Capacity of i18n_userialized_set_s::static_array. Enough for any single-code point set.

Since :

2.3.1

See also:

i18n_userialized_set_s

An i18n_uset_h handle.

Use the i18n_uset_* API to manipulate. Create with i18n_uset_create*, and destroy with i18n_uset_destroy().

Since :

2.3.1

Enumeration for bitmask values to be passed to i18n_uset_pattern_options_create() or i18n_uset_apply_pattern() taking an option parameter.

Since :

2.3.1

Enumerator:

I18N_USET_IGNORE_SPACE	Ignore white space within patterns unless quoted or escaped.
I18N_USET_CASE_INSENSITIVE	Enable case insensitive matching. E.g., "[ab]" with this flag will match 'a', 'A', 'b', and 'B'. "[^ab]" with this flag will match all except 'a', 'A', 'b', and 'B'. This performs a full closure over case mappings, e.g. U+017F for s. The resulting set is a superset of the input for the code points but not for the strings. It performs a case mapping closure of the code points and adds full case folding strings for the code points, and reduces strings of the original set to their full case folding equivalents. This is designed for case-insensitive matches, for example in regular expressions. The full code point case closure allows checking of an input character directly against the closure set. Strings are matched by comparing the case-folded form from the closure set with an incremental case folding of the string in question. The closure set will also contain single code points if the original set contained case-equivalent strings (like U+00DF for "ss" or "Ss" etc.). This is not necessary (that is, redundant) for the above matching method but results in the same closure sets regardless of whether the original set contained the code point or a string.
I18N_USET_ADD_CASE_MAPPINGS	Enable case insensitive matching. E.g., "[ab]" with this flag will match 'a', 'A', 'b', and 'B'. "[^ab]" with this flag will match all except 'a', 'A', 'b', and 'B'. This adds the lower-, title-, and uppercase mappings as well as the case folding of each existing element in the set.

Enumeration for span conditions.

Since :

2.3.1

See also:

i18n_uset_span()

i18n_uset_span_back()

i18n_uset_span_utf8()

i18n_uset_span_back_utf8()

Enumerator:

I18N_USET_SPAN_NOT_CONTAINED	Continue a span() while there is no set element at the current position. Stops before the first set element (character or string). (For code points only, this is like while contains(current) == false). When span() returns, the substring between where it started and the position it returned consists only of characters that are not in the set, and none of its strings overlap with the span.
I18N_USET_SPAN_CONTAINED	Continue a span() while there is a set element at the current position. (For characters only, this is like while contains(current) == true). When span() returns, the substring between where it started and the position it returned consists only of set elements (characters or strings) that are in the set. If a set contains strings, then the span will be the longest substring matching any of the possible concatenations of set elements (characters or strings). (There must be a single, non-overlapping concatenation of characters or strings.) This is equivalent to a POSIX regular expression for (OR of each set element).
I18N_USET_SPAN_SIMPLE	Continue a span() while there is a set element at the current position. (For characters only, this is like while contains(current) == true). When span() returns, the substring between where it started and the position it returned consists only of set elements (characters or strings) that are in the set. If a set only contains single characters, then this is the same as I18N_USET_SPAN_CONTAINED. If a set contains strings, then the span will be the longest substring with a match at each position with the longest single set element (character or string).
I18N_USET_SPAN_CONDITION_COUNT	One more than the last span condition.

Adds the given character to the given i18n_uset_h.

After this call, i18n_uset_contains(set, character) will return true. A frozen set will not be modified.

Since :

2.3.1

Parameters:

[in]	set	The object to which to add the character. Must not be NULL.
[in]	character	The character to add.

Returns:

Error code. Error codes not listed below are described in i18n_error_code_e

Return values:

I18N_ERROR_NONE	Successful
I18N_ERROR_INVALID_PARAMETER	Invalid function parameter

See also:

i18n_uset_contains()

Adds all of the elements in the specified set to this set if they are not already present.

This operation effectively modifies this set so that its value is the union of the two sets. The behavior of this operation is unspecified if the specified collection is modified while the operation is in progress. A frozen set will not be modified.

Since :

2.3.1

Parameters:

[in]	set	The object to which to add the set. Must not be NULL.
[in]	additional_set	The source set whose elements are to be added to this set.

Returns:

Error code. Error codes not listed below are described in i18n_error_code_e

Return values:

I18N_ERROR_NONE	Successful
I18N_ERROR_INVALID_PARAMETER	Invalid function parameter

Adds each of the characters in this string to the set. Thus "ch" => {"c", "h"}.

If this set already any particular character, it has no effect on that character. A frozen set will not be modified.

Since :

2.3.1

Parameters:

[in]	set	The object to which to add the character. Must not be NULL.
[in]	str	The source string.
[in]	str_len	The length of the string, >= 0, or -1 if NULL terminated.

