This widget holds 2 content objects(Evas_Object): one on the front and one on the back. It allows you to flip from front to back and vice-versa using various animations.

If either the front or back contents are not set the flip will treat that as transparent. So if you wore to set the front content but not the back, and then call elm_flip_go() you would see whatever is below the flip.

For a list of supported animations see elm_flip_go().

Signals that you can add callbacks for are: "animate,begin" - when a flip animation was started "animate,done" - when a flip animation is finished

Default content parts of the flip widget that you can use for are:

"front" - A front content of the flip
"back" - A back content of the flip

This widget inherits from elm-container-class, so that the functions meant to act on it will work for mapbuf objects:

Flip example show how to use most of the API.

Functions
void	elm_flip_interaction_set (Elm_Flip *obj, Elm_Flip_Interaction mode)

Elm_Flip_Interaction	elm_flip_interaction_get (const Elm_Flip *obj)

Eina_Bool	elm_flip_front_visible_get (const Elm_Flip *obj)

void	elm_flip_interaction_direction_hitsize_set (Elm_Flip *obj, Elm_Flip_Direction dir, double hitsize)

double	elm_flip_interaction_direction_hitsize_get (Elm_Flip *obj, Elm_Flip_Direction dir)

void	elm_flip_interaction_direction_enabled_set (Elm_Flip *obj, Elm_Flip_Direction dir, Eina_Bool enabled)

Eina_Bool	elm_flip_interaction_direction_enabled_get (Elm_Flip *obj, Elm_Flip_Direction dir)

void	elm_flip_go (Elm_Flip *obj, Elm_Flip_Mode mode)

void	elm_flip_go_to (Elm_Flip *obj, Eina_Bool front, Elm_Flip_Mode mode)

Evas_Object *	elm_flip_add (Evas_Object *parent)
	Add a new flip to the parent.
void	elm_flip_perspective_set (Evas_Object *obj, Evas_Coord foc, Evas_Coord x, Evas_Coord y)
	Set flip perspective.

Enumeration Type Documentation

enum Elm_Flip_Interaction

No description supplied.

Enumerator:

ELM_FLIP_INTERACTION_NONE	No description
ELM_FLIP_INTERACTION_ROTATE	No description
ELM_FLIP_INTERACTION_CUBE	No description
ELM_FLIP_INTERACTION_PAGE	No description

enum Elm_Flip_Mode

No description supplied.

Enumerator:

ELM_FLIP_ROTATE_Y_CENTER_AXIS	No description
ELM_FLIP_ROTATE_X_CENTER_AXIS	No description
ELM_FLIP_ROTATE_XZ_CENTER_AXIS	No description
ELM_FLIP_ROTATE_YZ_CENTER_AXIS	No description
ELM_FLIP_CUBE_LEFT	No description
ELM_FLIP_CUBE_RIGHT	No description
ELM_FLIP_CUBE_UP	No description
ELM_FLIP_CUBE_DOWN	No description
ELM_FLIP_PAGE_LEFT	No description
ELM_FLIP_PAGE_RIGHT	No description
ELM_FLIP_PAGE_UP	No description
ELM_FLIP_PAGE_DOWN	No description

Function Documentation

Evas_Object* elm_flip_add ( Evas_Object * parent )

Add a new flip to the parent.

Parameters:

parent The parent object

Returns:: The new object or NULL if it cannot be created

Since :: 2.3

Eina_Bool elm_flip_front_visible_get ( const Elm_Flip * obj )

Get flip front visibility state.

Since :: 2.3

Returns:: true if front front is showing, false if the back is showing.

void elm_flip_go	(	Elm_Flip *	obj,
		Elm_Flip_Mode	mode
	)

Runs the flip animation.

Flips the front and back contents using the mode animation. This effectively hides the currently visible content and shows the hidden one.

There a number of possible animations to use for the flipping, these being ELM_FLIP_ROTATE_X_CENTER_AXIS (rotate the currently visible content around a horizontal axis in the middle of its height, the other content is shown as the other side of the flip), ELM_FLIP_ROTATE_Y_CENTER_AXIS (rotate the currently visible content around a vertical axis in the middle of its width, the other content is shown as the other side of the flip), ELM_FLIP_ROTATE_XZ_CENTER_AXIS (rotate the currently visible content around a diagonal axis in the middle of its width, the other content is shown as the other side of the flip), ELM_FLIP_ROTATE_YZ_CENTER_AXIS (rotate the currently visible content around a diagonal axis in the middle of its height, the other content is hown as the other side of the flip). ELM_FLIP_CUBE_LEFT (rotate the currently visible content to the left as if the flip was a cube, the other content is show as the right face of the cube), ELM_FLIP_CUBE_RIGHT (rotate the currently visible content to the right as if the flip was a cube, the other content is show as the left face of the cube), ELM_FLIP_CUBE_UP (rotate the currently visible content up as if the flip was a cube, the other content is show as the bottom face of the cube), ELM_FLIP_CUBE_DOWN (rotate the currently visible content down as if the flip was a cube, the other content is show as the upper face of the cube), ELM_FLIP_PAGE_LEFT (move the currently visible content to the left as if the flip was a book, the other content is shown as the page below that), ELM_FLIP_PAGE_RIGHT (move the currently visible content to the right s if the flip was a book, the other content is shown as the page below that), ELM_FLIP_PAGE_UP (move the currently visible content up as if the flip was a book, the other content is shown as the page below that) and ELM_FLIP_PAGE_DOWN (move the currently visible content down as if the flip was a book, the other content is shown as the page below that).

