt also says "NOTE: Cf characters should be filtered out." ID_Start+Mn+Mc+Nd+PcI18N_UCHAR_ID_START Binary property ID_Start.
Characters that can start an identifier. Lu+Ll+Lt+Lm+Lo+NlI18N_UCHAR_IDEOGRAPHIC Binary property Ideographic.
CJKV ideographs.I18N_UCHAR_IDS_BINARY_OPERATOR Binary property IDS_Binary_Operator (new in Unicode 3.2).
For programmatic determination of Ideographic Description Sequences.I18N_UCHAR_IDS_TRINARY_OPERATOR Binary property IDS_Trinary_Operator (new in Unicode 3.2).
For programmatic determination of Ideographic Description Sequences.I18N_UCHAR_JOIN_CONTROL Binary property Join_Control.
Format controls for cursive joining and ligation.I18N_UCHAR_LOGICAL_ORDER_EXCEPTION Binary property Logical_Order_Exception (new in Unicode 3.2).
Characters that do not use logical order and require special handling in most processing.I18N_UCHAR_LOWERCASE Binary property Lowercase.
Ll+Other_LowercaseI18N_UCHAR_MATH Binary property Math.
Sm+Other_MathI18N_UCHAR_NONCHARACTER_CODE_POINT Binary property Noncharacter_Code_Point.
Code points that are explicitly defined as illegal for the encoding of characters.I18N_UCHAR_QUOTATION_MARK Binary property Quotation_Mark.
I18N_UCHAR_RADICAL Binary property Radical (new in Unicode 3.2).
For programmatic determination of Ideographic Description Sequences.I18N_UCHAR_SOFT_DOTTED Binary property Soft_Dotted (new in Unicode 3.2).
Characters with a "soft dot", like i or j. An accent placed on these characters causes the dot to disappear.I18N_UCHAR_TERMINAL_PUNCTUATION Binary property Terminal_Punctuation.
Punctuation characters that generally mark the end of textual units.I18N_UCHAR_UNIFIED_IDEOGRAPH Binary property Unified_Ideograph (new in Unicode 3.2).
For programmatic determination of Ideographic Description Sequences.I18N_UCHAR_UPPERCASE Binary property Uppercase.
Lu+Other_UppercaseI18N_UCHAR_WHITE_SPACE Binary property White_Space.
Space characters+TAB+CR+LF-ZWSP-ZWNBSPI18N_UCHAR_XID_CONTINUE Binary property XID_Continue.
ID_Continue modified to allow closure under normalization forms NFKC and NFKD.I18N_UCHAR_XID_START Binary property XID_Start.
ID_Start modified to allow closure under normalization forms NFKC and NFKD.I18N_UCHAR_CASE_SENSITIVE Binary property Case_Sensitive.
Either the source of a case mapping or in the target of a case mapping. Not the same as the general category Cased_Letter.I18N_UCHAR_S_TERM Binary property STerm (new in Unicode 4.0.1).
I18N_UCHAR_VARIATION_SELECTOR Binary property Variation_Selector (new in Unicode 4.0.1).
Indicates all those characters that qualify as Variation Selectors.I18N_UCHAR_NFD_INERT Binary property NFD_Inert.
ICU-specific property for characters that are inert under NFD, i.e., they do not interact with adjacent characters.I18N_UCHAR_NFKD_INERT Binary property NFKD_Inert.
ICU-specific property for characters that are inert under NFKD, i.e., they do not interact with adjacent characters.I18N_UCHAR_NFC_INERT Binary property NFC_Inert.
ICU-specific property for characters that are inert under NFC, i.e., they do not interact with adjacent characters.I18N_UCHAR_NFKC_INERT Binary property NFKC_Inert.
ICU-specific property for characters that are inert under NFKC, i.e., they do not interact with adjacent characters.I18N_UCHAR_SEGMENT_STARTER Binary Property Segment_Starter.
Property for characters that are starters in terms of Unicode normalization and combining character sequences. They have ccc=0 and do not occur in non-initial position of the canonical decomposition of any character (like a-umlaut in NFD and a Jamo T in an NFD(Hangul LVT)).I18N_UCHAR_PATTERN_SYNTAX Binary property Pattern_Syntax (new in Unicode 4.1).
I18N_UCHAR_PATTERN_WHITE_SPACE Binary property Pattern_White_Space (new in Unicode 4.1).
I18N_UCHAR_POSIX_ALNUM Binary property alnum (a C/POSIX character class).
I18N_UCHAR_POSIX_BLANK Binary property blank (a C/POSIX character class).
I18N_UCHAR_POSIX_GRAPH Binary property graph (a C/POSIX character class).
I18N_UCHAR_POSIX_PRINT Binary property print (a C/POSIX character class).
I18N_UCHAR_POSIX_XDIGIT Binary property xdigit (a C/POSIX character class).
I18N_UCHAR_CASED Binary property Cased.
For Lowercase, Uppercase and Titlecase characters.I18N_UCHAR_CASE_IGNORABLE Binary property Case_Ignorable.
Used in context-sensitive case mappings.I18N_UCHAR_CHANGES_WHEN_LOWERCASED Binary property Changes_When_Lowercased.
I18N_UCHAR_CHANGES_WHEN_UPPERCASED Binary property Changes_When_Uppercased.
I18N_UCHAR_CHANGES_WHEN_TITLECASED Binary property Changes_When_Titlecased.
I18N_UCHAR_CHANGES_WHEN_CASEFOLDED Binary property Changes_When_Casefolded.
I18N_UCHAR_CHANGES_WHEN_CASEMAPPED Binary property Changes_When_Casemapped.
I18N_UCHAR_CHANGES_WHEN_NFKC_CASEFOLDED Binary property Changes_When_NFKC_Casefolded.
I18N_UCHAR_EMOJI Binary property Emoji (Since 4.0).
I18N_UCHAR_EMOJI_PRESENTATION Binary property Emoji Presentation (Since 4.0).
I18N_UCHAR_EMOJI_MODIFIER Binary property Emoji Modifier (Since 4.0).
I18N_UCHAR_EMOJI_MODIFIER_BASE Binary property Emoji Modifier Base (Since 4.0).
I18N_UCHAR_BINARY_LIMIT One more than the last constant for binary Unicode properties.
I18N_UCHAR_BIDI_CLASS Enumerated property Bidi_Class.
Same as u_charDirection, returns i18n_uchar_direction_e values.I18N_UCHAR_INT_START First constant for enumerated/integer Unicode properties.
I18N_UCHAR_BLOCK Enumerated property Block.
Returns i18n_uchar_ublock_code_e values.I18N_UCHAR_CANONICAL_COMBINING_CLASS Enumerated property Canonical_Combining_Class.
Returns 8-bit numeric values.I18N_UCHAR_DECOMPOSITION_TYPE Enumerated property Decomposition_Type.
Returns i18n_uchar_u_decomposition_type_e values.I18N_UCHAR_EAST_ASIAN_WIDTH Enumerated property East_Asian_Width.
Returns i18n_uchar_u_east_asian_width_e values.I18N_UCHAR_GENERAL_CATEGORY Enumerated property General_Category.
Returns i18n_uchar_category_e values.I18N_UCHAR_JOINING_GROUP Enumerated property Joining_Group.
Returns i18n_uchar_u_joining_group_e values.I18N_UCHAR_JOINING_TYPE Enumerated property Joining_Type.
Returns i18n_uchar_u_joining_type_e values.I18N_UCHAR_LINE_BREAK Enumerated property Line_Break.
Returns i18n_uchar_u_line_break_e values.I18N_UCHAR_NUMERIC_TYPE Enumerated property Numeric_Type.
Returns i18n_uchar_u_numeric_type_e values.I18N_UCHAR_SCRIPT Enumerated property Script.
Returns i18n_uscript_code_e values.I18N_UCHAR_HANGUL_SYLLABLE_TYPE Enumerated property Hangul_Syllable_Type, new in Unicode 4.
Returns i18n_uchar_u_hangul_syllable_type_e values.I18N_UCHAR_NFD_QUICK_CHECK Enumerated property NFD_Quick_Check.
Returns i18n_unormalization_check_result_e values.I18N_UCHAR_NFKD_QUICK_CHECK Enumerated property NFKD_Quick_Check.
