Called when the consumer receives the result of the data change callback adding operation.

The following error codes can be delivered:
DATA_CONTROL_ERROR_NONE,
DATA_CONTROL_ERROR_OUT_OF_MEMORY,
DATA_CONTROL_ERROR_IO_ERROR,
DATA_CONTROL_ERROR_PERMISSION_DENIED,
DATA_CONTROL_ERROR_MAX_EXCEEDED

Since :

3.0

Remarks:

DATA_CONTROL_ERROR_PERMISSION_DENIED will be returned when the provider denies to add the callback.

Parameters:

[in]	provider	The provider handle. provider is valid only inside this function provider should not be destroyed.
[in]	result	Add data change callback result
[in]	callback_id	Added callback ID
[in]	user_data	The user data passed from the add function

Precondition:

The callback must be registered using data_control_add_data_change_cb().

See also:

data_control_add_data_change_cb()

Called when a response is received for a bulk operation from a provider application.

Since :

3.0

Parameters:

[in]	request_id	The request ID
[in]	provider	The provider handle. provider is valid only inside this function. provider should not be destroyed.
[in]	bulk_results	The result data for each insert request. bulk_results is valid only inside this function. bulk_results should not be freed.
[in]	provider_result	Set to true if the data control provider successfully processed, otherwise set to false
[in]	error	The error message from the data control provider. error is valid only inside this function. error should not be freed.
[in]	user_data	The user data passed from the register function

See also:

data_control_sql_register_insert_bulk_data_response_cb()

data_control_map_register_add_bulk_data_response_cb()

Called when received data changed notification from provider application.

Since :

3.0

Parameters:

[in]	provider	The provider handle. provider is valid only inside this function provider should not be destroyed.
[in]	type	Changed data type
[in]	data	Data from provider, intended to contain information about changed data data is valid only inside this function To use outside the callback, make a copy. data should not be freed
[in]	user_data	The user data passed from the add function

Precondition:

The callback must be registered using data_control_add_data_change_cb().
data_control_provider_send_data_change_noti() must be called to invoke this callback.

See also:

data_control_add_data_change_cb()

data_control_provider_send_data_change_noti()

Called when the response is received for an add operation from the key-value structured data control provider.

Since :

2.3

Parameters:

[in]	request_id	The request ID that identifies the data control
[in]	provider	The provider handle. provider is valid only inside this function provider should not be destroyed.
[in]	provider_result	Set to true if the data control provider successfully processed, otherwise set to false
[in]	error	The error message from the data control provider
[in]	user_data	The user data passed from the register function

Called when the result value list is received from the key-value structured data control provider.

Since :

2.3

Remarks:

You must release result_value_list using free() after it is used. Note that result_value_list is an array of char *. Its length is result_value_count. You should release all the elements in the result_value_list array and result_value_list itself like the following code.

  int i;
  for (i = 0; i < resule_value_count; i++)
      free(result_value_list[i]);
  free(result_value_list);

Parameters:

[in]	request_id	The request ID
[in]	provider	The provider handle. provider is valid only inside this function provider should not be destroyed.
[in]	result_value_list	The result value list of the data control request that gets the matching values
[in]	result_value_count	The number of the values
[in]	provider_result	Set to true if the data control provider is successfully processed, otherwise set to false
[in]	error	The error message from the data control provider
[in]	user_data	The user data passed from the register function

Called when the response is received for a remove operation from the key-value structured data control provider.

Since :

2.3

Parameters:

[in]	request_id	The request ID that identifies the data control
[in]	provider	The provider handle. provider is valid only inside this function provider should not be destroyed.
[in]	provider_result	Set to true if the data control provider successfully processed, otherwise set to false
[in]	error	The error message from the data control provider
[in]	user_data	The user data passed from the register function

Called when the response is received for a set operation from the key-value structured data control provider.

Since :

2.3

Parameters:

[in]	request_id	The request ID that identifies the data control
[in]	provider	The provider handle. provider is valid only inside this function provider should not be destroyed.
[in]	provider_result	Set to true if the data control provider successfully processed, otherwise false
[in]	error	The error message from the data control provider
[in]	user_data	The user data passed from the register function

Called when a response is received for a delete operation from an application using the SQL-friendly interface based data control.

Since :

2.3

Parameters:

[in]	request_id	The request ID that identifies the data control
[in]	provider	The provider handle. provider is valid only inside this function provider should not be destroyed
[in]	provider_result	Set to true if the data control provider successfully processed, otherwise set to false
[in]	error	The error message from the data control provider
[in]	user_data	The user data passed from the register function

Called when a response is received for an insert operation from an application using the SQL-friendly interface based data control.

Since :

2.3

Parameters:

[in]	request_id	The request ID
[in]	provider	The provider handle. provider is valid only inside this function provider should not be destroyed
[in]	inserted_row_id	The inserted row ID set by the data control
[in]	provider_result	Set to true if the data control provider successfully processed, otherwise set to false
[in]	error	The error message from the data control provider
[in]	user_data	The user data passed from the register function

Called when a response is received for a select operation from an application using the SQL-friendly interface based data control.

Since :

2.3

Remarks:

enumerator will be removed after the execution of this callback.

Parameters:

[in]	request_id	The request ID
[in]	provider	The provider handle. provider is valid only inside this function provider should not be destroyed
[in]	enumerator	The enumerator for navigating the result of data control select request
[in]	provider_result	Set to true if the data control provider successfully processed, otherwise set to false
[in]	error	The error message from the data control provider
[in]	user_data	The user data passed from the register function

Called when a response is received for an update operation from an application using the SQL-friendly interface based data control.

Since :

2.3

Parameters:

[in]	request_id	The request ID
[in]	provider	The provider handle. provider is valid only inside this function provider should not be destroyed
[in]	provider_result	Set to true if the data control provider successfully processed, otherwise set to false
[in]	error	The error message from the data control provider
[in]	user_data	The user data passed from the register function

The structure type to represent a SQL result set.

This type can be used to enumerate through the result set of an SQL query.

Since :

2.3

Asynchronously adds a data changed callback, which is called whenever the provider's data is changed.

The function attempts to add the callback asynchronously and calls result_callback to inform about the result of the attempt.
If the function is successful, result_callback will be called.
The provider will call any filters which were added for the callback addition process.

Since :

3.0

Privilege Level:

public

Privilege:

http://tizen.org/privilege/datasharing
http://tizen.org/privilege/appmanager.launch

Remarks:

If you want to use this function, you must add privileges.

Parameters:

[in]	provider	Target provider handle
[in]	callback	The callback function to be called when consumer receives data change notification
[in]	user_data	The user data to be passed to the callback function
[in]	result_callback	The callback function to be called when consumer receives add data change callback process result
[in]	result_cb_user_data	The user data to be passed to the result_callback function
[out]	callback_id	Added callback ID, it can be used to remove the callback

Returns:

0 on success, otherwise a negative error value

Return values:

DATA_CONTROL_ERROR_NONE	Successful
DATA_CONTROL_ERROR_PERMISSION_DENIED	Permission denied
DATA_CONTROL_ERROR_INVALID_PARAMETER	Invalid parameter
DATA_CONTROL_ERROR_IO_ERROR	I/O error
DATA_CONTROL_ERROR_OUT_OF_MEMORY	Out of memory

See also:

data_control_data_change_cb()

data_control_add_callback_result_cb()

data_control_provider_add_data_change_consumer_filter_cb()

Adds a bundle to bulk data.

Since :

3.0

Remarks:

The order in which bundles are added is preserved. Bundle indexes start from 0.

Parameters:

[in]	bulk_data	The bulk data handle
[in]	data	The bundle

Returns:

0 on success, otherwise a negative error value

Return values:

DATA_CONTROL_ERROR_NONE	Successful
DATA_CONTROL_ERROR_INVALID_PARAMETER	Invalid parameter
DATA_CONTROL_ERROR_OUT_OF_MEMORY	Out of memory

Creates bulk data.

Since :

3.0

Remarks:

The bulk_data should be released using data_control_bulk_data_destroy().

Parameters:

[out]

bulk_data

The bulk data handle

Returns:

0 on success, otherwise a negative error value

Return values:

DATA_CONTROL_ERROR_NONE	Successful
DATA_CONTROL_ERROR_INVALID_PARAMETER	Invalid parameter
DATA_CONTROL_ERROR_OUT_OF_MEMORY	Out of memory

Destroys bulk data.