Returns:

Error code. Error codes not listed below are described in i18n_error_code_e

Return values:

I18N_ERROR_NONE	Successful
I18N_ERROR_INVALID_PARAMETER	Invalid function parameter

Adds the given range of characters to the given i18n_uset_h. After this call, i18n_uset_contains(set, start, end) will return true. A frozen set will not be modified.

Since :

2.3.1

Parameters:

[in]	set	The object to which to add the character. Must not be NULL.
[in]	start	The first character of the range to add, inclusive
[in]	end	The last character of the range to add, inclusive

Returns:

Error code. Error codes not listed below are described in i18n_error_code_e

Return values:

I18N_ERROR_NONE	Successful
I18N_ERROR_INVALID_PARAMETER	Invalid function parameter

See also:

i18n_uset_contains()

Adds the given string to the given i18n_uset_h.

After this call, i18n_uset_contains_string(set, str, str_len) will return true. A frozen set will not be modified.

Since :

2.3.1

Parameters:

[in]	set	The object to which to add the character. Must not be NULL.
[in]	str	The string to add.
[in]	str_len	The length of the string, >= 0, or -1 if NULL terminated.

Returns:

Error code. Error codes not listed below are described in i18n_error_code_e

Return values:

I18N_ERROR_NONE	Successful
I18N_ERROR_INVALID_PARAMETER	Invalid function parameter

See also:

i18n_uset_contains_string()

Modifies the set to contain those code points which have the given value for the given binary or enumerated property, as returned by i18n_uchar_get_int_property_value().

Prior contents of this set are lost. A frozen set will not be modified.

Since :

2.3.1

Parameters:

[in]	set	The object to contain the code points defined by the property. Must not be NULL.
[in]	prop	A property in the range I18N_UCHAR_INT_START..I18N_UCHAR_INT_LIMIT-1 or I18N_UCHAR_MASK_START..I18N_UCHAR_MASK_LIMIT-1.
[in]	value	A value in the range i18n_uchar_get_int_property_min_value(prop).. i18n_uchar_get_int_property_max_value(prop), with one exception. If prop is I18N_UCHAR_GENERAL_CATEGORY_MASK, then value should not be a i18n_uchar_category_e, but rather a mask value produced by I18N_U_GET_GC_MASK(). This allows grouped categories such as [:L:] to be represented.

Returns:

Error code. Error codes not listed below are described in i18n_error_code_e

Return values:

I18N_ERROR_NONE	Successful
I18N_ERROR_INVALID_PARAMETER	Invalid function parameter

Modifies the set to represent the set specified by the given pattern.

See the UnicodeSet class description for the syntax of the pattern language. See also the User Guide chapter about UnicodeSet. Empties the set passed before applying the pattern. A frozen set will not be modified.

Remarks:

The specific error code can be obtained using the get_last_result() method. Error codes are described in Exceptions section and in i18n_error_code_e description.

Since :

2.3.1

Parameters:

[in]	set	The set to which the pattern is to be applied. Must not be NULL.
[in]	pattern	A pointer to i18n_uchar string specifying what characters are in the set. The character at pattern[0] must be a '['.
[in]	pattern_length	The length of the i18n_uchar string, >= 0, or -1 if NULL terminated.
[in]	options	A bitmask for options to apply to the pattern. Valid options are I18N_USET_IGNORE_SPACE and I18N_USET_CASE_INSENSITIVE.

Returns:

Upon successful parse, the value is either the index of the character after the closing ']' of the parsed pattern. If the status code indicates failure, then the return value is the index of the error in the source. If set is NULL, 0 is returned.

Exceptions:

I18N_ERROR_NONE	Successful
I18N_ERROR_INVALID_PARAMETER	Invalid function parameter

Modifies the set to contain those code points which have the given value for the given property.

Prior contents of this set are lost. A frozen set will not be modified.

Since :

2.3.1

Parameters:

[in]	set	The object to contain the code points defined by the given property and value alias. Must not be NULL.
[in]	prop	A string specifying a property alias, either short or long. The name is matched loosely. See PropertyAliases.txt for names and a description of loose matching. If the value string is empty, then this string is interpreted as either a General_Category value alias, a Script value alias, a binary property alias, or a special ID. Special IDs are matched loosely and correspond to the following sets:

"ANY" = [\u0000-\U0010FFFF], "ASCII" = [\u0000-\u007F], "Assigned" = [:^Cn:].

Parameters:

[in]	prop_length	The length of the prop, >= 0, or -1 if NULL.
[in]	value	A string specifying a value alias, either short or long. The name is matched loosely. See PropertyValueAliases.txt for names and a description of loose matching. In addition to aliases listed, numeric values and canonical combining classes may be expressed numerically, e.g., ("nv", "0.5") or ("ccc", "220"). The value string may also be empty.
[in]	value_length	The length of the value, >= 0, or -1 if NULL.