Returns i18n_unormalization_check_result_e values.I18N_UCHAR_NFC_QUICK_CHECK Enumerated property NFC_Quick_Check.
Returns i18n_unormalization_check_result_e values.I18N_UCHAR_NFKC_QUICK_CHECK Enumerated property NFKC_Quick_Check.
Returns i18n_unormalization_check_result_e values.I18N_UCHAR_LEAD_CANONICAL_COMBINING_CLASS Enumerated property Lead_Canonical_Combining_Class.
Returns 8-bit numeric values.I18N_UCHAR_TRAIL_CANONICAL_COMBINING_CLASS Enumerated property Trail_Canonical_Combining_Class.
Returns 8-bit numeric values.I18N_UCHAR_GRAPHEME_CLUSTER_BREAK Enumerated property Grapheme_Cluster_Break (new in Unicode 4.1).
Returns i18n_uchar_u_grapheme_cluster_break_e values.I18N_UCHAR_SENTENCE_BREAK Enumerated property Sentence_Break (new in Unicode 4.1).
Returns i18n_uchar_u_sentence_break_e values.I18N_UCHAR_WORD_BREAK Enumerated property Word_Break (new in Unicode 4.1).
Returns i18n_uchar_u_word_break_values_e values.I18N_UCHAR_BIDI_PAIRED_BRACKET_TYPE Enumerated property Bidi_Paired_Bracket_Type.
Returns i18n_uchar_u_bidi_paired_bracket_type_e values .I18N_UCHAR_INT_LIMIT One more than the last constant for enumerated/integer Unicode properties.
I18N_UCHAR_GENERAL_CATEGORY_MASK Bitmask property General_Category_Mask.
Mask values should be cast to uint32_t.I18N_UCHAR_MASK_START First constant for bit-mask Unicode properties.
I18N_UCHAR_MASK_LIMIT One more than the last constant for bit-mask Unicode properties.
I18N_UCHAR_NUMERIC_VALUE Double property Numeric_Value.
I18N_UCHAR_DOUBLE_START First constant for double Unicode properties.
I18N_UCHAR_DOUBLE_LIMIT One more than the last constant for double Unicode properties.
I18N_UCHAR_AGE String property Age.
I18N_UCHAR_STRING_START First constant for string Unicode properties.
I18N_UCHAR_BIDI_MIRRORING_GLYPH String property Bidi_Mirroring_Glyph.
I18N_UCHAR_CASE_FOLDING String property Case_Folding.
I18N_UCHAR_LOWERCASE_MAPPING String property Lowercase_Mapping.
I18N_UCHAR_NAME String property Name.
I18N_UCHAR_SIMPLE_CASE_FOLDING String property Simple_Case_Folding.
I18N_UCHAR_SIMPLE_LOWERCASE_MAPPING String property Simple_Lowercase_Mapping.
I18N_UCHAR_SIMPLE_TITLECASE_MAPPING String property Simple_Titlecase_Mapping.
I18N_UCHAR_SIMPLE_UPPERCASE_MAPPING String property Simple_Uppercase_Mapping.
I18N_UCHAR_TITLECASE_MAPPING String property Titlecase_Mapping.
I18N_UCHAR_UPPERCASE_MAPPING String property Uppercase_Mapping.
I18N_UCHAR_BIDI_PAIRED_BRACKET String property Bidi_Paired_Bracket.
I18N_UCHAR_STRING_LIMIT One more than the last constant for string Unicode properties.
I18N_UCHAR_SCRIPT_EXTENSIONS Provisional property Script_Extensions (new in Unicode 6.0).
I18N_UCHAR_OTHER_PROPERTY_START First constant for Unicode properties with unusual value types.
I18N_UCHAR_OTHER_PROPERTY_LIMIT One more than the last constant for Unicode properties with unusual value types.
I18N_UCHAR_INVALID_CODE Represents a nonexistent or invalid property or property value.
Function Documentation
int i18n_uchar_char_age | ( | i18n_uchar32 | c, |
i18n_uversion_info | version_array | ||
) |
Gets the "age" of the code point.
The "age" is the Unicode version when the code point was first designated (as a non-character or for private use) or assigned a character. This can be useful to avoid emitting code points to receiving processes that do not accept newer characters.
- Since :
- 4.0
- Parameters:
-
[in] c The code point [in] version_array The Unicode version number array, to be filled in
- Returns:
0
on success, otherwise a negative error value
- Return values:
-
I18N_ERROR_NONE Successful I18N_ERROR_INVALID_PARAMETER Invalid function parameter
int i18n_uchar_char_digit_value | ( | i18n_uchar32 | c, |
int32_t * | char_digit_value | ||
) |
Returns the decimal digit value of a decimal digit character.
Such characters have the general category "Nd" (decimal digit numbers) and a i18n_uchar_u_numeric_type_e of I18N_UCHAR_U_NT_DECIMAL. Unlike ICU releases before 2.6, no digit values are returned for any Han characters because Han number characters are often used with a special chinese-style number format (with characters for powers of 10 in between) instead of in decimal-positional notation. Unicode 4 explicitly assigns Han number characters the i18n_uchar_u_numeric_type_e I18N_UCHAR_U_NT_NUMERIC instead of I18N_UCHAR_U_NT_DECIMAL. See jitterbug 1483 for more details. Use i18n_uchar_get_int_property_value() and i18n_uchar_get_numeric_value() for complete numeric unicode properties.
- Since :
- 4.0
- Parameters:
-
[in] c The code point for which to get the decimal digit value [out] char_digit_value The decimal digit value of c, or -1
if c is not a decimal digit character
- Returns:
0
on success, otherwise a negative error value
- Return values:
-
I18N_ERROR_NONE Successful I18N_ERROR_INVALID_PARAMETER Invalid function parameter
- See also:
- i18n_uchar_get_numeric_value()
int i18n_uchar_char_direction | ( | i18n_uchar32 | c, |
i18n_uchar_direction_e * | direction | ||
) |
Returns the bidirectional category value for the code point.
Which is used in the unicode bidirectional algorithm (UAX #9 Unicode reports). Note that some unassigned code points have bidi values of R or AL because they are in blocks that are reserved for right-to-left scripts. Same as java.lang.Character.getDirectionality()
- Since :
- 4.0
- Parameters:
-
[in] c The code point to be tested [out] direction The bidirectional category (i18n_uchar_direction_e) value
- Returns:
0
on success, otherwise a negative error value
- Return values:
-
I18N_ERROR_NONE Successful I18N_ERROR_INVALID_PARAMETER Invalid function parameter
- See also:
- i18n_uchar_direction_e
int i18n_uchar_char_from_name | ( | i18n_uchar_u_char_name_choice_e | name_choice, |
const char * | name, | ||
i18n_uchar32 * | char_from_name | ||
) |
Finds a unicode character by its name and return its code point value.
The name is matched exactly and completely. If the name does not correspond to a code point, I18N_ERROR_INVALID_CHAR_FOUND is returned. A unicode 1.0 name is matched only if it differs from the modern name. Unicode names are all uppercase. Extended names are lowercase followed by an uppercase hexadecimal number, and within angle brackets.
- Since :
- 4.0
- Parameters:
-
[in] name_choice Selector for which name to match [in] name The name to match [out] char_from_name The Unicode value of the code point with the given name, or an undefined value if there is no such code point
- Returns:
0
on success, otherwise a negative error value
- Return values:
-
I18N_ERROR_NONE Successful I18N_ERROR_INVALID_PARAMETER Invalid function parameter
int i18n_uchar_char_mirror | ( | i18n_uchar32 | c, |
i18n_uchar32 * | char_mirror | ||
) |
Maps the specified character to a "mirror-image" character.
For characters with the bidi_mirrored property, implementations sometimes need a "poor man's" mapping to another unicode character (code point) such that the default glyph may serve as the mirror-image of the default glyph of the specified character. This is useful for text conversion to and from codepages with visual order, and for displays without glyph selection capabilities.