Since :

3.0

Parameters:

[in]

bulk_data

The bulk data handle

Returns:

0 on success, otherwise a negative error value

Return values:

DATA_CONTROL_ERROR_NONE	Successful
DATA_CONTROL_ERROR_INVALID_PARAMETER	Invalid parameter

Gets the bulk data bundle count.

Since :

3.0

Parameters:

[in]	bulk_data	The bulk data handle
[out]	count	The bundle count

Returns:

0 on success, otherwise a negative error value

Return values:

DATA_CONTROL_ERROR_NONE	Successful
DATA_CONTROL_ERROR_INVALID_PARAMETER	Invalid parameter

Gets the n-th bundle from bulk data.

Since :

3.0

Remarks:

The data should not be released.
It will be released when data_control_bulk_data_destroy() is called.

Parameters:

[in]	bulk_data	The bulk data handle
[in]	idx	The bundle index. Index starts at 0
[out]	data	The n-th bundle.

Returns:

0 on success, otherwise a negative error value

Return values:

DATA_CONTROL_ERROR_NONE	Successful
DATA_CONTROL_ERROR_INVALID_PARAMETER	Invalid parameter

See also:

data_control_bulk_data_add()

data_control_bulk_data_destroy()

Adds bulk data.

Since :

3.0

Remarks:

The order in which bundles are added is preserved. Bundle indexes start from 0.

Parameters:

[in]	result_data	The bulk result data handle
[in]	data	The bundle
[in]	result	Bulk operation result. Possible values and their meaning are defined by the developer.

Returns:

0 on success, otherwise a negative error value

Return values:

DATA_CONTROL_ERROR_NONE	Successful
DATA_CONTROL_ERROR_INVALID_PARAMETER	Invalid parameter
DATA_CONTROL_ERROR_OUT_OF_MEMORY	Out of memory

See also:

data_control_bulk_result_data_get_result_data()

Creates bulk result data.

Since :

3.0

Remarks:

The result_data should be released using data_control_bulk_result_data_destroy().

Parameters:

[out]

result_data

The bulk result data handle

Returns:

0 on success, otherwise a negative error value

Return values:

DATA_CONTROL_ERROR_NONE	Successful
DATA_CONTROL_ERROR_INVALID_PARAMETER	Invalid parameter
DATA_CONTROL_ERROR_OUT_OF_MEMORY	Out of memory

Destroys bulk result data.

Since :

3.0

Parameters:

[in]

result_data

The bulk result data handle

Returns:

0 on success, otherwise a negative error value

Return values:

DATA_CONTROL_ERROR_NONE	Successful
DATA_CONTROL_ERROR_INVALID_PARAMETER	Invalid parameter

Gets the bulk result data bundle count.

Since :

3.0

Parameters:

[in]	result_data	The bulk result data handle
[out]	count	The bundle count

Returns:

0 on success, otherwise a negative error value

Return values:

DATA_CONTROL_ERROR_NONE	Successful
DATA_CONTROL_ERROR_INVALID_PARAMETER	Invalid parameter

Gets the n-th bundle from bulk result data.

Since :

3.0

Remarks:

The data should not be released.
It will be released when data_control_bulk_result_data_destroy() is called.

Parameters:

[in]	result_data	The bulk result data handle
[in]	idx	The bundle index. Index starts at 0
[out]	data	The n-th bundle
[out]	result	Bulk operation result. Possible values and their meaning are defined by the developer.

Returns:

0 on success, otherwise a negative error value

Return values:

DATA_CONTROL_ERROR_NONE	Successful
DATA_CONTROL_ERROR_INVALID_PARAMETER	Invalid parameter

See also:

data_control_bulk_result_data_add()

data_control_bulk_result_data_destroy()

Adds the value associated with the specified key to the key-values map owned by the key-value structured data control provider.

Since :

2.3

Privilege Level:

public

Privilege:

http://tizen.org/privilege/datasharing
http://tizen.org/privilege/appmanager.launch

Remarks:

If you want to use this function, you must add privileges.

The following example demonstrates how to use the data_control_map_add() method.

  void
  map_add_response_cb(int request_id, data_control_h provider, bool provider_result, const char *error, void *user_data)
  {
      if (provider_result)
          LOGI("The add operation is successful");
      else
          LOGI("The add operation for the request %d is failed. error message: %s", request_id, error);
  }

  data_control_map_response_cb map_callback;

  {
      int result = 0;
      int req_id = 0;
      const char *key = "key";
      const char *value = "value";

      map_callback.add_cb = map_add_response_cb;
      result = data_control_map_register_response_cb(provider, &map_callback, NULL);
      if (result != DATA_CONTROL_ERROR_NONE) {
          LOGE("Registering the callback function is failed with error: %d", result);

          return result;
      }

      result = data_control_map_add(provider, key, value, &req_id);
      if (result != DATA_CONTROL_ERROR_NONE)
          LOGE("Adding %s-%s pair is failed with error: %d", key, value, result);
      else
          LOGI("req_id is %d", req_id);

      return result;
  }

Parameters:

[in]	provider	The provider handle
[in]	key	The key of the value to add
[in]	value	The value to add
[out]	request_id	The request ID

Returns:

0 on success, otherwise a negative error value

Return values:

DATA_CONTROL_ERROR_NONE	Successful
DATA_CONTROL_ERROR_PERMISSION_DENIED	Permission denied
DATA_CONTROL_ERROR_INVALID_PARAMETER	Invalid parameter
DATA_CONTROL_ERROR_IO_ERROR	I/O error
DATA_CONTROL_ERROR_OUT_OF_MEMORY	Out of memory
DATA_CONTROL_ERROR_MAX_EXCEEDED	Too long argument

Adds multiple key-value pairs in one request.

Since :

3.0

Privilege Level:

public

Privilege:

http://tizen.org/privilege/datasharing
http://tizen.org/privilege/appmanager.launch

Remarks:

If you want to use this function, you must add privileges.

The following example demonstrates how to use the data_control_map_add_bulk_data() method.

  void
  map_bulk_add_response_cb(int request_id, data_control_h provider, data_control_bulk_result_data_h bulk_results,
  bool provider_result, const char *error, void *user_data)
  {
      if (provider_result)
          LOGI("The add operation is successful");
      else
          LOGI("The add operation for the request %d is failed. error message: %s", request_id, error);
  }

  data_control_map_response_cb map_callback;
  {
      data_control_bulk_data_h bulk_data;
      int req_id;
      bundle *b1;
      bundle *b2;
      int result = 0;
      int req_id = 0;
      int count;

      result = data_control_map_register_add_bulk_data_response_cb(provider, map_bulk_add_response_cb, user_data);
      if (result != DATA_CONTROL_ERROR_NONE) {
          LOGE("Registering the callback function is failed with error: %d", result);
          return result;
      }

      b1 = bundle_create();
      bundle_add_str(b1, "key", "test key");
      bundle_add_str(b1, "value", "test value");
      b2 = bundle_create();
      bundle_add_str(b2, "key", "test key2");
      bundle_add_str(b2, "value", "test value2");

      data_control_bulk_data_create(&bulk_data);
      data_control_bulk_data_add(bulk_data, b1);
      data_control_bulk_data_add(bulk_data, b2);

      data_control_bulk_data_get_count(bulk_data, &count);
      dlog_print(DLOG_INFO, LOG_TAG, "bulk add count %d ", count);

      data_control_map_add_bulk_data(provider, bulk_data, &req_id);
      data_control_bulk_data_destroy(bulk_data);

      bundle_free(b1);
      bundle_free(b2);
      return result;
  }

Parameters:

[in]	provider	The provider handle
[in]	bulk_data	The bulk data handle
[out]	request_id	The request ID

Returns:

0 on success, otherwise a negative error value

Return values:

DATA_CONTROL_ERROR_NONE	Successful
DATA_CONTROL_ERROR_PERMISSION_DENIED	Permission denied
DATA_CONTROL_ERROR_INVALID_PARAMETER	Invalid parameter
DATA_CONTROL_ERROR_IO_ERROR	I/O error
DATA_CONTROL_ERROR_OUT_OF_MEMORY	Out of memory
DATA_CONTROL_ERROR_MAX_EXCEEDED	Too long argument. Bulk data total length cannot exceed 1MB

Binds the add bulk data callback to the map data control response.