Since :: 2.3

Parameters:

[in] mode The mode type.

void elm_flip_go_to	(	Elm_Flip *	obj,
		Eina_Bool	front,
		Elm_Flip_Mode	mode
	)

Runs the flip animation to front or back.

Flips the front and back contents using the mode animation. This effectively hides the currently visible content and shows he hidden one.

There a number of possible animations to use for the flipping, these being ELM_FLIP_ROTATE_X_CENTER_AXIS (rotate the currently visible content around a horizontal axis in the middle of its height, the other content is shown as the other side of the flip), ELM_FLIP_ROTATE_Y_CENTER_AXIS (rotate the currently visible content around a vertical axis in the middle of its width, the other content is shown as the other side of the flip), ELM_FLIP_ROTATE_XZ_CENTER_AXIS (rotate the currently visible content around a diagonal axis in the middle of its width, the other content is shown as the other side of the flip), ELM_FLIP_ROTATE_YZ_CENTER_AXIS (rotate the currently visible content around a diagonal axis in the middle of its height, the other content is hown as the other side of the flip). ELM_FLIP_CUBE_LEFT (rotate the currently visible content to the left as if the flip was a cube, the other content is show as the right face of the cube), ELM_FLIP_CUBE_RIGHT (rotate the currently visible content to the right as if the flip was a cube, the other content is show as the left face of the cube), ELM_FLIP_CUBE_UP (rotate the currently visible content up as if the flip was a cube, the other content is show as the bottom face of the cube), ELM_FLIP_CUBE_DOWN (rotate the currently visible content down as if the flip was a cube, the other content is show as the upper face of the cube), ELM_FLIP_PAGE_LEFT (move the currently visible content to the left as if the flip was a book, the other content is shown as the page below that), ELM_FLIP_PAGE_RIGHT (move the currently visible content to the right s if the flip was a book, the other content is shown as the page below that), ELM_FLIP_PAGE_UP (move the currently visible content up as if the flip was a book, the other content is shown as the page below that) and ELM_FLIP_PAGE_DOWN (move the currently visible content down as if the flip was a book, the other content is shown as the page below that).

Since :: 2.3

Parameters:

[in] mode The mode type.

Eina_Bool elm_flip_interaction_direction_enabled_get	(	Elm_Flip *	obj,
		Elm_Flip_Direction	dir
	)

Get the enabled state of that flip direction.

Since :: 2.3

Parameters:

[in] dir The direction to check.

Returns:: If that direction is enabled or not.

void elm_flip_interaction_direction_enabled_set	(	Elm_Flip *	obj,
		Elm_Flip_Direction	dir,
		Eina_Bool	enabled
	)

Set which directions of the flip respond to interactive flip

By default all directions are disabled, so you may want to enable the desired directions for flipping if you need interactive flipping. You must call this function once for each direction that should be enabled.

You can also set the appropriate hit area size by calling elm_flip_interaction_direction_hitsize_set. By default, a minimum hit area will be created on the opposite edge of the flip.

Since :: 2.3

Parameters:

[in] enabled If that direction is enabled or not.

double elm_flip_interaction_direction_hitsize_get	(	Elm_Flip *	obj,
		Elm_Flip_Direction	dir
	)

Get the amount of the flip that is sensitive to interactive flip.

Since :: 2.3

Parameters:

[in] dir The direction to check.

Returns:: The size set for that direction.

void elm_flip_interaction_direction_hitsize_set	(	Elm_Flip *	obj,
		Elm_Flip_Direction	dir,
		double	hitsize
	)

Set the amount of the flip that is sensitive to interactive flip.

Set the amount of the flip that is sensitive to interactive flip, with 0 representing no area in the flip and 1 representing the entire flip. There is however a consideration to be made in that the area will never be smaller than the finger size set (as set in your Elementary configuration), and dragging must always start from the opposite half of the flip (eg. right half of the flip when dragging to the left).

Note:: The dir parameter is not actually related to the direction of the drag, it only refers to the area in the flip where interaction can occur (top, bottom, left, right).

Negative values of hitsize will disable this hit area.

obj	The flip object
foc	The coordinate to set the focus on
x	The X coordinate
y	The Y coordinate

void elm_flip_interaction_set	(	Elm_Flip *	obj,
		Elm_Flip_Interaction	mode
	)

void elm_flip_perspective_set	(	Evas_Object *	obj,
		Evas_Coord	foc,
		Evas_Coord	x,
		Evas_Coord	y
	)

Functions

Enumeration Type Documentation

Function Documentation