- Since :
- 4.0
- Parameters:
-
[in] c The code point to be mapped [out] char_mirror Another Unicode code point that may serve as a mirror-image substitute, or c itself if there is no such mapping or c does not have the Bidi_Mirrored property
- Returns:
0
on success, otherwise a negative error value
- Return values:
-
I18N_ERROR_NONE Successful I18N_ERROR_INVALID_PARAMETER Invalid function parameter
int i18n_uchar_char_name | ( | i18n_uchar32 | code, |
i18n_uchar_u_char_name_choice_e | name_choice, | ||
char * | buffer, | ||
int32_t | buffer_length, | ||
int32_t * | name_length | ||
) |
Retrieves the name of a unicode character.
Depending on name_choice, the character name written into the buffer is the "modern" name or the name that was defined in unicode version 1.0. The name contains only "invariant" characters like a-z, 0-9, space, and '-'. unicode 1.0 names are only retrieved if they are different from the modern names and if the data file contains the data for them.
- Since :
- 4.0
- Parameters:
-
[in] code The character (code point) for which to get the name. It must be 0 <= code <= 0x10ffff
.[in] name_choice Selector for which name to get. [in] buffer Destination buffer for copying the name. The name will always be zero-terminated. If there is no name, then the buffer will be set to the empty string. [in] buffer_length The length of the buffer [out] name_length The length of the name, or 0 if there is no name for this character. If the bufferLength is less than or equal to the length, then the buffer contains the truncated name and the returned length indicates the full length of the name. The length does not include the zero-termination.
- Returns:
0
on success, otherwise a negative error value
- Return values:
-
I18N_ERROR_NONE Successful I18N_ERROR_INVALID_PARAMETER Invalid function parameter
int i18n_uchar_char_type | ( | i18n_uchar32 | c, |
int8_t * | char_type | ||
) |
Returns the general category value for the code point.
Same as java.lang.character.getType().
- Since :
- 4.0
- Parameters:
-
[in] c The code point to be tested [out] char_type The general category (i18n_uchar_category_e) value
- Returns:
0
on success, otherwise a negative error value
- Return values:
-
I18N_ERROR_NONE Successful I18N_ERROR_INVALID_PARAMETER Invalid function parameter
- See also:
- i18n_uchar_category_e
int i18n_uchar_digit | ( | i18n_uchar32 | ch, |
int8_t | radix, | ||
int32_t * | numerical_value | ||
) |
Returns the decimal digit value of the code point in the specified radix.
If the radix is not in the range
or if the value of c is not a valid digit in the specified radix, 2<=
radix <= 36
-1
is returned. A character is a valid digit if at least one of the following is true:
The character has a decimal digit value. Such characters have the general category "Nd" (decimal digit numbers) and a I18N_UCHAR_NUMERIC_TYPE of I18N_UCHAR_U_NT_DECIMAL. In this case the value is the character's decimal digit value.
The character is one of the uppercase Latin letters 'A'
through 'Z'
. In this case the value is c -
.'A'
+ 10
The character is one of the lowercase Latin letters 'a'
through 'z'
. In this case the value is ch -
.'a'
+ 10
Latin letters from both the ASCII range (0061..007A, 0041..005A) as well as from the Fullwidth ASCII range (FF41..FF5A, FF21..FF3A) are recognized.
Same as java.lang.Character.digit().
- Since :
- 4.0
- Parameters:
-
[in] ch The code point to be tested [in] radix The radix [out] numerical_value The numeric value represented by the character in the specified radix, or -1
if there is no value or if the value exceeds the radix
- Returns:
0
on success, otherwise a negative error value
- Return values:
-
I18N_ERROR_NONE Successful I18N_ERROR_INVALID_PARAMETER Invalid function parameter
int i18n_uchar_enum_char_names | ( | i18n_uchar32 | start, |
i18n_uchar32 | limit, | ||
i18n_uchar_enum_char_name_cb | cb, | ||
void * | user_data, | ||
i18n_uchar_u_char_name_choice_e | name_choice | ||
) |
Enumerates all assigned unicode characters between the start and limit code points (start inclusive, limit exclusive) and call a function for each, passing the code point value and the character name.
For unicode 1.0 names, only those are enumerated that differ from the modern names.
- Since :
- 4.0
- Parameters:
-
[in] start The first code point in the enumeration range [in] limit One more than the last code point in the enumeration range (the first one after the range) [in] cb The function that is to be called for each character name [in] user_data An arbitrary pointer that is passed to the function [in] name_choice Selector for which kind of names to enumerate
- Returns:
0
on success, otherwise a negative error value
- Return values:
-
I18N_ERROR_NONE Successful I18N_ERROR_INVALID_PARAMETER Invalid function parameter
int i18n_uchar_enum_char_types | ( | i18n_uchar_enum_char_type_cb | cb, |
const void * | user_data | ||
) |
Enumerates efficiently all code points with their unicode general categories.
This is useful for building data structures (e.g., unicode_set's), for enumerating all assigned code points ( type != I18N_UCHAR_U_UNASSIGNED
), etc.for each contiguous range of code points with a given general category ("character type"), the i18n_uchar_enum_char_type_cb() function is called. Adjacent ranges have different types. The unicode standard guarantees that the numeric value of the type is 0..31.
- Since :
- 4.0
- Parameters:
-
[in] cb A pointer to a function that is called for each contiguous range of code points with the same general category [in] user_data An opaque pointer that is passed on to the callback function
- Returns:
0
on success, otherwise a negative error value
- Return values:
-
I18N_ERROR_NONE Successful I18N_ERROR_INVALID_PARAMETER Invalid function parameter
int i18n_uchar_fold_case | ( | i18n_uchar32 | c, |
uint32_t | options, | ||
i18n_uchar32 * | code_point | ||
) |
Maps the given character to its case folding equivalent.
If the character has no case folding equivalent, the character itself is returned. This function only returns the simple, single-code point case mapping. Full case mappings should be used whenever possible because they produce better results by working on whole strings. They take into account the string context and the language and can map to a result string with a different length as appropriate. Full case mappings are applied by the string case mapping functions, see utils_i18n_ustring.h. See also the user guide chapter on c/posix migration: User Guide: Case Mappings
- Since :
- 4.0
- Parameters:
-
[in] c The code point to be mapped [in] options Either I18N_U_FOLD_CASE_DEFAULT or I18N_U_FOLD_CASE_EXCLUDE_SPECIAL_I [out] code_point The I18N_UCHAR_SIMPLE_CASE_FOLDING of the code point, if any; otherwise the code point itself.
- Returns:
0
on success, otherwise a negative error value
- Return values:
-
I18N_ERROR_NONE Successful I18N_ERROR_INVALID_PARAMETER Invalid function parameter
int i18n_uchar_for_digit | ( | int32_t | digit, |
int8_t | radix, | ||
i18n_uchar32 * | representation | ||
) |
Determines the character representation for a specific digit in the specified radix.
If the value of radix is not a valid radix, or the value of digit is not a valid digit in the specified radix, the null character (u+0000
) is returned. The radix argument is valid if it is greater than or equal to 2
and less than or equal to 36
. The digit argument is valid if
. If the digit is less than 0
<= digit < radix10
, then
is returned. Otherwise, the value '0'
+ digit
is returned. Same as java.lang.Character.forDigit(). 'a'
+ digit - 10
- Since :
- 4.0
- Parameters:
-
[in] digit The number to convert to a character [in] radix The radix [out] representation The char representation of the specified digit in the specified radix
- Returns:
0
on success, otherwise a negative error value
- Return values:
-
I18N_ERROR_NONE Successful I18N_ERROR_INVALID_PARAMETER Invalid function parameter
int i18n_uchar_get_bidi_paired_bracket | ( | i18n_uchar32 | c, |
i18n_uchar32 * | bidi_paired_bracket | ||
) |
Maps the specified character to its paired bracket character.
For bidi_paired_bracket_type!=none, this is the same as u_char_mirror(). Otherwise c itself is returned. See Unicode report
- Since :
- 4.0
- Parameters:
-
[in] c The code point to be mapped [out] bidi_paired_bracket The paired bracket code point, or c itself if there is no such mapping (Bidi_Paired_Bracket_Type=None)
- Returns:
0
on success, otherwise a negative error value
- Return values:
-
I18N_ERROR_NONE Successful I18N_ERROR_INVALID_PARAMETER Invalid function parameter
int i18n_uchar_get_combining_class | ( | i18n_uchar32 | c, |
uint8_t * | combining_class | ||
) |
Returns the combining class of the code point.