This function is very similar to data_control_map_register_add_bulk_data_response_cb(), which can register a callback for a given provider id. Calling data_control_map_register_add_bulk_data_response_cb() again overwrites the callback previously set for the provider id, which means that only one callback can be set for a given id. data_control_map_bind_add_bulk_data_response_cb() binds a callback to the handle of a provider, which allows registering multiple callbacks for a given provider id. To do that, you can create new data_control_h for the same provider id and register callback for the data_control_h.

Since :

4.0

Remarks:

If you call this function multiple times for the same handle, any previously set callback will be overwritten.

Parameters:

[in]	provider	The provider handle
[in]	callback	The callback function to be called when a response is received
[in]	user_data	The user data to be passed to the callback function

Returns:

0 on success, otherwise a negative error value

Return values:

DATA_CONTROL_ERROR_NONE	Successful
DATA_CONTROL_ERROR_INVALID_PARAMETER	Invalid parameter
DATA_CONTROL_ERROR_IO_ERROR	I/O error
DATA_CONTROL_ERROR_OUT_OF_MEMORY	Out of memory

See also:

data_control_map_register_add_bulk_data_response_cb()

data_control_map_unbind_add_bulk_data_response_cb()

Binds a response callback function to a data control provider handle. The application is notified when a data control response is received from the provider.

This function is very similar to data_control_map_register_response_cb(), which can register a callback for a given provider id. Calling data_control_map_register_response_cb() again overwrites the callback previously set for the provider id, which means that only one callback can be set for a given id. data_control_map_bind_response_cb() binds a callback to the handle of a provider, which allows registering multiple callbacks for a given provider id. To do that, you can create new data_control_h for the same provider id and register callback for the data_control_h.

Since :

4.0

Remarks:

If you call this function multiple times for the same handle, any previously set callback will be overwritten.

Parameters:

[in]	provider	The provider handle
[in]	callback	The callback function to be called when a response is received
[in]	user_data	The user data to be passed to the callback function

Returns:

0 on success, otherwise a negative error value

Return values:

DATA_CONTROL_ERROR_NONE	Successful
DATA_CONTROL_ERROR_INVALID_PARAMETER	Invalid parameter
DATA_CONTROL_ERROR_IO_ERROR	I/O error
DATA_CONTROL_ERROR_OUT_OF_MEMORY	Out of memory

See also:

data_control_map_register_response_cb()

data_control_map_unbind_response_cb()

Creates a provider handle.

Since :

2.3

Remarks:

provider should be destroyed with data_control_map_destroy(). The following example demonstrates how to use the data_control_map_create() method.

  {
      const char *provider_id = "http://tizen.org/datacontrol/provider/example";
      const char *data_id = "table";
      data_control_h provider;
      int result = 0;

      result = data_control_map_create(&provider);
      if (result != DATA_CONTROL_ERROR_NONE) {
          LOGE("Creating data control provider is failed with error: %d", result);

          return result;
      }

      result = data_control_map_set_provider_id(provider, provider_id);
      if (result != DATA_CONTROL_ERROR_NONE) {
          LOGE("Setting providerID is failed with error: %d", result);

          return result;
      }

      result = data_control_map_set_data_id(provider, data_id);
      if (result != DATA_CONTROL_ERROR_NONE) {
          LOGE("Setting dataID is failed with error: %d", result);

          return result;
      }

      // Executes some operations

      result = data_control_map_destroy(provider);
      if (result != DATA_CONTROL_ERROR_NONE)
          LOGE("Destroying data control provider is failed with error: %d", result);

      return result;
  }

Parameters:

[out]

provider

The provider handle

Returns:

0 on success, otherwise a negative error value

Return values:

DATA_CONTROL_ERROR_NONE	Successful
DATA_CONTROL_ERROR_INVALID_PARAMETER	Invalid parameter
DATA_CONTROL_ERROR_OUT_OF_MEMORY	Out of memory

See also:

data_control_map_destroy()

Destroys the provider handle and releases all its resources.

Since :

2.3

Remarks:

When operations of data control are finished, this function must be called to prevent memory leak.

Parameters:

[in]

provider

The provider handle

Returns:

0 on success, otherwise a negative error value

Return values:

DATA_CONTROL_ERROR_NONE	Successful
DATA_CONTROL_ERROR_INVALID_PARAMETER	Invalid parameter

See also:

data_control_map_create()

Gets the value list associated with the specified key from the key-values map owned by the key-value structured data control provider.

Since :

2.3

Privilege Level:

public

Privilege:

http://tizen.org/privilege/datasharing
http://tizen.org/privilege/appmanager.launch

Remarks:

If you want to use this function, you must add privileges.

If the length of value list associated with the key is larger than 20, this function only returns the first 20 values.

The following example demonstrates how to use the data_control_map_get() method.

  void
  map_get_response_cb(int request_id, data_control_h provider, char **result_value_list,
                      int ret_value_count, bool provider_result, const char *error, void *user_data)
  {
      if (provider_result)
          LOGI("The get operation is successful");
      else
          LOGI("The get operation for the request %d is failed. error message: %s", request_id, error);
  }

  data_control_map_response_cb map_callback;

  {
      int result = 0;
      int req_id = 0;
      char *key = "key";

      map_callback.get_cb = map_get_response_cb;
      result = data_control_map_register_response_cb(provider, &map_callback, NULL);
      if (result != DATA_CONTROL_ERROR_NONE) {
          LOGE("Registering the callback function is failed with error: %d", result);

          return result;
      }

      result = data_control_map_get(provider, key, &req_id);
      if (result != DATA_CONTROL_ERROR_NONE)
          LOGE("Getting the value list of the key(%s) is failed with error: %d", key, result);
      else
          LOGI("req_id is %d", req_id);

      return result;
  }

Parameters:

[in]	provider	The provider handle
[in]	key	The key of the value list to obtain
[out]	request_id	The request ID

Returns:

0 on success, otherwise a negative error value

Return values:

DATA_CONTROL_ERROR_NONE	Successful
DATA_CONTROL_ERROR_PERMISSION_DENIED	Permission denied
DATA_CONTROL_ERROR_INVALID_PARAMETER	Invalid parameter
DATA_CONTROL_ERROR_IO_ERROR	I/O error
DATA_CONTROL_ERROR_OUT_OF_MEMORY	Out of memory
DATA_CONTROL_ERROR_MAX_EXCEEDED	Too long argument

See also:

data_control_map_get_with_page()

Gets the data ID.

Since :

2.3

Remarks:

You must release data_id using free() after it is used.

Parameters:

[in]	provider	The provider handle
[out]	data_id	A string for identifying a specific table to operate The string consists of one or more components separated by a slash('/').

Returns:

0 on success, otherwise a negative error value

Return values:

DATA_CONTROL_ERROR_NONE	Successful
DATA_CONTROL_ERROR_INVALID_PARAMETER	Invalid parameter
DATA_CONTROL_ERROR_OUT_OF_MEMORY	Out of memory

See also:

data_control_map_set_data_id()

Gets the handle ID for provider.

Since :

4.0

Remarks:

handle_id is generated internally and it is unique for each handle. This function can be used in callbacks to know for which handle the callback was called.

Parameters:

[in]	provider	The provider handle
[out]	handle_id	The handle ID for provider

Returns:

0 on success, otherwise a negative error value

Return values:

DATA_CONTROL_ERROR_NONE	Successful
DATA_CONTROL_ERROR_INVALID_PARAMETER	Invalid parameter

Gets the Provider ID.

Since :

2.3

Remarks:

You must release provider_id using free() after it is used.

Parameters:

[in]	provider	The provider handle
[out]	provider_id	The data control provider ID

Returns:

0 on success, otherwise a negative error value

Return values:

DATA_CONTROL_ERROR_NONE	Successful
DATA_CONTROL_ERROR_INVALID_PARAMETER	Invalid parameter
DATA_CONTROL_ERROR_OUT_OF_MEMORY	Out of memory

See also:

data_control_map_set_provider_id()

Gets the value list associated with the specified key from the key-values map owned by the key-value structured data control provider, with partition into pages.

Since :

2.3

Privilege Level:

public

Privilege:

http://tizen.org/privilege/datasharing
http://tizen.org/privilege/appmanager.launch

Remarks:

If you want to use this function, you must add privileges.