Returns:

Error code. Error codes not listed below are described in i18n_error_code_e

Return values:

I18N_ERROR_NONE	Successful
I18N_ERROR_INVALID_PARAMETER	Invalid function parameter

Returns the character at the given index within this set, where the set is ordered by ascending code point.

If the index is out of range, return (i18n_uchar32)-1. The inverse of this function is i18n_uset_index_of().

Remarks:

The specific error code can be obtained using the get_last_result() method. Error codes are described in Exceptions section.

Since :

2.3.1

Parameters:

[in]	set	The set. Must not be NULL.
[in]	char_index	An index from 0..size()-1 to obtain the char for

Returns:

The character at the given index, or (i18n_uchar32)-1.

Exceptions:

I18N_ERROR_NONE	Successful
I18N_ERROR_INVALID_PARAMETER	Invalid function parameter

Removes all of the elements from this set.

This set will be empty after this call returns. A frozen set will not be modified.

Since :

2.3.1

Parameters:

[in]

set

The set. Must not be NULL.

Returns:

Error code. Error codes not listed below are described in i18n_error_code_e

Return values:

I18N_ERROR_NONE	Successful
I18N_ERROR_INVALID_PARAMETER	Invalid function parameter

Returns a copy of this object.

If this set is frozen, then the clone will be frozen as well. Uses i18n_uset_clone_as_thawed() for a mutable clone of a frozen set.

Since :

2.3.1

Parameters:

[in]	set	The original set. Must not be NULL.
[out]	set_clone	The newly allocated copy of the set

Returns:

Error code. Error codes not listed below are described in i18n_error_code_e

Return values:

I18N_ERROR_NONE	Successful
I18N_ERROR_INVALID_PARAMETER	Invalid function parameter

See also:

i18n_uset_clone_as_thawed()

Clones the set and make the clone mutable.

See the ICU4J Freezable interface for details.

Since :

2.3.1

Parameters:

[in]	set	The set. Must not be NULL.
[out]	set_copy	The mutable clone

Returns:

Error code. Error codes not listed below are described in i18n_error_code_e

Return values:

I18N_ERROR_NONE	Successful
I18N_ERROR_INVALID_PARAMETER	Invalid function parameter

See also:

i18n_uset_freeze()

i18n_uset_is_frozen()

i18n_uset_clone()

Reallocates this objects internal structures to take up the least possible space, without changing this object's value.

A frozen set will not be modified.

Since :

2.3.1

Parameters:

[in]

set

The object on which to perfrom the compact. Must not be NULL.

Returns:

Error code. Error codes not listed below are described in i18n_error_code_e

Return values:

I18N_ERROR_NONE	Successful
I18N_ERROR_INVALID_PARAMETER	Invalid function parameter

Inverts this set. This operation modifies this set so that its value is its complement.

This operation does not affect the multicharacter strings, if any. A frozen set will not be modified.

Since :

2.3.1

Parameters:

[in]

set

The set. Must not be NULL.

Returns:

Error code. Error codes not listed below are described in i18n_error_code_e

Return values:

I18N_ERROR_NONE	Successful
I18N_ERROR_INVALID_PARAMETER	Invalid function parameter

Complements in this set all elements contained in the specified set.

Any character in the other set will be removed if it is in this set, or will be added if it is not in this set. A frozen set will not be modified.

Since :

2.3.1

Parameters:

[in]	set	The set with which to complement. Must not be NULL.
[in]	complement	Set that defines which elements will be xor'ed from this set. Must not be NULL.

Returns:

Error code. Error codes not listed below are described in i18n_error_code_e

Return values:

I18N_ERROR_NONE	Successful
I18N_ERROR_INVALID_PARAMETER	Invalid function parameter

Returns true if the given i18n_uset_h contains the given character.

This function works faster with a frozen set.

Remarks:

The specific error code can be obtained using the get_last_result() method. Error codes are described in Exceptions section.

Since :

2.3.1

Parameters:

[in]	set	the set. Must not be NULL.
[in]	character	the codepoint to check for within the set

Returns:

true if set contains the given character

Exceptions:

I18N_ERROR_NONE	Successful
I18N_ERROR_INVALID_PARAMETER	Invalid function parameter

Returns true if set1 contains all the characters and strings of set2. It answers the question, 'Is set1 a superset of set2?'.

Remarks:

The specific error code can be obtained using the get_last_result() method. Error codes are described in Exceptions section.

Since :

2.3.1

Parameters:

[in]	set1	Set to be checked for containment. Must not be NULL.
[in]	set2	Set to be checked for containment. Must not be NULL.

Returns:

true if the test condition is met

Exceptions:

I18N_ERROR_NONE	Successful
I18N_ERROR_INVALID_PARAMETER	Invalid function parameter

Returns true if this set contains all the characters of the given string.

This is does not check containment of grapheme clusters, like i18n_uset_contains_string().

Remarks:

The specific error code can be obtained using the get_last_result() method. Error codes are described in Exceptions section.