- Since :
- 4.0
- Parameters:
-
[in] c The code point of the character [out] combining_class The combining class of the character
- Returns:
0
on success, otherwise a negative error value
- Return values:
-
I18N_ERROR_NONE Successful I18N_ERROR_INVALID_PARAMETER Invalid function parameter
int i18n_uchar_get_fc_nfkc_closure | ( | i18n_uchar32 | c, |
i18n_uchar * | dest, | ||
int32_t | dest_capacity, | ||
int32_t * | length | ||
) |
Gets the FC_NFKC_Closure property string for a character.
See unicode standard annex #15 for details, search for "FC_NFKC_Closure" or for "FNC": Unicode reports .
- Since :
- 4.0
- Parameters:
-
[in] c The character (code point) for which to get the FC_NFKC_Closure string. It must be
.0
<= c <=0x10ffff
[in] dest The destination buffer for copying the string. The string will be zero-terminated if possible. If there is no FC_NFKC_Closure string, then the buffer will be set to the empty string. [in] dest_capacity The capacity of the destination buffer [out] length The length of the string, or 0 if there is no FC_NFKC_Closure string for this character. If the dest_capacity is less than or equal to the length, then the buffer contains the truncated name and the length indicates the full length of the name. The length does not include the zero-termination.
- Returns:
0
on success, otherwise a negative error value
- Return values:
-
I18N_ERROR_NONE Successful I18N_ERROR_INVALID_PARAMETER Invalid function parameter
int i18n_uchar_get_int_property_max_value | ( | i18n_uchar_uproperty_e | which, |
int32_t * | int_max_value | ||
) |
Gets the maximum value for an enumerated/integer/binary Unicode property.
Can be used together with i18n_uchar_get_int_property_min_value to allocate arrays of UnicodeSet or similar. Examples for min/max values (for unicode 3.2): for undefined i18n_uchar_uproperty_e constant values, min/max values will be 0/
-1
.
- Since :
- 4.0
- Parameters:
-
[in] which i18n_uchar_uproperty_e selector constant, identifies which binary property to check. Must be I18N_UCHAR_BINARY_START <= which < I18N_UCHAR_BINARY_LIMIT
orI18N_UCHAR_INT_START <= which < I18N_UCHAR_INT_LIMIT
.[out] int_max_value Maximum value returned by i18n_uchar_get_int_property_value() for a Unicode property. int_max_value will be set to value lower than or equal to 0 if the property selector is out of range.
- Returns:
0
on success, otherwise a negative error value
- Return values:
-
I18N_ERROR_NONE Successful I18N_ERROR_INVALID_PARAMETER Invalid function parameter
int i18n_uchar_get_int_property_min_value | ( | i18n_uchar_uproperty_e | which, |
int32_t * | int_min_value | ||
) |
Gets the minimum value for an enumerated/integer/binary Unicode property.
- Since :
- 4.0
- Parameters:
-
[in] which i18n_uchar_uproperty_e selector constant, identifies which binary property to check. Must be I18N_UCHAR_BINARY_START <= which < I18N_UCHAR_BINARY_LIMIT
orI18N_UCHAR_INT_START <= which < I18N_UCHAR_INT_LIMIT
.[out] int_min_value Minimum value returned by i18n_uchar_get_int_property_value() for a Unicode property. 0
if the property selector is out of range.
- Returns:
0
on success, otherwise a negative error value
- Return values:
-
I18N_ERROR_NONE Successful I18N_ERROR_INVALID_PARAMETER Invalid function parameter
int i18n_uchar_get_int_property_value | ( | i18n_uchar32 | c, |
i18n_uchar_uproperty_e | which, | ||
int32_t * | property_val | ||
) |
Gets the property value for an enumerated property for a code point.
int property_value; i18n_uchar_u_east_asian_width_e east_asian_width; i18n_uchar_get_int_property_value (c, I18N_UCHAR_EAST_ASIAN_WIDTH, &property_value); east_asian_width = (i18n_uchar_u_east_asian_width_e)property_value; bool is_ideographic; i18n_uchar_get_int_property_value(c, I18N_UCHAR_IDEOGRAPHIC, &property_value); is_ideographic = (bool)property_value;
- Since :
- 2.3.1
- Parameters:
-
[in] c The code point to test. [in] which The i18n_uchar_uproperty_e selector constant, identifies which property to check.
Must beI18N_UCHAR_BINARY_START <= which < I18N_UCHAR_BINARY_LIMIT
orI18N_UCHAR_INT_START <= which < I18N_UCHAR_INT_LIMIT
orI18N_UCHAR_MASK_START <= which < I18N_UCHAR_MASK_LIMIT
.[out] property_val The numeric value that is directly the property value or, for enumerated properties, corresponds to the numeric value of the enumerated constant of the respective property value enumeration type (cast to enum type if necessary)
Returns0
or1
(for false/true) for binary Unicode properties
Returns a bit-mask for mask properties
Returns0
if which is out of bounds or if the Unicode version does not have data for the property at all, or not for this code point.
- Return values:
-
I18N_ERROR_NONE Successful I18N_ERROR_INVALID_PARAMETER Invalid function parameter
int i18n_uchar_get_numeric_value | ( | i18n_uchar32 | c, |
double * | numeric_val | ||
) |
Gets the numeric value for a Unicode code point as defined in the Unicode Character Database.
A "double" param type is necessary because some numeric values are fractions, negative, or too large for int32_t. For characters without any numeric values in the Unicode Character Database, numeric_val will be equal to I18N_U_NO_NUMERIC_VALUE. Note: This is different from the Unicode Standard which specifies NaN as the default value. (NaN is not available on all platforms) This function is similar to java.lang.Character.getNumericValue(), but i18n_uchar_get_numeric_value() also supports negative values, large values, and fractions, while Java's getNumericValue() returns values 10..35 for ASCII letters.
- Since :
- 4.0
- Parameters:
-
[in] c The code point to get the numeric value for [out] numeric_val The numeric value of c or I18N_U_NO_NUMERIC_VALUE if none is defined
- Returns:
0
on success, otherwise a negative error value
- Return values:
-
I18N_ERROR_NONE Successful I18N_ERROR_INVALID_PARAMETER Invalid function parameter
- See also:
- I18N_U_NO_NUMERIC_VALUE
int i18n_uchar_get_property_enum | ( | const char * | alias, |
i18n_uchar_uproperty_e * | property_enum | ||
) |
Returns the i18n_uchar_uproperty_e enum for a given property name, as specified in the unicode database.
Short, long, and any other variants are recognized. In addition, this function maps the synthetic names "gcm" / "General_Category_Mask" to the property I18N_UCHAR_GENERAL_CATEGORY_MASK.
- Since :
- 4.0
- Parameters:
-
[in] alias The property name to be matched. The name is compared using "loose matching" [out] property_enum A i18n_uchar_uproperty_e enum, or I18N_UCHAR_INVALID_CODE if the given name does not match any property
- Returns:
0
on success, otherwise a negative error value
- Return values:
-
I18N_ERROR_NONE Successful I18N_ERROR_INVALID_PARAMETER Invalid function parameter
- See also:
- i18n_uchar_uproperty_e
int i18n_uchar_get_property_name | ( | i18n_uchar_uproperty_e | property, |
i18n_uchar_u_property_name_choice_e | name_choice, | ||
const char ** | name | ||
) |
Returns the unicode name for a given property, as given in the unicode database file.
In addition, this function maps the property I18N_UCHAR_GENERAL_CATEGORY_MASK to the synthetic names "gcm" / "General_Category_Mask".
- Since :
- 4.0
- Parameters:
-
[in] property #18n_uchar_uproperty_e selector other than I18N_UCHAR_INVALID_CODE. If out of range, NULL is returned. [in] name_choice Selector for which name to get. If out of range, NULL is returned. All properties have a long name. Most have a short name, but some do not. Unicode allows for additional names; if present these will be returned by I18N_UCHAR_U_LONG_PROPERTY_NAME + i
, wherei = 1, 2,..