Parameters:

[in]	provider	The provider handle
[in]	key	The key of the value list to obtain
[out]	request_id	The request ID
[in]	page_number	The page number of the value set It starts from 1.
[in]	count_per_page	The desired maximum count of the data items per page

Returns:

0 on success, otherwise a negative error value

Return values:

DATA_CONTROL_ERROR_NONE	Successful
DATA_CONTROL_ERROR_PERMISSION_DENIED	Permission denied
DATA_CONTROL_ERROR_INVALID_PARAMETER	Invalid parameter
DATA_CONTROL_ERROR_IO_ERROR	I/O error
DATA_CONTROL_ERROR_OUT_OF_MEMORY	Out of memory
DATA_CONTROL_ERROR_MAX_EXCEEDED	Too long argument

See also:

data_control_map_get()

Registers an add bulk data callback for the MAP data control response. The application is notified when a data control response is received from the provider.

Since :

3.0

Remarks:

Only one callback can be registered for each provider id with this function. If you call this function multiple times for the same provider id, any previously set callback will be overwritten.

Parameters:

[in]	provider	The provider handle
[in]	callback	The callback function to be called when a response is received
[in]	user_data	The user data to be passed to the callback function

Returns:

0 on success, otherwise a negative error value

Return values:

DATA_CONTROL_ERROR_NONE	Successful
DATA_CONTROL_ERROR_INVALID_PARAMETER	Invalid parameter
DATA_CONTROL_ERROR_IO_ERROR	I/O error
DATA_CONTROL_ERROR_OUT_OF_MEMORY	Out of memory

See also:

data_control_map_unregister_add_bulk_data_response_cb()

data_control_map_bind_add_bulk_data_response_cb()

Registers a callback function for the key-value structured data control response. The application is notified when a data control response is received from the provider.

Since :

2.3

Remarks:

The application is notified when a data control response is received from the provider.

Only one callback can be registered for each provider id with this function.

If you register multiple callback for same provider id, it will be overwritten by latest one.

Parameters:

[in]	provider	The provider handle
[in]	callback	The callback function to be called when a response is received
[in]	user_data	The user data to be passed to the callback function

Returns:

0 on success, otherwise a negative error value

Return values:

DATA_CONTROL_ERROR_NONE	Successful
DATA_CONTROL_ERROR_INVALID_PARAMETER	Invalid parameter
DATA_CONTROL_ERROR_IO_ERROR	I/O error
DATA_CONTROL_ERROR_OUT_OF_MEMORY	Out of memory

See also:

data_control_map_unregister_response_cb()

data_control_map_bind_response_cb()

Removes the value associated with the specified key from the key-values map owned by the key-value structured data control provider.

Since :

2.3

Privilege Level:

public

Privilege:

http://tizen.org/privilege/datasharing
http://tizen.org/privilege/appmanager.launch

Remarks:

If you want to use this function, you must add privileges.

The following example demonstrates how to use the data_control_map_remove() method.

  void
  map_remove_response_cb(int request_id, data_control_h provider, bool provider_result, const char *error, void *user_data)
  {
      if (provider_result)
          LOGI("The remove operation is successful");
      else
          LOGI("The remove operation for the request %d is failed. error message: %s", request_id, error);
  }

  data_control_map_response_cb map_callback;

  {
      int result = 0;
      int req_id = 0;
      const char *key = "key";
      const char *value = "value";

      map_callback.remove_cb = map_remove_response_cb;
      result = data_control_map_register_response_cb(provider, &map_callback, NULL);
      if (result != DATA_CONTROL_ERROR_NONE) {
          LOGE("Registering the callback function is failed with error: %d", result);

          return result;
      }

      result = data_control_map_remove(provider, key, value, &req_id);
      if (result != DATA_CONTROL_ERROR_NONE)
          LOGE("Removing %s-%s pair is failed with error: %d", key, value, result);
      else
          LOGI("req_id is %d", req_id);

      return result;
  }

Parameters:

[in]	provider	The provider handle
[in]	key	The key of the value to remove
[in]	value	The value to remove
[out]	request_id	The request ID

Returns:

0 on success, otherwise a negative error value

Return values:

DATA_CONTROL_ERROR_NONE	Successful
DATA_CONTROL_ERROR_PERMISSION_DENIED	Permission denied
DATA_CONTROL_ERROR_INVALID_PARAMETER	Invalid parameter
DATA_CONTROL_ERROR_IO_ERROR	I/O error
DATA_CONTROL_ERROR_OUT_OF_MEMORY	Out of memory
DATA_CONTROL_ERROR_MAX_EXCEEDED	Too long argument

Sets the value associated with the specified key to a new value.

Since :

2.3

Privilege Level:

public

Privilege:

http://tizen.org/privilege/datasharing
http://tizen.org/privilege/appmanager.launch

Remarks:

If you want to use this function, you must add privileges.

The following example demonstrates how to use the data_control_map_set() method.

  void
  map_set_response_cb(int request_id, data_control_h provider, bool provider_result, const char *error, void *user_data)
  {
      if (provider_result)
          LOGI("The set operation is successful");
      else
          LOGI("The set operation for the request %d is failed. error message: %s", request_id, error);
  }

  data_control_map_response_cb map_callback;

  {
      int result = 0;
      int req_id = 0;
      char *key = "key";
      char *old_value = "old value";
      char *new_value = "new value";

      map_callback.set_cb = map_set_response_cb;
      result = data_control_map_register_response_cb(provider, &map_callback, NULL);
      if (result != DATA_CONTROL_ERROR_NONE) {
          LOGE("Registering the callback function is failed with error: %d", result);

          return result;
      }

      result = data_control_map_set(provider, key, old_value, new_value, &req_id);
      if (result != DATA_CONTROL_ERROR_NONE)
          LOGE("Replacing old_value(%s) with new_value(%s) is failed with error: %d", old_value, new_value, result);
      else
          LOGI("req_id is %d", req_id);

      return result;
  }

Parameters:

[in]	provider	The provider handle
[in]	key	The key of the value to replace
[in]	old_value	The value to replace
[in]	new_value	The new value that replaces the existing value
[out]	request_id	The request ID

Returns:

0 on success, otherwise a negative error value

Return values:

DATA_CONTROL_ERROR_NONE	Successful
DATA_CONTROL_ERROR_PERMISSION_DENIED	Permission denied
DATA_CONTROL_ERROR_INVALID_PARAMETER	Invalid parameter
DATA_CONTROL_ERROR_IO_ERROR	I/O error
DATA_CONTROL_ERROR_OUT_OF_MEMORY	Out of memory
DATA_CONTROL_ERROR_MAX_EXCEEDED	Too long argument

Sets the Data ID.

Since :

2.3

Parameters:

[in]	provider	The provider handle
[in]	data_id	A string for identifying a specific table to operate The string consists of one or more components separated by a slash('/').

Returns:

0 on success, otherwise a negative error value

Return values:

DATA_CONTROL_ERROR_NONE	Successful
DATA_CONTROL_ERROR_INVALID_PARAMETER	Invalid parameter
DATA_CONTROL_ERROR_OUT_OF_MEMORY	Out of memory

See also:

data_control_map_get_data_id()

Sets the Provider ID.

Since :

2.3

Parameters:

[in]	provider	The provider handle
[in]	provider_id	The data control provider ID

Returns:

0 on success, otherwise a negative error value

Return values:

DATA_CONTROL_ERROR_NONE	Successful
DATA_CONTROL_ERROR_INVALID_PARAMETER	Invalid parameter
DATA_CONTROL_ERROR_OUT_OF_MEMORY	Out of memory

See also:

data_control_map_get_provider_id()

Unbinds the add bulk data callback in the provider.

Since :

4.0

Parameters:

[in]

provider

The provider handle

Returns:

0 on success, otherwise a negative error value

Return values:

DATA_CONTROL_ERROR_NONE	Successful
DATA_CONTROL_ERROR_INVALID_PARAMETER	Invalid parameter

See also:

data_control_map_bind_add_bulk_data_response_cb()

Unbinds the callback function in the provider.

Since :

4.0

Parameters:

[in]

provider

The provider handle

Returns:

0 on success, otherwise a negative error value

Return values:

DATA_CONTROL_ERROR_NONE	Successful
DATA_CONTROL_ERROR_INVALID_PARAMETER	Invalid parameter

See also:

data_control_map_bind_response_cb()

Unregisters the add bulk data callback.