Since :

2.3.1

Parameters:

[in]	set	Set of characters to be checked for containment. Must not be NULL.
[in]	str	String containing codepoints to be checked for containment
[in]	str_len	The length of the string, >= 0, or -1 if NULL terminated.

Returns:

true if the test condition is met.

Exceptions:

I18N_ERROR_NONE	Successful
I18N_ERROR_INVALID_PARAMETER	Invalid function parameter

Returns true if set1 contains none of the characters and strings of set2.

It answers the question, 'Is set1 a disjoint set of set2?'

Remarks:

The specific error code can be obtained using the get_last_result() method. Error codes are described in Exceptions section.

Since :

2.3.1

Parameters:

[in]	set1	Set to be checked for containment. Must not be NULL.
[in]	set2	Set to be checked for containment. Must not be NULL.

Returns:

true if the test condition is met

Exceptions:

I18N_ERROR_NONE	Successful
I18N_ERROR_INVALID_PARAMETER	Invalid function parameter

Returns true if the given i18n_uset_h contains all characters c where start <= c && c <= end.

Remarks:

The specific error code can be obtained using the get_last_result() method. Error codes are described in Exceptions section.

Since :

2.3.1

Parameters:

[in]	set	The set. Must not be NULL.
[in]	start	The first character of the range to test, inclusive
[in]	end	The last character of the range to test, inclusive

Returns:

true if set contains the range

Exceptions:

I18N_ERROR_NONE	Successful
I18N_ERROR_INVALID_PARAMETER	Invalid function parameter

Returns true if set1 contains some of the characters and strings of set2.

It answers the question, 'Does set1 and set2 have an intersection?'

Remarks:

The specific error code can be obtained using the get_last_result() method. Error codes are described in Exceptions section.

Since :

2.3.1

Parameters:

[in]	set1	Set to be checked for containment. Must not be NULL.
[in]	set2	Set to be checked for containment. Must not be NULL.

Returns:

true if the test condition is met

Exceptions:

I18N_ERROR_NONE	Successful
I18N_ERROR_INVALID_PARAMETER	Invalid function parameter

Returns true if the given i18n_uset_h contains the given string.

Since :

2.3.1

Remarks:

The specific error code can be obtained using the get_last_result() method. Error codes are described in Exceptions section.

Parameters:

[in]	set	The set. Must not be NULL.
[in]	str	The string.
[in]	str_len	The length of the string, >= 0, or -1 if NULL terminated

Returns:

true if set contains str

Exceptions:

I18N_ERROR_NONE	Successful
I18N_ERROR_INVALID_PARAMETER	Invalid function parameter

Creates an i18n_uset_h object that contains the range of characters start..end, inclusive.

If start > end then an empty set is created (same as using i18n_uset_empty_create()).

Since :

2.3.1

Parameters:

[in]	start	First character of the range, inclusive
[in]	end	Last character of the range, inclusive
[out]	set	A pointer to the newly created i18n_uset_h object. The caller must call i18n_uset_destroy() on it when done. *

Returns:

Error code. Error codes not listed below are described in i18n_error_code_e

Return values:

I18N_ERROR_NONE	Successful
I18N_ERROR_INVALID_PARAMETER	Invalid function parameter

See also:

i18n_uset_destroy()

Creates an empty i18n_uset_h object.

Equivalent to i18n_uset_create(1, 0).

Since :

2.3.1

Parameters:

[out]

set

A pointer to the newly created i18n_uset_h. The caller must call i18n_uset_destroy() on it when done.

Returns:

Error code. Error codes not listed below are described in i18n_error_code_e

Return values:

I18N_ERROR_NONE	Successful
I18N_ERROR_INVALID_PARAMETER	Invalid function parameter

See also:

i18n_uset_destroy()

Creates a set based on a given pattern.

See the UnicodeSet class description for the syntax of the pattern language.

Since :

2.3.1

Parameters:

[in]	pattern	A string specifying what characters are in the set
[in]	pattern_length	The length of the pattern, >= 0, or -1 if NULL-terminated.
[out]	set	A pointer to the newly created i18n_uset_h object. The caller must call i18n_uset_destroy() on it when done. *

Returns:

Error code. Error codes not listed below are described in i18n_error_code_e

Return values:

I18N_ERROR_NONE	Successful
I18N_ERROR_INVALID_PARAMETER	Invalid function parameter

See also:

i18n_uset_destroy()

Creates a set based on a given pattern.

See the UnicodeSet class description for the syntax of the pattern language.

Since :

2.3.1

Parameters:

[in]	pattern	A string specifying what characters are in the set
[in]	pattern_length	The length of the pattern, >= 0, or -1 if NULL-terminated
[in]	options	Bitmask for options to apply to the pattern. Valid options are I18N_USET_IGNORE_SPACE and I18N_USET_CASE_INSENSITIVE.
[out]	set	A pointer to the newly created i18n_uset_h object. The caller must call i18n_uset_destroy() on it when done.