.[out] name A pointer to the name, or NULL if either the property or the name_choice is out of range. If a given name_choice returns NULL, then all larger values of name_choice will return NULL, with one exception: if NULL is returned for I18N_UCHAR_U_SHORT_PROPERTY_NAME, then I18N_UCHAR_U_LONG_PROPERTY_NAME (and higher) may still return a non-NULL value. The returned pointer is valid until 18n_uclean_cleanup() (not implemented) is called.
- Returns:
0
on success, otherwise a negative error value
- Return values:
-
I18N_ERROR_NONE Successful I18N_ERROR_INVALID_PARAMETER Invalid function parameter
int i18n_uchar_get_property_value_enum | ( | i18n_uchar_uproperty_e | property, |
const char * | alias, | ||
int32_t * | value_enum | ||
) |
Returns the property value integer for a given value name, as specified in the unicode database.
Short, long, and any other variants are recognized. Some of the names will only be recognized with I18N_UCHAR_GENERAL_CATEGORY_MASK, not I18N_UCHAR_GENERAL_CATEGORY. these include: "C" / "Other", "L" / "Letter", "Lc" / "Cased_Letter", "M" / "Mark", "N" / "Number", "P" / "Punctuation", "S" / "Symbol", and "Z" / "Separator".
- Since :
- 4.0
- Parameters:
-
[in] property i18n_uchar_uproperty_e selector constant. Must be I18N_UCHAR_BINARY_START <= property < I18N_UCHAR_BINARY_LIMIT
orI18N_UCHAR_INT_START <= property < I18N_UCHAR_INT_LIMIT
orI18N_UCHAR_MASK_START <= property < I18N_UCHAR_MASK_LIMIT
. If out of range, I18N_UCHAR_INVALID_CODE is returned.[in] alias The value name to be matched. The name is compared using "loose matching" [out] value_enum A value integer or I18N_UCHAR_INVALID_CODE if the given name does not match any value of the given property, or if the property is invalid. Note: I18N_UCHAR_GENERAL_CATEGORY_MASK values are not values of i18n_uchar_category_e, but rather mask values produced by I18N_U_GET_GC_MASK(). This allows grouped categories such as [:L:] to be represented.
- Returns:
0
on success, otherwise a negative error value
- Return values:
-
I18N_ERROR_NONE Successful I18N_ERROR_INVALID_PARAMETER Invalid function parameter
- See also:
- i18n_uchar_uproperty_e
int i18n_uchar_get_property_value_name | ( | i18n_uchar_uproperty_e | property, |
int32_t | value, | ||
i18n_uchar_u_property_name_choice_e | name_choice, | ||
const char ** | name | ||
) |
Returns the unicode name for a given property value.
Note: some of the names can only be retrieved using I18N_UCHAR_GENERAL_CATEGORY_MASK, not I18N_UCHAR_GENERAL_CATEGORY. These include: "C" / "Other", "L" / "Letter", "Lc" / "Cased_Letter", "M" / "Mark", "N" / "Number", "P" / "Punctuation", "S" / "Symbol", and "Z" / "Separator".
- Since :
- 4.0
- Parameters:
-
[in] property i18n_uchar_uproperty_e selector constant. Must be I18N_UCHAR_BINARY_START <= property < I18N_UCHAR_BINARY_LIMIT
orI18N_UCHAR_INT_START <= property < I18N_UCHAR_INT_LIMIT
orI18N_UCHAR_MASK_START <= property < I18N_UCHAR_MASK_LIMIT
. If out of range, NULL is returned.[in] value Selector for a value for the given property. If out of range, NULL is returned. In general, valid values range from 0
up to some maximum. There are a few exceptions:
I18N_UCHAR_BLOCK values begin at the non-zero value I18N_UCHAR_UBLOCK_BASIC_LATIN.
I18N_UCHAR_CANONICAL_COMBINING_CLASS values are not contiguous and range from 0..240.
I18N_UCHAR_GENERAL_CATEGORY_MASK values are not values of i18n_uchar_category_e, but rather mask values produced by I18N_U_GET_GC_MASK().
This allows grouped categories such as [:L:] to be represented. Mask values range non-contiguously from 1..I18N_U_GC_P_MASK.[in] name_choice Selector for which name to get. If out of range, NULL is returned. All values have a long name. Most have a short name, but some do not. Unicode allows for additional names; if present these will be returned by I18N_UCHAR_U_LONG_PROPERTY_NAME + i
, wherei = 1, 2,..
.[out] name A pointer to the name, or NULL if either the property or the name_choice is out of range. If a given name_choice returns NULL, then all larger values of name_choice will return NULL, with one exception: if NULL is returned for I18N_UCHAR_U_SHORT_PROPERTY_NAME, then I18N_UCHAR_U_LONG_PROPERTY_NAME (and higher) may still return a non-NULL value. The returned pointer is valid until 18n_uclean_cleanup() (not implemented) is called.
- Returns:
0
on success, otherwise a negative error value
- Return values:
-
I18N_ERROR_NONE Successful I18N_ERROR_INVALID_PARAMETER Invalid function parameter
int i18n_uchar_get_ublock_code | ( | i18n_uchar32 | c, |
i18n_uchar_ublock_code_e * | block_val | ||
) |
Gets the Unicode allocation block that contains the character.
- Since :
- 2.3.1
- Parameters:
-
[in] c The code point to test [out] block_val The block value for the code point
- Return values:
-
I18N_ERROR_NONE Successful I18N_ERROR_INVALID_PARAMETER Invalid function parameter
int i18n_uchar_get_unicode_version | ( | i18n_uversion_info | version_array | ) |
Gets the unicode version information.
The version array is filled in with the version information for the unicode standard that is currently used by icu. for example, unicode version 3.1.1 is represented as an array with the values { 3, 1, 1, 0 }.
- Since :
- 4.0
- Parameters:
-
[in] version_array An output array that will be filled in with the Unicode version number
- Returns:
0
on success, otherwise a negative error value
- Return values:
-
I18N_ERROR_NONE Successful I18N_ERROR_INVALID_PARAMETER Invalid function parameter
int i18n_uchar_has_binary_property | ( | i18n_uchar32 | c, |
i18n_uchar_uproperty_e | which, | ||
i18n_ubool * | has_binary_property | ||
) |
Checks a binary unicode property for a code point.
The properties APIs are intended to reflect unicode properties as defined in the Unicode Character Database (UCD) and Unicode Technical Reports (UTR). For details about the properties see Unicode.org.
- Since :
- 4.0
- Parameters:
-
[in] c Code point to test [in] which i18n_uchar_uproperty_e selector constant, identifies which binary property to check. Must be I18N_UCHAR_BINARY_START <= which < I18N_UCHAR_BINARY_LIMIT
.[out] has_binary_property true
orfalse
according to the binary Unicode property value for c. Alsofalse
if which is out of bounds or if the Unicode version does not have data for the property at all, or not for this code point.
- Returns:
0
on success, otherwise a negative error value
- Return values:
-
I18N_ERROR_NONE Successful I18N_ERROR_INVALID_PARAMETER Invalid function parameter
int i18n_uchar_is_alnum | ( | i18n_uchar32 | c, |
i18n_ubool * | is_alnum | ||
) |
Determines whether the specified code point is an alphanumeric character (letter or digit) according to Java.
true
for characters with general categories "L" (letters) and "Nd" (decimal digit numbers). Same as java.lang.Character.isLetterOrDigit(). In addition to being equivalent to a Java function, this also serves as a c/posix migration function. See the comments about c/posix character classification functions in the documentation at the top of this header file.
- Since :
- 4.0
- Parameters:
-
[in] c The code point to be tested [out] is_alnum true
if the code point is an alphanumeric character according to Character.isLetterOrDigit()
- Returns:
0
on success, otherwise a negative error value
- Return values:
-
I18N_ERROR_NONE Successful I18N_ERROR_INVALID_PARAMETER Invalid function parameter
int i18n_uchar_is_alpha | ( | i18n_uchar32 | c, |
i18n_ubool * | is_alpha | ||
) |
Determines whether the specified code point is a letter character.
true
for general categories "L" (letters). Same as java.lang.Character.isLetter(). In addition to being equivalent to a Java function, this also serves as a c/posix migration function. See the comments about c/posix character classification functions in the documentation at the top of this header file.