Since :

3.0

Parameters:

[in]

provider

The provider handle

Returns:

0 on success, otherwise a negative error value

Return values:

DATA_CONTROL_ERROR_NONE	Successful
DATA_CONTROL_ERROR_INVALID_PARAMETER	Invalid parameter

See also:

data_control_map_register_add_bulk_data_response_cb()

Unregisters the callback function in the provider.

Since :

2.3

Parameters:

[in]

provider

The provider handle

Returns:

0 on success, otherwise a negative error value

Return values:

DATA_CONTROL_ERROR_NONE	Successful
DATA_CONTROL_ERROR_INVALID_PARAMETER	Invalid parameter

See also:

data_control_map_register_response_cb()

Removes data change callback function.

Since :

3.0

Privilege Level:

public

Privilege:

http://tizen.org/privilege/datasharing
http://tizen.org/privilege/appmanager.launch

Remarks:

If you want to use this function, you must add privileges.

Parameters:

[in]	provider	Target provider handle
[in]	callback_id	Target callback ID

Returns:

0 on success, otherwise a negative error value

Return values:

DATA_CONTROL_ERROR_NONE	Successful
DATA_CONTROL_ERROR_PERMISSION_DENIED	Permission denied
DATA_CONTROL_ERROR_INVALID_PARAMETER	Invalid parameter
DATA_CONTROL_ERROR_IO_ERROR	I/O error
DATA_CONTROL_ERROR_OUT_OF_MEMORY	Out of memory

Binds the insert bulk data callback to the SQL data control response.

This function is very similar to data_control_sql_register_insert_bulk_data_response_cb(), which can register a callback for a given provider id. Calling data_control_sql_register_insert_bulk_data_response_cb() again overwrites the callback previously set for the provider id, which means that only one callback can be set for a given id. data_control_sql_bind_insert_bulk_data_response_cb() binds a callback to the handle of a provider, which allows registering multiple callbacks for a given provider id. To do that, you can create new data_control_h for the same provider id and register callback for the data_control_h.

Since :

4.0

Remarks:

You can bind a callback function to provider. If you call this function multiple times for the same handle, any previously set callback will be overwritten.

Parameters:

[in]	provider	The provider handle
[in]	callback	The callback function to be called when a response is received
[in]	user_data	The user data to be passed to the callback function

Returns:

0 on success, otherwise a negative error value

Return values:

DATA_CONTROL_ERROR_NONE	Successful
DATA_CONTROL_ERROR_INVALID_PARAMETER	Invalid parameter
DATA_CONTROL_ERROR_IO_ERROR	I/O error
DATA_CONTROL_ERROR_OUT_OF_MEMORY	Out of memory

See also:

data_control_sql_register_insert_bulk_data_response_cb()

data_control_sql_unbind_insert_bulk_data_response_cb()

Binds a callback function to the SQL data control response.

This function is very similar to data_control_sql_register_response_cb(), which can register a callback for a given provider id. Calling data_control_sql_register_response_cb() again overwrites the callback previously set for the provider id, which means that only one callback can be set for a given id. data_control_sql_bind_response_cb() binds a callback to the handle of a provider, which allows registering multiple callbacks for a given provider id. To do that, you can create new data_control_h for the same provider id and register callback for the data_control_h.

Since :

4.0

Remarks:

You can bind a callback function to provider. If you call this function multiple times for the same handle, any previously set callback will be overwritten.

Parameters:

[in]	provider	The provider handle
[in]	callback	The callback function to be called when a response is received
[in]	user_data	The user data to be passed to the callback function

Returns:

0 on success, otherwise a negative error value

Return values:

DATA_CONTROL_ERROR_NONE	Successful
DATA_CONTROL_ERROR_INVALID_PARAMETER	Invalid parameter
DATA_CONTROL_ERROR_IO_ERROR	I/O error
DATA_CONTROL_ERROR_OUT_OF_MEMORY	Out of memory

See also:

data_control_sql_register_response_cb()

data_control_sql_unbind_response_cb()

Creates a provider handle.

Since :

2.3

Remarks:

provider should be destroyed with data_control_sql_destroy(). The following example demonstrates how to use the data_control_sql_create() method:

  {
      const char *provider_id = "http://tizen.org/datacontrol/provider/example";
      const char *data_id = "table";
      data_control_h provider;
      int result = 0;

      result = data_control_sql_create(&provider);
      if (result != DATA_CONTROL_ERROR_NONE) {
          LOGE("Creating data control provider is failed with error: %d", result);

          return result;
      }

      result = data_control_sql_set_provider_id(provider, provider_id);
      if (result != DATA_CONTROL_ERROR_NONE) {
          LOGE("Setting providerID is failed with error: %d", result);

          return result;
      }

      result = data_control_sql_set_data_id(provider, data_id);
      if (result != DATA_CONTROL_ERROR_NONE) {
          LOGE("Setting dataID is failed with error: %d", result);

          return result;
      }

      // Executes some operations

      result = data_control_sql_destroy(provider);
      if (result != DATA_CONTROL_ERROR_NONE)
          LOGE("Destroying data control provider is failed with error: %d", result);

      return result;
  }

Parameters:

[out]

provider

The provider handle

Returns:

0 on success, otherwise a negative error value

Return values:

DATA_CONTROL_ERROR_NONE	Successful
DATA_CONTROL_ERROR_INVALID_PARAMETER	Invalid parameter
DATA_CONTROL_ERROR_OUT_OF_MEMORY	Out of memory

See also:

data_control_sql_destroy()

Deletes rows of a table owned by the SQL-type data control provider.

Since :

2.3

Privilege Level:

public

Privilege:

http://tizen.org/privilege/datasharing
http://tizen.org/privilege/appmanager.launch

Remarks:

If you want to use this function, you must add privileges.

If the value is a string, then the value must be wrapped in single quotes, else it does not need to be wrapped in single quotes.

The following example demonstrates how to use the data_control_sql_delete() method:

  void
  sql_delete_response_cb(int request_id, data_control_h provider, bool provider_result, const char *error, void *user_data)
  {
      if (provider_result)
          LOGI(The delete operation is successful");
      else
          LOGI("The delete operation for the request %d is failed. error message: %s", request_id, error);
  }

  data_control_sql_response_cb sql_callback;

  {
      const char *where = "group = 'friend'";
      int result = 0;
      int req_id = 0;

      sql_callback.delete_cb = sql_delete_response_cb;
      result = data_control_sql_register_response_cb(provider, &sql_callback, void *user_data);
      if (result != DATA_CONTROL_ERROR_NONE) {
          LOGE("Registering the callback function is failed with error: %d", result);

          return result;
      }

      result = data_control_sql_delete(provider, where, &req_id);
      if (result != DATA_CONTROL_ERROR_NONE)
          LOGE("Deleting is failed with error: %d", result);
      else
          LOGI("req_id is %d", req_id);

      return result;
  }

Parameters:

[in]	provider	The provider handle
[in]	where	A filter to select the desired rows to delete It is an SQL 'WHERE' clause excluding the 'WHERE' itself such as column1 = 'stringValue' and column2 = numericValue
[out]	request_id	The request ID

Returns:

0 on success, otherwise a negative error value

Return values:

DATA_CONTROL_ERROR_NONE	Successful
DATA_CONTROL_ERROR_PERMISSION_DENIED	Permission denied
DATA_CONTROL_ERROR_INVALID_PARAMETER	Invalid parameter
DATA_CONTROL_ERROR_IO_ERROR	I/O error
DATA_CONTROL_ERROR_OUT_OF_MEMORY	Out of memory

Destroys the provider handle and releases all its resources.

Since :

2.3

Remarks:

When operations of data control are finished, this function must be called to prevent the memory leak.

Parameters:

[in]

provider

The provider handle

Returns:

0 on success, otherwise a negative error value

Return values:

DATA_CONTROL_ERROR_NONE	Successful
DATA_CONTROL_ERROR_INVALID_PARAMETER	Invalid parameter

See also:

data_control_sql_create()

Gets a blob data from the column indicated by the specified index.

Since :

2.3

Parameters:

[in]	cursor	The cursor that navigates the result of the request for the select operation
[in]	column_index	The index of the destination column
[out]	data	The blob value obtained from the column
[out]	size	The size of the data

Returns:

0 on success, otherwise a negative error value

Return values:

DATA_CONTROL_ERROR_NONE	Successful
DATA_CONTROL_ERROR_INVALID_PARAMETER	Invalid parameter
DATA_CONTROL_ERROR_IO_ERROR	I/O error
DATA_CONTROL_ERROR_OUT_OF_MEMORY	Out of memory
DATA_CONTROL_ERROR_MAX_EXCEEDED	Too long argument

Gets the number of columns for this cursor.