Returns:

Error code. Error codes not listed below are described in i18n_error_code_e

Return values:

I18N_ERROR_NONE	Successful
I18N_ERROR_INVALID_PARAMETER	Invalid function parameter

See also:

i18n_uset_destroy()

Disposes of the storage used by a i18n_uset_h object.

This function should be called exactly once for objects returned by i18n_uset_create().

Since :

2.3.1

Parameters:

[in]

set

The object to dispose of

Returns:

Error code. Error codes not listed below are described in i18n_error_code_e

Return values:

I18N_ERROR_NONE	Successful
I18N_ERROR_INVALID_PARAMETER	Invalid function parameter

Closes this set over the given attribute.

For the attribute I18N_USET_CASE_INSENSITIVE, the result is to modify this set so that:

1. For each character or string 'a' in this set, all strings or characters 'b' such that foldCase(a) == foldCase(b) are added to this set.

2. For each string 'e' in the resulting set, if e != foldCase(e), 'e' will be removed.

Example: [aq\u00DF{Bc}{bC}{Fi}] => [aAqQ\u00DF\uFB01{ss}{bc}{fi}]

(Here foldCase(x) refers to the operation i18n_ustring_fold_case(), and a == b denotes that the contents are the same, not pointer comparison.)

A frozen set will not be modified.

Since :

2.3.1

Parameters:

[in]	set	The set. Must not be NULL.
[in]	attributes	Bitmask for attributes to close over. Currently only the I18N_USET_CASE_INSENSITIVE bit is supported. Any undefined bits are ignored.

Returns:

Error code. Error codes not listed below are described in i18n_error_code_e

Return values:

I18N_ERROR_NONE	Successful
I18N_ERROR_INVALID_PARAMETER	Invalid function parameter

See also:

i18n_ustring_fold_case()

Returns true if set1 contains all of the characters and strings of set2, and vice versa. It answers the question, 'Is set1 equal to set2?'.

Remarks:

The specific error code can be obtained using the get_last_result() method. Error codes are described in Exceptions section.

Since :

2.3.1

Parameters:

[in]	set1	Set to be checked for containment. Must not be NULL.
[in]	set2	Set to be checked for containment. Must not be NULL.

Returns:

true if the test condition is met

Exceptions:

I18N_ERROR_NONE	Successful
I18N_ERROR_INVALID_PARAMETER	Invalid function parameter

Freezes the set (make it immutable).

Once frozen, it cannot be unfrozen and is therefore thread-safe until it is deleted. See the ICU4J Freezable interface for details. Freezing the set may also make some operations faster, for example i18n_uset_contains() and i18n_uset_span(). A frozen set will not be modified. (It remains frozen.)

Since :

2.3.1

Parameters:

[in]

set

The set. Must not be NULL.

Returns:

the same set, now frozen

Error code. Error codes not listed below are described in i18n_error_code_e

Return values:

I18N_ERROR_NONE	Successful
I18N_ERROR_INVALID_PARAMETER	Invalid function parameter

See also:

i18n_uset_is_frozen()

i18n_uset_clone_as_thawed()

Returns an item of this set.

An item is either a range of characters or a single multicharacter string.

Remarks:

The specific error code can be obtained using the get_last_result() method. Error codes are described in Exceptions section.

Since :

2.3.1

Parameters:

[in]	set	The set. Must not be NULL.
[in]	item_index	A non-negative integer in the range [0; i18n_uset_get_item_count(set)-1].
[in]	start	Pointer to variable to receive first character in range, inclusive
[in]	end	Pointer to variable to receive last character in range, inclusive
[out]	str	Buffer to receive the string, may be NULL
[in]	str_capacity	Capacity of str, or 0 if str is NULL

Returns:

The length of the string (>= 2), or 0 if the item is a range, in which case it is the range *start..*end, or -1 if item_index is out of range

Exceptions:

I18N_ERROR_NONE	Successful
I18N_ERROR_INVALID_PARAMETER	Invalid function parameter

Returns the number of items in this set.

An item is either a range of characters or a single multicharacter string.

Remarks:

The specific error code can be obtained using the get_last_result() method. Error codes are described in Exceptions section.

Since :

2.3.1

Parameters:

[in]

set

The set. Must not be NULL.

Returns:

A non-negative integer counting the character ranges and/or strings contained in set.

Exceptions:

I18N_ERROR_NONE	Successful
I18N_ERROR_INVALID_PARAMETER	Invalid function parameter

Returns a range of characters contained in the given serialized set.

Remarks:

The specific error code can be obtained using the get_last_result() method. Error codes are described in Exceptions section.

Since :

2.3.1

Parameters:

[in]	set	The serialized set. Must not be NULL.
[in]	range_index	A non-negative integer in the range 0.. i18n_uset_get_serialized_range_count(set)-1
[out]	p_start	Pointer to variable to receive first character in range, inclusive
[out]	p_end	Pointer to variable to receive last character in range, inclusive

Returns:

true if range_index is valid, otherwise false

Exceptions:

I18N_ERROR_NONE	Successful
I18N_ERROR_INVALID_PARAMETER	Invalid function parameter

See also:

i18n_userialized_set_s

Returns the number of disjoint ranges of characters contained in the given serialized set.