- Since :
- 4.0
- Parameters:
-
[in] c The code point to be tested [out] is_alpha true
if the code point is a letter character
- Returns:
0
on success, otherwise a negative error value
- Return values:
-
I18N_ERROR_NONE Successful I18N_ERROR_INVALID_PARAMETER Invalid function parameter
int i18n_uchar_is_alphabetic | ( | i18n_uchar32 | c, |
i18n_ubool * | is_alphabetic | ||
) |
Checks if a code point has the Alphabetic Unicode unicode property.
Same as i18n_uchar_has_binary_property(c, I18N_UCHAR_ALPHABETIC). This is different from the i18n_uchar_is_alpha() function.
- Since :
- 4.0
- Parameters:
-
[in] c Code point to test [out] is_alphabetic true
if the code point has the I18N_UCHAR_ALPHABETIC Unicode property,false
otherwise
- Returns:
0
on success, otherwise a negative error value
- Return values:
-
I18N_ERROR_NONE Successful I18N_ERROR_INVALID_PARAMETER Invalid function parameter
int i18n_uchar_is_base | ( | i18n_uchar32 | c, |
i18n_ubool * | is_base | ||
) |
Determines whether the specified code point is a base character.
true
for general categories "L" (letters), "N" (numbers), "Mc" (spacing combining marks), and "Me" (enclosing marks). Note that this is different from the unicode definition in chapter 3.5, conformance clause D13, which defines base characters to be all characters (not Cn) that do not graphically combine with preceding characters (M) and that are neither control (Cc) or format (Cf) characters.
- Since :
- 4.0
- Parameters:
-
[in] c The code point to be tested [out] is_base true
if the code point is a base character according to this function
- Returns:
0
on success, otherwise a negative error value
- Return values:
-
I18N_ERROR_NONE Successful I18N_ERROR_INVALID_PARAMETER Invalid function parameter
int i18n_uchar_is_blank | ( | i18n_uchar32 | c, |
i18n_ubool * | is_blank | ||
) |
Determines whether the specified code point is a "blank" or "horizontal space", a character that visibly separates words on a line.
The following are equivalent definitions: true
for unicode white_space characters except for "vertical space controls" where "vertical space controls" are the following characters: u+000_a (Lf), u+000_b (Vt), u+000_c (Ff), u+000_d (Cr), u+0085 (Nel), u+2028 (Ls), u+2029 (Ps). Same as true
for u+0009 (tab) and characters with general category "Zs" (space separators) except zero width space (zwsp, u+200_b). Note: There are several ICU whitespace functions; please see the utils_i18n_uchar.h file documentation for a detailed comparison. This is a c/posix migration function. See the comments about c/posix character classification functions in the documentation at the top of this header file.
- Since :
- 4.0
- Parameters:
-
[in] c The code point to be tested [out] is_blank true
if the code point is a "blank"
- Returns:
0
on success, otherwise a negative error value
- Return values:
-
I18N_ERROR_NONE Successful I18N_ERROR_INVALID_PARAMETER Invalid function parameter
int i18n_uchar_is_control | ( | i18n_uchar32 | c, |
i18n_ubool * | is_control | ||
) |
Determines whether the specified code point is a control character (as defined by this function).
A control character is one of the following:
ISO 8-bit control character (U+0000..U+001f and U+007f..U+009f)
I18N_UCHAR_U_CONTROL_CHAR (Cc)
I18N_UCHAR_U_FORMAT_CHAR (Cf)
I18N_UCHAR_U_LINE_SEPARATOR (Zl)
I18N_UCHAR_U_PARAGRAPH_SEPARATOR (Zp)
This is a c/posix migration function. See the comments about c/posix character classification functions in the documentation at the top of this header file.
- Since :
- 4.0
- Parameters:
-
[in] c The code point to be tested [out] is_control true
if the code point is a control character
- Returns:
0
on success, otherwise a negative error value
- Return values:
-
I18N_ERROR_NONE Successful I18N_ERROR_INVALID_PARAMETER Invalid function parameter
int i18n_uchar_is_defined | ( | i18n_uchar32 | c, |
i18n_ubool * | is_defined | ||
) |
Determines whether the specified code point is "defined", which usually means that it is assigned a character.
true
for general categories other than "Cn" (other, not assigned), i.e. Note that non-character code points (e.g., u+fdd0) are not "defined" (they are Cn), but surrogate code points are "defined" (Cs). Same as java.lang.Character.isDefined().
- Since :
- 4.0
- Parameters:
-
[in] c The code point to be tested [out] is_defined true
if the code point is assigned a character
- Returns:
0
on success, otherwise a negative error value
- Return values:
-
I18N_ERROR_NONE Successful I18N_ERROR_INVALID_PARAMETER Invalid function parameter
int i18n_uchar_is_digit | ( | i18n_uchar32 | c, |
i18n_ubool * | is_digit | ||
) |
Determines whether the specified code point is a digit character according to Java.
true
for characters with general category "Nd" (decimal digit numbers). Beginning with Unicode 4, this is the same as testing for the I18N_UCHAR_NUMERIC_TYPE of I18N_UCHAR_U_NT_DECIMAL. Same as java.lang.Character.isDigit(). In addition to being equivalent to a Java function, this also serves as a c/posix migration function. See the comments about c/posix character classification functions in the documentation at the top of this header file.
- Since :
- 4.0
- Parameters:
-
[in] c The code point to be tested [out] is_digit true
if the code point is a digit character according to Character.is_digit()
- Returns:
0
on success, otherwise a negative error value
- Return values:
-
I18N_ERROR_NONE Successful I18N_ERROR_INVALID_PARAMETER Invalid function parameter
int i18n_uchar_is_graph | ( | i18n_uchar32 | c, |
i18n_ubool * | is_graph | ||
) |
Determines whether the specified code point is a "graphic" character (printable, excluding, spaces).
true
for all characters except those with general categories "Cc" (control codes), "Cf" (format controls), "Cs" (surrogates), "Cn" (unassigned), and "Z" (separators). This is a c/posix migration function. See the comments about c/posix character classification functions in the documentation at the top of this header file.
- Since :
- 4.0
- Parameters:
-
[in] c The code point to be tested [out] is_graph true
if the code point is a "graphic" character
- Returns:
0
on success, otherwise a negative error value
- Return values:
-
I18N_ERROR_NONE Successful I18N_ERROR_INVALID_PARAMETER Invalid function parameter
int i18n_uchar_is_id_ignorable | ( | i18n_uchar32 | c, |
i18n_ubool * | is_id_ignorable | ||
) |
Determines if the specified character should be regarded as an ignorable character in an identifier, according to java.
true
for characters with general category "Cf" (format controls) as well as non-whitespace ISO controls (u+0000..u+0008, u+000_e..u+001_b, u+007_f..u+009_f). Same as java.lang.Character.isIdentifierIgnorable(). Note that unicode just recommends to ignore Cf (format controls).
- Since :
- 4.0
- Parameters:
-
[in] c The code point to be tested [out] is_id_ignorable true
if the code point is ignorable in identifiers according to Java
- Returns:
0
on success, otherwise a negative error value
- Return values:
-
I18N_ERROR_NONE Successful I18N_ERROR_INVALID_PARAMETER Invalid function parameter
int i18n_uchar_is_id_part | ( | i18n_uchar32 | c, |
i18n_ubool * | is_id_part | ||
) |
Determines if the specified character is permissible in an identifier according to Java.
true
for characters with general categories "L" (letters), "Nl" (letter numbers), "Nd" (decimal digits), "Mc" and "Mn" (combining marks), "Pc" (connecting punctuation), and i18n_uchar_is_id_ignorable(). Same as java.lang.Character.isUnicodeIdentifierPart(). Almost the same as Unicode's ID_Continue (I18N_UCHAR_ID_CONTINUE) except that unicode recommends to ignore Cf which is less than i18n_uchar_is_id_ignorable().