Since :

2.3

Parameters:

[in]

cursor

The cursor that navigates the result of the request for the select operation

Returns:

The number of columns in the calling cursor

Return values:

DATA_CONTROL_ERROR_INVALID_PARAMETER

Invalid parameter

Gets the size of the data in the column indicated by the specified index.

Since :

2.3

Parameters:

[in]	cursor	The cursor that navigates the result of the request for the select operation
[in]	column_index	The index of the destination column

Returns:

The size of data in the column indicated by the specified index
If an error is occurred, then a negative value is returned

Return values:

DATA_CONTROL_ERROR_INVALID_PARAMETER	Invalid parameter
DATA_CONTROL_ERROR_IO_ERROR	I/O error

Gets the type of the column indicated by the specified index.

Since :

2.3

Parameters:

[in]	cursor	The cursor that navigates the result of the request for the select operation
[in]	column_index	The index of the destination column
[out]	type	The type of the destination column

Returns:

0 on success, otherwise a negative error value

Return values:

DATA_CONTROL_ERROR_NONE	Successful
DATA_CONTROL_ERROR_INVALID_PARAMETER	Invalid parameter
DATA_CONTROL_ERROR_IO_ERROR	I/O error

Gets the name of the column indicated by the specified index.

Since :

2.3

Parameters:

[in]	cursor	The cursor that navigates the result of the request for the select operation
[in]	column_index	The index of the destination column
[out]	name	The name of the destination column. You should provide a buffer for the column name. The limit of column name length is 4096 bytes

Returns:

0 on success, otherwise a negative error value

Return values:

DATA_CONTROL_ERROR_NONE	Successful
DATA_CONTROL_ERROR_INVALID_PARAMETER	Invalid parameter
DATA_CONTROL_ERROR_IO_ERROR	I/O error
DATA_CONTROL_ERROR_OUT_OF_MEMORY	Out of memory

Gets the data ID.

Since :

2.3

Remarks:

You must release data_id using free() after it is used.

Parameters:

[in]	provider	The provider handle
[out]	data_id	A string for identifying a specific table to operate The string consists of one or more components separated by a slash('/')

Returns:

0 on success, otherwise a negative error value

Return values:

DATA_CONTROL_ERROR_NONE	Successful
DATA_CONTROL_ERROR_INVALID_PARAMETER	Invalid parameter
DATA_CONTROL_ERROR_OUT_OF_MEMORY	Out of memory

See also:

data_control_sql_set_data_id()

Gets a double value from the column indicated by the specified index.

Since :

2.3

Parameters:

[in]	cursor	The cursor that navigates the result of the request for the select operation
[in]	column_index	The index of the destination column
[out]	data	The value obtained from the column as double

Returns:

0 on success, otherwise a negative error value

Return values:

DATA_CONTROL_ERROR_NONE	Successful
DATA_CONTROL_ERROR_INVALID_PARAMETER	Invalid parameter
DATA_CONTROL_ERROR_IO_ERROR	I/O error

Gets the handle ID for provider.

Since :

4.0

Remarks:

handle_id is generated internally and it is unique for each handle. This function can be used in callbacks to know for which handle the callback was called.

Parameters:

[in]	provider	The provider handle
[out]	handle_id	The handle ID for provider

Returns:

0 on success, otherwise a negative error value

Return values:

DATA_CONTROL_ERROR_NONE	Successful
DATA_CONTROL_ERROR_INVALID_PARAMETER	Invalid parameter

Gets a long long value from the column indicated by the specified index.

Since :

2.3

Parameters:

[in]	cursor	The cursor that navigates the result of the request for the select operation
[in]	column_index	The index of the destination column
[out]	data	The 64-bit integer value obtained from the column

Returns:

0 on success, otherwise a negative error value

Return values:

DATA_CONTROL_ERROR_NONE	Successful
DATA_CONTROL_ERROR_INVALID_PARAMETER	Invalid parameter
DATA_CONTROL_ERROR_IO_ERROR	I/O error

Gets an int value from the column indicated by the specified index.

Since :

2.3

Parameters:

[in]	cursor	The cursor that navigates the result of the request for the select operation
[in]	column_index	The index of the destination column
[out]	data	The integer value obtained from the column

Returns:

0 on success, otherwise a negative error value

Return values:

DATA_CONTROL_ERROR_NONE	Successful
DATA_CONTROL_ERROR_INVALID_PARAMETER	Invalid parameter
DATA_CONTROL_ERROR_IO_ERROR	I/O error

Gets the Provider ID.

Since :

2.3

Remarks:

You must release provider_id using free() after it is used.

Parameters:

[in]	provider	The provider handle
[out]	provider_id	The data control provider ID

Returns:

0 on success, otherwise a negative error value

Return values:

DATA_CONTROL_ERROR_NONE	Successful
DATA_CONTROL_ERROR_INVALID_PARAMETER	Invalid parameter
DATA_CONTROL_ERROR_OUT_OF_MEMORY	Out of memory

See also:

data_control_sql_set_provider_id()

Gets a text value from the column indicated by the specified index.

Since :

2.3

Parameters:

[in]	cursor	The cursor that navigates the result of the request for the select operation
[in]	column_index	The index of the destination column
[out]	data	The value obtained from the column as text. You should provide a buffer for the data. You can get the size of data via data_control_sql_get_column_item_size()

Returns:

0 on success, otherwise a negative error value

Return values:

DATA_CONTROL_ERROR_NONE	Successful
DATA_CONTROL_ERROR_INVALID_PARAMETER	Invalid parameter
DATA_CONTROL_ERROR_IO_ERROR	I/O error
DATA_CONTROL_ERROR_OUT_OF_MEMORY	Out of memory

Inserts new rows in a table owned by the SQL-type data control provider.

Since :

2.3

Privilege Level:

public

Privilege:

http://tizen.org/privilege/datasharing
http://tizen.org/privilege/appmanager.launch

Remarks:

If you want to use this function, you must add privileges. The following example demonstrates how to use the data_control_sql_insert() method:

  void
  sql_insert_response_cb(int request_id, data_control_h provider, long long inserted_row_id,
                         bool provider_result, const char *error, void *user_data)
  {
      if (provider_result)
          LOGI("The insert operation is successful");
      else
          LOGI("The insert operation for the request %d is failed. error message: %s", request_id, error);
  }

  data_control_sql_response_cb sql_callback;

  {
      int result = 0;
      int req_id = 0;
      bundle *b = NULL;

      sql_callback.insert_cb = sql_insert_response_cb;
      result = data_control_sql_register_response_cb(provider, &sql_callback, void *user_data);
      if (result != DATA_CONTROL_ERROR_NONE) {
          LOGE("Registering the callback function is failed with error: %d", result);

          return result;
      }

      b = bundle_create();
      bundle_add(b, "WORD", "test");
      bundle_add(b, "WORD_DESC", "test description");

      result = data_control_sql_insert(provider, b, &req_id);
      if (result != DATA_CONTROL_ERROR_NONE)
          LOGE("Inserting is failed with error: %d", result);
      else
          LOGI("req_id is %d", req_id);

      bundle_free(b);

      return result;
  }

Parameters:

[in]	provider	The provider handle
[in]	insert_data	The column-value pairs to insert If the value is a string, then the value must be wrapped in single quotes, else it does not need to be wrapped in single quotes
[out]	request_id	The request ID

Returns:

0 on success, otherwise a negative error value

Return values:

DATA_CONTROL_ERROR_NONE	Successful
DATA_CONTROL_ERROR_PERMISSION_DENIED	Permission denied
DATA_CONTROL_ERROR_INVALID_PARAMETER	Invalid parameter
DATA_CONTROL_ERROR_IO_ERROR	I/O error
DATA_CONTROL_ERROR_OUT_OF_MEMORY	Out of memory
DATA_CONTROL_ERROR_MAX_EXCEEDED	Too long argument

Inserts multiple rows in one request.

Since :

3.0

Privilege Level:

public

Privilege:

http://tizen.org/privilege/datasharing
http://tizen.org/privilege/appmanager.launch

Remarks:

If you want to use this function, you must add privileges.