Ignores any strings contained in the set.

Remarks:

The specific error code can be obtained using the get_last_result() method. Error codes are described in Exceptions section.

Since :

2.3.1

Parameters:

[in]

set

The serialized set. Must not be NULL.

Returns:

A non-negative integer counting the character ranges contained in set

Exceptions:

I18N_ERROR_NONE	Successful
I18N_ERROR_INVALID_PARAMETER	Invalid function parameter

See also:

i18n_userialized_set_s

Given a serialized array, fill in the given serialized set object.

Remarks:

The specific error code can be obtained using the get_last_result() method. Error codes are described in Exceptions section.

Since :

2.3.1

Parameters:

[in]	src	pointer to start of array. Must not be NULL.
[in]	src_length	length of src array, >= 0.
[out]	fill_set	the serialized set to be filled

Returns:

true if the given array is valid, otherwise false

Exceptions:

I18N_ERROR_NONE	Successful
I18N_ERROR_INVALID_PARAMETER	Invalid function parameter

See also:

i18n_userialized_set_s

Returns the index of the given character within this set, where the set is ordered by ascending code point.

If the character is not in this set, return -1. The inverse of this function is i18n_uset_char_at().

Remarks:

The specific error code can be obtained using the get_last_result() method. Error codes are described in Exceptions section.

Since :

2.3.1

Parameters:

[in]	set	the set. Must not be NULL.
[in]	character	the character to obtain the index for

Returns:

An index from 0..size()-1, or -1

Exceptions:

I18N_ERROR_NONE	Successful
I18N_ERROR_INVALID_PARAMETER	Invalid function parameter

Returns true if the given i18n_uset_h contains no characters and no strings.

Remarks:

The specific error code can be obtained using the get_last_result() method. Error codes are described in Exceptions section.

Since :

2.3.1

Parameters:

[in]

set

The set. Must not be NULL.

Returns:

true if set is empty

Exceptions:

I18N_ERROR_NONE	Successful
I18N_ERROR_INVALID_PARAMETER	Invalid function parameter

Determines whether the set has been frozen (made immutable) or not.

See the ICU4J Freezable interface for details.

Remarks:

The specific error code can be obtained using the get_last_result() method. Error codes are described in Exceptions section.

Since :

2.3.1

Parameters:

[in]

set

The set. Must not be NULL.

Returns:

true/false for whether the set has been frozen

Exceptions:

I18N_ERROR_NONE	Successful
I18N_ERROR_INVALID_PARAMETER	Invalid function parameter

See also:

i18n_uset_freeze()

i18n_uset_clone_as_thawed()

Removes the given character from the given i18n_uset_h.

After this call, i18n_uset_contains(set, character) will return false. A frozen set will not be modified.

Since :

2.3.1

Parameters:

[in]	set	the object from which to remove the character. Must not be NULL.
[in]	character	the character to remove

Returns:

Error code. Error codes not listed below are described in i18n_error_code_e

Return values:

I18N_ERROR_NONE	Successful
I18N_ERROR_INVALID_PARAMETER	Invalid function parameter

See also:

i18n_uset_contains()

Removes from this set all of its elements that are contained in the specified set.

This operation effectively modifies this set so that its value is the asymmetric set difference of the two sets. A frozen set will not be modified.

Since :

2.3.1

Parameters:

[in]	set	The object from which the elements are to be removed. Must not be NULL.
[in]	remove_set	The object that defines which elements will be removed from this set. Must not be NULL.

Returns:

Error code. Error codes not listed below are described in i18n_error_code_e

Return values:

I18N_ERROR_NONE	Successful
I18N_ERROR_INVALID_PARAMETER	Invalid function parameter

Removes all strings from this set.

Since :

2.3.1

Parameters:

[in]

set

The set. Must not be NULL.

Returns:

Error code. Error codes not listed below are described in i18n_error_code_e

Return values:

I18N_ERROR_NONE	Successful
I18N_ERROR_INVALID_PARAMETER	Invalid function parameter

Removes the given range of characters from the given i18n_uset_h.

After this call, i18n_uset_contains(set, start, end) will return false. A frozen set will not be modified.

Since :

2.3.1

Parameters:

[in]	set	The object to which to add the character. Must not be NULL.
[in]	start	The first character of the range to remove, inclusive
[in]	end	The last character of the range to remove, inclusive

Returns:

Error code. Error codes not listed below are described in i18n_error_code_e

Return values:

I18N_ERROR_NONE	Successful
I18N_ERROR_INVALID_PARAMETER	Invalid function parameter

See also:

i18n_uset_contains()

Removes the given string to the given i18n_uset_h.