- Since :
- 4.0
- Parameters:
-
[in] c The code point to be tested [out] is_id_part true
if the code point may occur in an identifier according to Java
- Returns:
0
on success, otherwise a negative error value
- Return values:
-
I18N_ERROR_NONE Successful I18N_ERROR_INVALID_PARAMETER Invalid function parameter
int i18n_uchar_is_id_start | ( | i18n_uchar32 | c, |
i18n_ubool * | is_id_start | ||
) |
Determines if the specified character is permissible as the first character in an identifier according to unicode (the unicode standard, version 3.0, chapter 5.16 identifiers).
true
for characters with general categories "L" (letters) and "Nl" (letter numbers). Same as java.lang.Character.isUnicodeIdentifierStart(). Same as I18N_UCHAR_ID_START
- Since :
- 4.0
- Parameters:
-
[in] c The code point to be tested [out] is_id_start true
if the code point may start an identifier
- Returns:
0
on success, otherwise a negative error value
- Return values:
-
I18N_ERROR_NONE Successful I18N_ERROR_INVALID_PARAMETER Invalid function parameter
int i18n_uchar_is_iso_control | ( | i18n_uchar32 | c, |
i18n_ubool * | is_iso_control | ||
) |
Determines whether the specified code point is an ISO control code.
true
for u+0000..u+001f and u+007f..u+009f (general category "cc"). Same as java.lang.Character.isISOControl().
- Since :
- 4.0
- Parameters:
-
[in] c The code point to be tested [out] is_iso_control true
if the code point is an ISO control code
- Returns:
0
on success, otherwise a negative error value
- Return values:
-
I18N_ERROR_NONE Successful I18N_ERROR_INVALID_PARAMETER Invalid function parameter
- See also:
- i18n_uchar_is_control()
int i18n_uchar_is_java_id_part | ( | i18n_uchar32 | c, |
i18n_ubool * | is_java_id_part | ||
) |
Determines if the specified character is permissible in a java identifier.
In addition to i18n_uchar_is_id_part(), true
for characters with general category "Sc" (currency symbols). Same as java.lang.Character.isJavaIdentifierPart().
- Since :
- 4.0
- Parameters:
-
[in] c The code point to be tested [out] is_java_id_part true
if the code point may occur in a Java identifier
- Returns:
0
on success, otherwise a negative error value
- Return values:
-
I18N_ERROR_NONE Successful I18N_ERROR_INVALID_PARAMETER Invalid function parameter
int i18n_uchar_is_java_id_start | ( | i18n_uchar32 | c, |
i18n_ubool * | is_java_id_start | ||
) |
Determines if the specified character is permissible as the first character in a java identifier.
In addition to i18n_uchar_is_id_start(), true
for characters with general categories "Sc" (currency symbols) and "Pc" (connecting punctuation). Same as java.lang.Character.isJavaIdentifierStart().
- Since :
- 4.0
- Parameters:
-
[in] c The code point to be tested [out] is_java_id_start true
if the code point may start a Java identifier
- Returns:
0
on success, otherwise a negative error value
- Return values:
-
I18N_ERROR_NONE Successful I18N_ERROR_INVALID_PARAMETER Invalid function parameter
int i18n_uchar_is_java_space_char | ( | i18n_uchar32 | c, |
i18n_ubool * | is_java_space_char | ||
) |
Determines if the specified code point is a space character according to Java.
true
for characters with general categories "z" (separators), which does not include control codes (e.g., tab or line feed). Same as java.lang.Character.isSpaceChar(). Note: There are several icu whitespace functions; please see the utils_i18n_uchar.h file documentation for a detailed comparison.
- Since :
- 4.0
- Parameters:
-
[in] c The code point to be tested [out] is_java_space_char true
if the code point is a space character according to Character.is_spaceChar()
- Returns:
0
on success, otherwise a negative error value
- Return values:
-
I18N_ERROR_NONE Successful I18N_ERROR_INVALID_PARAMETER Invalid function parameter
int i18n_uchar_is_lower | ( | i18n_uchar32 | c, |
i18n_ubool * | is_lower | ||
) |
Determines whether the specified code point has the general category "Ll" (lowercase letter).
Same as java.lang.Character.isLowerCase(). This misses some characters that are also lowercase but have a different general category value. In order to include those, use I18N_UCHAR_LOWERCASE. In addition to being equivalent to a Java function, this also serves as a c/posix migration function. See the comments about c/posix character classification functions in the documentation at the top of this header file.
- Since :
- 4.0
- Parameters:
-
[in] c The code point to be tested [out] is_lower true
if the code point is an Ll lowercase letter
- Returns:
0
on success, otherwise a negative error value
- Return values:
-
I18N_ERROR_NONE Successful I18N_ERROR_INVALID_PARAMETER Invalid function parameter
int i18n_uchar_is_lowercase | ( | i18n_uchar32 | c, |
i18n_ubool * | is_lowercase | ||
) |
Checks if a code point has the Lowercase Unicode property.
Same as i18n_uchar_has_binary_property(c, I18N_UCHAR_LOWERCASE). This is different from i18n_uchar_is_lower() function.
- Since :
- 4.0
- Parameters:
-
[in] c Code point to test [out] is_lowercase true
if the code point has the I18N_UCHAR_LOWERCASE Unicode property,false
otherwise
- Returns:
0
on success, otherwise a negative error value
- Return values:
-
I18N_ERROR_NONE Successful I18N_ERROR_INVALID_PARAMETER Invalid function parameter
int i18n_uchar_is_mirrored | ( | i18n_uchar32 | c, |
i18n_ubool * | is_mirrored | ||
) |
Determines whether the code point has the Bidi_Mirrored property.
This property is set for characters that are commonly used in right-to-left contexts and need to be displayed with a "mirrored" glyph. Same as java.lang.Character.isMirrored(). Same as I18N_UCHAR_BIDI_MIRRORED.
- Since :
- 4.0
- Parameters:
-
[in] c The code point to be tested [out] is_mirrored true
if the character has the Bidi_Mirrored property
- Returns:
0
on success, otherwise a negative error value
- Return values:
-
I18N_ERROR_NONE Successful I18N_ERROR_INVALID_PARAMETER Invalid function parameter
- See also:
- I18N_UCHAR_BIDI_MIRRORED
int i18n_uchar_is_printable | ( | i18n_uchar32 | c, |
i18n_ubool * | is_printable | ||
) |
Determines whether the specified code point is a printable character.
true
for general categories other than "C" (controls).this is a c/posix migration function. See the comments about c/posix character classification functions in the documentation at the top of this header file.
- Since :
- 4.0
- Parameters:
-
[in] c The code point to be tested [out] is_printable true
if the code point is a printable character
- Returns:
0
on success, otherwise a negative error value
- Return values:
-
I18N_ERROR_NONE Successful I18N_ERROR_INVALID_PARAMETER Invalid function parameter
int i18n_uchar_is_punct | ( | i18n_uchar32 | c, |
i18n_ubool * | is_punct | ||
) |
Determines whether the specified code point is a punctuation character.
true
for characters with general categories "P" (Punctuation).this is a c/posix migration function. See the comments about c/posix character classification functions in the documentation at the top of this header file.
- Since :
- 4.0
- Parameters:
-
[in] c The code point to be tested [out] is_punct true
if the code point is a punctuation character
- Returns:
0
on success, otherwise a negative error value
- Return values:
-
I18N_ERROR_NONE Successful I18N_ERROR_INVALID_PARAMETER Invalid function parameter
int i18n_uchar_is_space | ( | i18n_uchar32 | c, |
i18n_ubool * | is_space | ||
) |
Determines if the specified character is a space character or not.
Note: there are several icu whitespace functions; please see the utils_i18n_uchar.h file documentation for a detailed comparison.this is a c/posix migration function. See the comments about c/posix character classification functions in the documentation at the top of this header file.
- Since :
- 4.0
- Parameters:
-
[in] c The character to be tested [out] is_space true
if the character is a space character;false
otherwise.
- Returns:
0
on success, otherwise a negative error value
- Return values:
-
I18N_ERROR_NONE Successful I18N_ERROR_INVALID_PARAMETER Invalid function parameter
int i18n_uchar_is_title | ( | i18n_uchar32 | c, |
i18n_ubool * | is_title | ||
) |
Determines whether the specified code point is a titlecase letter.
True for general category "Lt" (titlecase letter). Same as java.lang.Character.isTitleCase().