The following example demonstrates how to use the data_control_sql_insert_bulk_data() method:

  void
  sql_bulk_insert_response_cb(int request_id, data_control_h provider, data_control_bulk_result_data_h bulk_results,
      bool provider_result, const char *error, void *user_data)
  {
      if (provider_result)
          LOGI("The bulk insert operation is successful");
      else
          LOGI("The bulk insert operation for the request %d is failed. error message: %s", request_id, error);
  }

  data_control_sql_response_cb sql_callback;

  {
      data_control_bulk_data_h bulk_data;
      int req_id;
      bundle *b1;
      bundle *b2;
      int result = 0;
      int req_id = 0;
      int bulk_count = 0;

      result = data_control_sql_register_insert_bulk_data_response_cb(provider, sql_bulk_insert_response_cb, user_data);
      if (result != DATA_CONTROL_ERROR_NONE) {
          LOGE("Registering the callback function is failed with error: %d", result);

          return result;
      }

      b1 = bundle_create();
      bundle_add_str(b1, "WORD", "'test'");
      bundle_add_str(b1, "WORD_DESC", "'test description'");
      b2 = bundle_create();
      bundle_add_str(b2, "WORD", "'test2'");
      bundle_add_str(b2, "WORD_DESC", "'test2 description'");

      data_control_bulk_data_create(&bulk_data);
      data_control_bulk_data_add(bulk_data, b1);
      data_control_bulk_data_add(bulk_data, b2);
      data_control_bulk_data_get_count(bulk_data, &bulk_count);

      dlog_print(DLOG_INFO, LOG_TAG, "bulk insert count %d ", bulk_count);

      data_control_sql_insert_bulk_data(provider, bulk_data, &req_id);
      data_control_bulk_data_destroy(bulk_data);

      bundle_free(b1);
      bundle_free(b2);

      return result;
  }

Parameters:

[in]	provider	The provider handle
[in]	bulk_data	The bulk data handle
[out]	request_id	The request ID

Returns:

0 on success, otherwise a negative error value

Return values:

DATA_CONTROL_ERROR_NONE	Successful
DATA_CONTROL_ERROR_PERMISSION_DENIED	Permission denied
DATA_CONTROL_ERROR_INVALID_PARAMETER	Invalid parameter
DATA_CONTROL_ERROR_IO_ERROR	I/O error
DATA_CONTROL_ERROR_OUT_OF_MEMORY	Out of memory
DATA_CONTROL_ERROR_MAX_EXCEEDED	Too long argument

Registers an insert bulk data callback for the SQL data control response. The application is notified when a data control response is received from the provider.

Since :

3.0

Remarks:

Only one callback can be registered for each provider id with this function. If you call this function multiple times for the same provider id, any previously set callback will be overwritten.

Parameters:

[in]	provider	The provider handle
[in]	callback	The callback function to be called when a response is received
[in]	user_data	The user data to be passed to the callback function

Returns:

0 on success, otherwise a negative error value

Return values:

DATA_CONTROL_ERROR_NONE	Successful
DATA_CONTROL_ERROR_INVALID_PARAMETER	Invalid parameter
DATA_CONTROL_ERROR_IO_ERROR	I/O error
DATA_CONTROL_ERROR_OUT_OF_MEMORY	Out of memory

See also:

data_control_sql_unregister_insert_bulk_data_response_cb()

data_control_sql_bind_insert_bulk_data_response_cb()

Registers a callback function for the SQL data control response.

Since :

2.3

Remarks:

The application is notified when a data control response is received from the provider.

Only one callback can be registered for each provider id with this function.

If you register multiple callback for same provider id, it will be overwritten by latest one.

Parameters:

[in]	provider	The provider handle
[in]	callback	The callback function to be called when a response is received
[in]	user_data	The user data to be passed to the callback function

Returns:

0 on success, otherwise a negative error value

Return values:

DATA_CONTROL_ERROR_NONE	Successful
DATA_CONTROL_ERROR_INVALID_PARAMETER	Invalid parameter
DATA_CONTROL_ERROR_IO_ERROR	I/O error
DATA_CONTROL_ERROR_OUT_OF_MEMORY	Out of memory

See also:

data_control_sql_unregister_response_cb()

data_control_sql_bind_response_cb()

Selects the specified columns to be queried.

Since :

2.3

Privilege Level:

public

Privilege:

http://tizen.org/privilege/datasharing
http://tizen.org/privilege/appmanager.launch

Remarks:

If you want to use this function, you must add privileges.

The following example demonstrates how to use the data_control_sql_select() method:

  void
  sql_select_response_cb(int request_id, data_control_h provider, result_set_cursor *enumerator,
                         bool provider_result, const char *error, void *user_data)
  {
      if (provider_result)
          LOGI("The select operation is successful");
      else
          LOGI("The select operation for the request %d is failed. error message: %s", request_id, error);
  }

  data_control_sql_response_cb sql_callback;

  {
      int result = 0;
      int req_id = 0;
      char *column_list[2];
      column_list[0] = "WORD";
      column_list[1] = "WORD_DESC";
      const char *where = "WORD = 'test'";
      const char *order = "WORD ASC";

      sql_callback.select_cb = sql_select_response_cb;
      result = data_control_sql_register_response_cb(provider, &sql_callback, void *user_data);
      if (result != DATA_CONTROL_ERROR_NONE) {
          LOGE("Registering the callback function is failed with error: %d", result);

          return result;
      }

      result = data_control_sql_select(provider, column_list, 2, where, order, &req_id);
      if (result != DATA_CONTROL_ERROR_NONE)
          LOGE("Selecting is failed with error: %d", result);
      else
          LOGI("req_id is %d", req_id);

      return result;
  }

Parameters:

[in]	provider	The provider handle
[in]	column_list	The column list to query
[in]	column_count	The total number of columns to be queried
[in]	where	A filter to select the desired rows It is an SQL 'WHERE' clause excluding the 'WHERE' itself such as column1 = 'stringValue' and column2 = numericValue
[in]	order	The sorting order of the rows to query It is an SQL 'ORDER BY' clause excluding the 'ORDER BY' itself.
[out]	request_id	The request ID

Returns:

0 on success, otherwise a negative error value

Return values:

DATA_CONTROL_ERROR_NONE	Successful
DATA_CONTROL_ERROR_PERMISSION_DENIED	Permission denied
DATA_CONTROL_ERROR_INVALID_PARAMETER	Invalid parameter
DATA_CONTROL_ERROR_IO_ERROR	I/O error
DATA_CONTROL_ERROR_OUT_OF_MEMORY	Out of memory

Selects the specified columns to be queried, with partition into pages.

Since :

2.3

Privilege Level:

public

Privilege:

http://tizen.org/privilege/datasharing
http://tizen.org/privilege/appmanager.launch

Remarks:

If you want to use this function, you must add privileges.

Parameters:

[in]	provider	The provider handle
[in]	column_list	The column list to query
[in]	column_count	The total number of columns to be queried
[in]	where	A filter to select the desired rows It is an SQL 'WHERE' clause excluding the 'WHERE' itself such as column1 = 'stringValue' and column2 = numericValue
[in]	order	The sorting order of the rows to query It is an SQL 'ORDER BY' clause excluding the 'ORDER BY' itself
[in]	page_number	The page number of the result set It starts from 1
[in]	count_per_page	The desired maximum count of rows on a page
[out]	request_id	The request ID

Returns:

0 on success, otherwise a negative error value

Return values:

DATA_CONTROL_ERROR_NONE	Successful
DATA_CONTROL_ERROR_PERMISSION_DENIED	Permission denied
DATA_CONTROL_ERROR_INVALID_PARAMETER	Invalid parameter
DATA_CONTROL_ERROR_IO_ERROR	I/O error
DATA_CONTROL_ERROR_OUT_OF_MEMORY	Out of memory

See also:

data_control_sql_select()

Sets the data ID.