After this call, i18n_uset_contains_string(set, str, str_len) will return false. A frozen set will not be modified.

Since :

2.3.1

Parameters:

[in]	set	The object to which to add the character. Must not be NULL.
[in]	str	The string to remove.
[in]	str_len	The length of the string, >= 0, or -1 if NULL terminated.

Returns:

Error code. Error codes not listed below are described in i18n_error_code_e

Return values:

I18N_ERROR_NONE	Successful
I18N_ERROR_INVALID_PARAMETER	Invalid function parameter

See also:

i18n_uset_contains_string()

Return true if the given position, in the given pattern, appears to be the start of a UnicodeSet pattern.

Since :

2.3.1

Remarks:

The specific error code can be obtained using the get_last_result() method. Error codes are described in Exceptions section.

Parameters:

[in]	pattern	A string specifying the pattern.
[in]	pattern_length	The length of the pattern, >= 0, or -1 if NULL.
[in]	pos	The given position, >= 0.

Returns:

true if the given position, in the given pattern, appears to be the start of a UnicodeSet pattern.

Exceptions:

I18N_ERROR_NONE	Successful
I18N_ERROR_INVALID_PARAMETER	Invalid function parameter

Retains only the elements in this set that are contained in the specified range.

If start > end then an empty range is retained, leaving the set empty. This is equivalent to a boolean logic AND, or a set INTERSECTION. A frozen set will not be modified.

Since :

2.3.1

Parameters:

[in]	set	The object for which to retain only the specified range. Must not be NULL.
[in]	start	First character, inclusive, of range to be retained to this set.
[in]	end	Last character, inclusive, of range to be retained to this set.

Returns:

Error code. Error codes not listed below are described in i18n_error_code_e

Return values:

I18N_ERROR_NONE	Successful
I18N_ERROR_INVALID_PARAMETER	Invalid function parameter

Retains only the elements in this set that are contained in the specified set.

In other words, removes from this set all of its elements that are not contained in the specified set. This operation effectively modifies this set so that its value is the intersection of the two sets. A frozen set will not be modified.

Since :

2.3.1

Parameters:

[in]	set	The object on which to perform the retain. Must not be NULL.
[in]	retain	Set that defines which elements this set will retain. Must not be NULL.

Returns:

Error code. Error codes not listed below are described in i18n_error_code_e

Return values:

I18N_ERROR_NONE	Successful
I18N_ERROR_INVALID_PARAMETER	Invalid function parameter

Serializes this set into an array of 16-bit integers.

Serialization (currently) only records the characters in the set; multicharacter strings are ignored.

The array has following format (each line is one 16-bit integer):

length = (n+2*m) | (m!=0?0x8000:0) bmpLength = n; present if m!=0 bmp[0] bmp[1] ... bmp[n-1] supp-high[0] supp-low[0] supp-high[1] supp-low[1] ... supp-high[m-1] supp-low[m-1]

The array starts with a header. After the header are n bmp code points, then m supplementary code points. Either n or m or both may be zero. n+2*m is always <= 0x7FFF.

If there are no supplementary characters (if m==0) then the header is one 16-bit integer, 'length', with value n.

If there are supplementary characters (if m!=0) then the header is two 16-bit integers. The first, 'length', has value (n+2*m)|0x8000. The second, 'bmpLength', has value n.

After the header the code points are stored in ascending order. Supplementary code points are stored as most significant 16 bits followed by least significant 16 bits.

Remarks:

The specific error code can be obtained using the get_last_result() method. Error codes are described in Exceptions section and in i18n_error_code_e description.

Since :

2.3.1

Parameters:

[in]	set	the set. Must not be NULL.
[out]	dest	pointer to buffer of dest_capacity 16-bit integers May be NULL only if dest_capacity is zero.
[in]	dest_capacity	size of dest, or zero Must not be negative.

Returns:

the total length of the serialized format, including the header, that is, n+2*m+(m != 0 ? 2 : 1), or 0 on error other than I18N_ERROR_BUFFER_OVERFLOW.

Exceptions:

I18N_ERROR_NONE	Successful
I18N_ERROR_INVALID_PARAMETER	Invalid function parameter
I18N_ERROR_INDEX_OUTOFBOUNDS	If n+2*m > 0x7FFF
I18N_ERROR_BUFFER_OVERFLOW	If n+2*m+(m != 0 ? 2 : 1) > dest_capacity.

Returns true if the given i18n_userialized_set_s contains the given character.

Remarks:

The specific error code can be obtained using the get_last_result() method. Error codes are described in Exceptions section.

Since :

2.3.1

Parameters:

[in]	set	the serialized set. Must not be NULL.
[in]	character	the code point to check for within the set

Returns:

true if set contains character

Exceptions:

I18N_ERROR_NONE	Successful
I18N_ERROR_INVALID_PARAMETER	Invalid function parameter

See also:

i18n_userialized_set_s

Causes the i18n_uset_h object to represent the range start - end.