- Since :
- 4.0
- Parameters:
-
[in] c The code point to be tested [out] is_title true
if the code point is an Lt titlecase letter
- Returns:
0
on success, otherwise a negative error value
- Return values:
-
I18N_ERROR_NONE Successful I18N_ERROR_INVALID_PARAMETER Invalid function parameter
int i18n_uchar_is_upper | ( | i18n_uchar32 | c, |
i18n_ubool * | is_upper | ||
) |
Determines whether the specified code point has the general category "Lu" (uppercase letter).
Same as java.lang.Character.isUpperCase(). This misses some characters that are also uppercase but have a different general category value. In order to include those, use I18N_UCHAR_UPPERCASE. In addition to being equivalent to a Java function, this also serves as a c/posix migration function. See the comments about c/posix character classification functions in the documentation at the top of this header file.
- Since :
- 4.0
- Parameters:
-
[in] c The code point to be tested [out] is_upper true
if the code point is an Lu uppercase letter
- Returns:
0
on success, otherwise a negative error value
- Return values:
-
I18N_ERROR_NONE Successful I18N_ERROR_INVALID_PARAMETER Invalid function parameter
int i18n_uchar_is_uppercase | ( | i18n_uchar32 | c, |
i18n_ubool * | is_uppercase | ||
) |
Checks if a code point has the Uppercase Unicode property.
Same as i18n_uchar_has_binary_property(c, I18N_UCHAR_UPPERCASE). This is different from i18n_uchar_is_upper() function.
- Since :
- 4.0
- Parameters:
-
[in] c Code point to test [out] is_uppercase true
if the code point has the I18N_UCHAR_UPPERCASE Unicode property,false
otherwise
- Returns:
0
on success, otherwise a negative error value
- Return values:
-
I18N_ERROR_NONE Successful I18N_ERROR_INVALID_PARAMETER Invalid function parameter
int i18n_uchar_is_white_space | ( | i18n_uchar32 | c, |
i18n_ubool * | is_white_space | ||
) |
Checks if a code point has the White_Space Unicode property.
Same as i18n_uchar_has_binary_property(c, I18N_UCHAR_WHITE_SPACE). This is different from both i18n_uchar_is_space() and i18n_uchar_is_whitespace() functions. Note: There are several icu whitespace functions.
- Since :
- 4.0
- Parameters:
-
[in] c Code point to test [out] is_white_space true
if the code point has the I18N_UCHAR_WHITE_SPACE Unicode property,false
otherwise.
- Returns:
0
on success, otherwise a negative error value
- Return values:
-
I18N_ERROR_NONE Successful I18N_ERROR_INVALID_PARAMETER Invalid function parameter
int i18n_uchar_is_whitespace | ( | i18n_uchar32 | c, |
i18n_ubool * | is_whitespace | ||
) |
Determines if the specified code point is a whitespace character according to Java/ICU.
A character is considered to be a Java whitespace character if and only if it satisfies one of the following criteria:
It is a Unicode Separator character (categories "Z" = "Zs" or "Zl" or "Zp"), but is not also a non-breaking space (U+00A0 NBSP or U+2007 Figure Space or U+202F Narrow NBSP).
It is U+0009 HORIZONTAL TABULATION.
It is U+000A LINE FEED.
It is U+000B VERTICAL TABULATION.
It is U+000C FORM FEED.
It is U+000D CARRIAGE RETURN.
It is U+001C FILE SEPARATOR.
It is U+001D GROUP SEPARATOR.
It is U+001E RECORD SEPARATOR.
It is U+001F UNIT SEPARATOR.
This api tries to sync with the semantics of Java's java.lang.Character.isWhitespace(), but it may not return the exact same results because of the Unicode version difference. Note: unicode 4.0.1 changed u+200_b zero width space from a space separator (Zs) to a format control (Cf). Since then, i18n_uchar_is_whitespace(0x200b) returns false
. See Unicode 4.0.1 Note: there are several icu whitespace functions. Please see the uchar.h file documentation for a detailed comparison.
- Since :
- 4.0
- Parameters:
-
[in] c The code point to be tested [out] is_whitespace true
if the code point is a whitespace character according to Java/ICU
- Returns:
0
on success, otherwise a negative error value
- Return values:
-
I18N_ERROR_NONE Successful I18N_ERROR_INVALID_PARAMETER Invalid function parameter
int i18n_uchar_is_xdigit | ( | i18n_uchar32 | c, |
i18n_ubool * | is_xdigit | ||
) |
Determines whether the specified code point is a hexadecimal digit.
This is equivalent to i18n_uchar_digit(c, 16) >= 0
. true
for characters with general category "Nd" (decimal digit numbers) as well as latin letters a-f and a-f in both ascii and fullwidth ascii. (that is, for letters with code points 0041..0046, 0061..0066, ff21..ff26, ff41..ff46.)
In order to narrow the definition of hexadecimal digits to only ascii characters, use (c <= 0x7f && i18n_uchar_is_xdigit(c))
. This is a c/posix migration function. See the comments about c/posix character classification functions in the documentation at the top of this header file.
- Since :
- 4.0
- Parameters:
-
[in] c The code point to be tested [out] is_xdigit true
if the code point is a hexadecimal digit
- Returns:
0
on success, otherwise a negative error value
- Return values:
-
I18N_ERROR_NONE Successful I18N_ERROR_INVALID_PARAMETER Invalid function parameter
int i18n_uchar_to_lower | ( | i18n_uchar32 | c, |
i18n_uchar32 * | lower | ||
) |
Maps the given character to its lowercase equivalent.
If the character has no lowercase equivalent, the character itself is returned. This function only returns the simple, single-code point case mapping. Full case mappings should be used whenever possible because they produce better results by working on whole strings. They take into account the string context and the language and can map to a result string with a different length as appropriate. Full case mappings are applied by the string case mapping functions, see utils_i18n_ustring.h. See also the user guide chapter on c/posix migration: User Guide: Case Mappings Same as java.lang.Character.toLowerCase().
- Since :
- 4.0
- Parameters:
-
[in] c The code point to be mapped [out] lower The I18N_UCHAR_SIMPLE_LOWERCASE_MAPPING of the code point, if any; otherwise the code point itself.
- Returns:
0
on success, otherwise a negative error value
- Return values:
-
I18N_ERROR_NONE Successful I18N_ERROR_INVALID_PARAMETER Invalid function parameter
int i18n_uchar_to_title | ( | i18n_uchar32 | c, |
i18n_uchar32 * | title | ||
) |
Maps the given character to its titlecase equivalent.
If none is defined, the character itself is returned. This function only returns the simple, single-code point case mapping. Full case mappings should be used whenever possible because they produce better results by working on whole strings. They take into account the string context and the language and can map to a result string with a different length as appropriate. Full case mappings are applied by the string case mapping functions, see utils_i18n_ustring.h. See also the user guide chapter on c/posix migration: User Guide: Case Mappings Same as java.lang.Character.toTitleCase().
- Since :
- 4.0
- Parameters:
-
[in] c The code point to be mapped [out] title The I18N_UCHAR_SIMPLE_TITLECASE_MAPPING of the code point, if any; otherwise the code point itself.
- Returns:
0
on success, otherwise a negative error value
- Return values:
-
I18N_ERROR_NONE Successful I18N_ERROR_INVALID_PARAMETER Invalid function parameter
int i18n_uchar_to_upper | ( | i18n_uchar32 | c, |
i18n_uchar32 * | upper | ||
) |
Maps the given character to its uppercase equivalent.
If the character has no uppercase equivalent, the character itself is returned. This function only returns the simple, single-code point case mapping. Full case mappings should be used whenever possible because they produce better results by working on whole strings. They take into account the string context and the language and can map to a result string with a different length as appropriate. Full case mappings are applied by the string case mapping functions, see utils_i18n_ustring.h. See also the user guide chapter on c/posix migration: User Guide: Case Mappings Same as java.lang.Character.toUpperCase().
- Since :
- 4.0
- Parameters:
-
[in] c The code point to be mapped [out] upper The I18N_UCHAR_SIMPLE_UPPERCASE_MAPPING of the code point, if any; otherwise the code point itself.
- Returns:
0
on success, otherwise a negative error value
- Return values:
-
I18N_ERROR_NONE Successful I18N_ERROR_INVALID_PARAMETER Invalid function parameter