Since :

2.3

Parameters:

[in]	provider	The provider handle
[in]	data_id	A string for identifying a specific table to operate The string consists of one or more components separated by a slash('/')

Returns:

0 on success, otherwise a negative error value

Return values:

DATA_CONTROL_ERROR_NONE	Successful
DATA_CONTROL_ERROR_INVALID_PARAMETER	Invalid parameter
DATA_CONTROL_ERROR_OUT_OF_MEMORY	Out of memory

See also:

data_control_sql_get_data_id()

  {
      bundle *b;
      int ret;

      // Insert data to Note table
      ret = data_control_sql_set_data_id(ad->provider_h, "Note");
      if (ret != DATA_CONTROL_ERROR_NONE)
          dlog_print(DLOG_ERROR, LOG_TAG, "setting data id failed with error: %d", ret);

      b = bundle_create();
      bundle_add_str(b, ""TITLE"", "test");
      bundle_add_str(b, "CONTENTS", "test contents");
      data_control_sql_insert(ad->provider_h, b, &req_id);
      bundle_free(b);

      // Insert data to Dictionary table
      ret = data_control_sql_set_data_id(ad->provider_h, "Dictionary");
      if (ret != DATA_CONTROL_ERROR_NONE)
          dlog_print(DLOG_ERROR, LOG_TAG, "setting data id failed with error: %d", ret);

      b = bundle_create();
      bundle_add_str(b, "WORD", "test");
      bundle_add_str(b, "WORD_DESC", "test desc");
      data_control_sql_insert(ad->provider_h, b, &req_id);
      bundle_free(b);
  }

Sets the Provider ID.

Since :

2.3

Parameters:

[in]	provider	The provider handle
[in]	provider_id	The data control provider ID

Returns:

0 on success, otherwise a negative error value

Return values:

DATA_CONTROL_ERROR_NONE	Successful
DATA_CONTROL_ERROR_INVALID_PARAMETER	Invalid parameter
DATA_CONTROL_ERROR_OUT_OF_MEMORY	Out of memory

See also:

data_control_sql_get_provider_id()

Moves the cursor to the first position.

Since :

2.3

Remarks:

The following example demonstrates how to use the data_control_sql_step_first() method:

  void
  sql_select_response_cb(int request_id, data_control_h provider, result_set_cursor cursor,
                         bool provider_result, const char *error)
  {
      char person_name[32] = {0,};
      long long person_number = -1;

      data_control_sql_step_first(cursor);
      data_control_sql_get_text_data(cursor, 0, person_name);
      data_control_sql_get_int64_data(cursor, 1, &person_number);
      printf("The person %s has the number %l", person_name, person_number);
  }

Parameters:

[in]

cursor

The cursor that navigates the result of the request for the select operation

Returns:

0 on success, otherwise a negative error value

Return values:

DATA_CONTROL_ERROR_NONE	Successful
DATA_CONTROL_ERROR_INVALID_PARAMETER	Invalid parameter
DATA_CONTROL_ERROR_IO_ERROR	I/O error

Moves the cursor to the last position.

Since :

2.3

Remarks:

The following example demonstrates how to use the data_control_sql_step_last() method:

  void
  sql_select_response_cb(int request_id, data_control_h provider, result_set_cursor cursor,
                         bool provider_result, const char *error)
  {
      char person_name[32] = {0,};
      long long person_number = -1;

      data_control_sql_step_last(cursor);
      data_control_sql_get_text_data(cursor, 0, person_name);
      data_control_sql_get_int64_data(cursor, 1, &person_number);
      printf("The person %s has the number %l", person_name, person_number);
  }

Parameters:

[in]

cursor

The cursor that navigates the result of data control select request

Returns:

0 on success, otherwise a negative error value

Return values:

DATA_CONTROL_ERROR_NONE	Successful
DATA_CONTROL_ERROR_INVALID_PARAMETER	Invalid parameter
DATA_CONTROL_ERROR_IO_ERROR	I/O error

Moves the cursor to the next position.

Since :

2.3

Remarks:

The following example demonstrates how to use the data_control_sql_step_next() method:

  void
  sql_select_response_cb(int request_id, data_control_h provider, result_set_cursor cursor,
                         bool provider_result, const char *error)
  {
      char person_name[32] = {0,};
      long long person_number = -1;
      while (data_control_sql_step_next(cursor) == DATA_CONTROL_ERROR_NONE) {
          data_control_sql_get_text_data(cursor, 0, person_name);
          data_control_sql_get_int64_data(cursor, 1, &person_number);
          printf("The person %s has the number %l", person_name, person_number);
      }
  }

Parameters:

[in]

cursor

The cursor that navigates the result of the request for the select operation

Returns:

0 on success, otherwise a negative error value

Return values:

DATA_CONTROL_ERROR_NONE	Successful
DATA_CONTROL_ERROR_INVALID_PARAMETER	Invalid parameter
DATA_CONTROL_ERROR_IO_ERROR	I/O error

Moves the cursor to the previous position.

Since :

2.3

Parameters:

[in]

cursor

The cursor that navigates the result of the request for the select operation

Returns:

0 on success, otherwise a negative error value

Return values:

DATA_CONTROL_ERROR_NONE	Successful
DATA_CONTROL_ERROR_INVALID_PARAMETER	Invalid parameter

Unbinds the insert bulk data callback in the provider.

Since :

4.0

Parameters:

[in]

provider

The provider handle

Returns:

0 on success, otherwise a negative error value

Return values:

DATA_CONTROL_ERROR_NONE	Successful
DATA_CONTROL_ERROR_INVALID_PARAMETER	Invalid parameter

See also:

data_control_sql_bind_insert_bulk_data_response_cb()

Unbinds the callback function in the provider.

Since :

4.0

Parameters:

[in]

provider

The provider handle

Returns:

0 on success, otherwise a negative error value

Return values:

DATA_CONTROL_ERROR_NONE	Successful
DATA_CONTROL_ERROR_INVALID_PARAMETER	Invalid parameter

See also:

data_control_sql_bind_response_cb()

Unregisters the insert bulk data callback.

Since :

3.0

Parameters:

[in]

provider

The provider handle

Returns:

0 on success, otherwise a negative error value

Return values:

DATA_CONTROL_ERROR_NONE	Successful
DATA_CONTROL_ERROR_INVALID_PARAMETER	Invalid parameter

See also:

data_control_sql_register_insert_bulk_data_response_cb()

Unregisters the callback function in the provider.

Since :

2.3

Parameters:

[in]

provider

The provider handle

Returns:

0 on success, otherwise a negative error value

Return values:

DATA_CONTROL_ERROR_NONE	Successful
DATA_CONTROL_ERROR_INVALID_PARAMETER	Invalid parameter

See also:

data_control_sql_register_response_cb()

Updates values of a table owned by the SQL-type data control provider.

Since :

2.3

Privilege Level:

public

Privilege:

http://tizen.org/privilege/datasharing
http://tizen.org/privilege/appmanager.launch

Remarks:

If you want to use this function, you must add privileges. The following example demonstrates how to use the data_control_sql_update() method:

  void
  sql_update_response_cb(int request_id, data_control_h provider, bool provider_result, const char *error, void *user_data)
  {
      if (provider_result)
          LOGI("The update operation is successful");
      else
          LOGI("The update operation for the request %d is failed. error message: %s", request_id, error);
  }

  data_control_sql_response_cb sql_callback;

  {
      int result = 0;
      int req_id = 0;
      const char *where = "WORD = 'test'";
      bundle *b = NULL;

      sql_callback.update_cb = sql_update_response_cb;
      result = data_control_sql_register_response_cb(provider, &sql_callback, void *user_data);
      if (result != DATA_CONTROL_ERROR_NONE) {
          LOGE("Registering the callback function is failed with error: %d", result);

          return result;
      }

      b = bundle_create();
      bundle_add(b, "WORD", "test_new");

      result = data_control_sql_update(provider, b, where, &req_id);
      if (result != DATA_CONTROL_ERROR_NONE)
          LOGE("Updating is failed with error: %d", result);
      else
          LOGI("req_id is %d", req_id);

      bundle_free(b);

      return result;
  }

Parameters:

[in]	provider	The provider handle
[in]	update_data	The column-value pairs to update If the value is a string, the value must be wrapped in single quotes, else it does not need to be wrapped in single quotes
[in]	where	A filter to select the desired rows to update It is an SQL 'WHERE' clause excluding the 'WHERE' itself such as column1 = 'stringValue' and column2 = numericValue
[out]	request_id	The request ID

Returns:

0 on success, otherwise a negative error value

Return values:

DATA_CONTROL_ERROR_NONE	Successful
DATA_CONTROL_ERROR_PERMISSION_DENIED	Permission denied
DATA_CONTROL_ERROR_INVALID_PARAMETER	Invalid parameter
DATA_CONTROL_ERROR_IO_ERROR	I/O error
DATA_CONTROL_ERROR_OUT_OF_MEMORY	Out of memory
DATA_CONTROL_ERROR_MAX_EXCEEDED	Too long argument