If start > end then this i18n_uset_h is set to an empty range. A frozen set will not be modified.

Since :

2.3.1

Parameters:

[in]	set	The object to set to the given range. Must not be NULL.
[in]	start	First character in the set, inclusive
[in]	end	Last character in the set, inclusive

Returns:

Error code. Error codes not listed below are described in i18n_error_code_e

Return values:

I18N_ERROR_NONE	Successful
I18N_ERROR_INVALID_PARAMETER	Invalid function parameter

Sets the i18n_userialized_set_s to contain the given character (and nothing else).

Since :

2.3.1

Parameters:

[in]	character	the code point to set
[out]	fill_set	the serialized set to be filled

Returns:

Error code.

Return values:

I18N_ERROR_NONE	Successful
I18N_ERROR_INVALID_PARAMETER	Invalid function parameter

See also:

i18n_userialized_set_s

Returns the number of characters and strings contained in the given i18n_uset_h.

Remarks:

The specific error code can be obtained using the get_last_result() method. Error codes are described in Exceptions section.

Since :

2.3.1

Parameters:

[in]

set

The set. Must not be NULL.

Returns:

A non-negative integer counting the characters and strings contained in set.

Exceptions:

I18N_ERROR_NONE	Successful
I18N_ERROR_INVALID_PARAMETER	Invalid function parameter

Returns the length of the initial substring of the input string which consists only of characters and strings that are contained in this set (I18N_USET_SPAN_CONTAINED, I18N_USET_SPAN_SIMPLE), or only of characters and strings that are not contained in this set (I18N_USET_SPAN_NOT_CONTAINED).

See i18n_uset_span_condition_e for details. Similar to the strspn() C library function. Unpaired surrogates are treated according to contains() of their surrogate code points. This function works faster with a frozen set and with a non-negative string length argument.

Remarks:

The specific error code can be obtained using the get_last_result() method. Error codes are described in Exceptions section.

Since :

2.3.1

Parameters:

[in]	set	the set. Must not be NULL.
[in]	str	start of the input string.
[in]	length	length of the string; >= 0, can be -1 for NULL-terminated
[in]	span_condition	specifies the containment condition

Returns:

The length of the initial substring according to the span_condition; 0 if the start of the string does not fit the span_condition

Exceptions:

I18N_ERROR_NONE	Successful
I18N_ERROR_INVALID_PARAMETER	Invalid function parameter

See also:

i18n_uset_span_condition_e

Returns the start of the trailing substring of the input string which consists only of characters and strings that are contained in this set (I18N_USET_SPAN_CONTAINED, I18N_USET_SPAN_SIMPLE), or only of characters and strings that are not contained in this set (I18N_USET_SPAN_NOT_CONTAINED).

See i18n_uset_span_condition_e for details. Unpaired surrogates are treated according to contains() of their surrogate code points. This function works faster with a frozen set and with a non-negative string length argument.

Remarks:

The specific error code can be obtained using the get_last_result() method. Error codes are described in Exceptions section.

Since :

2.3.1

Parameters:

[in]	set	the set. Must not be NULL.
[in]	str	start of the input string
[in]	length	length of the @ string; >= 0, can be -1 for NULL-terminated
[in]	span_condition	specifies the containment condition

Returns:

the start of the trailing substring according to the span_condition; the string length if the end of the string does not fit the span_condition

Exceptions:

I18N_ERROR_NONE	Successful
I18N_ERROR_INVALID_PARAMETER	Invalid function parameter

See also:

i18n_uset_span_condition_e

Returns the start of the trailing substring of the input string which consists only of characters and strings that are contained in this set (I18N_USET_SPAN_CONTAINED, I18N_USET_SPAN_SIMPLE), or only of characters and strings that are not contained in this set (I18N_USET_SPAN_NOT_CONTAINED).

See i18n_uset_span_condition_e for details. Malformed byte sequences are treated according to contains(0xfffd). This function works faster with a frozen set and with a non-negative string length argument.

Remarks:

The specific error code can be obtained using the get_last_result() method. Error codes are described in Exceptions section.

Since :

2.3.1

Parameters:

[in]	set	the set. Must not be NULL.
[in]	str	start of the string (UTF-8)
[in]	length	length of the string; >= 0, can be -1 for NULL-terminated
[in]	span_condition	specifies the containment condition

Returns:

the start of the trailing substring according to the span_condition; the string length if the end of the string does not fit the span_condition

Exceptions:

I18N_ERROR_NONE	Successful
I18N_ERROR_INVALID_PARAMETER	Invalid function parameter

See also:

i18n_uset_span_condition_e

Returns the length of the initial substring of the input string which consists only of characters and strings that are contained in this set (I18N_USET_SPAN_CONTAINED, I18N_USET_SPAN_SIMPLE), or only of characters and strings that are not contained in this set (I18N_USET_SPAN_NOT_CONTAINED).

See i18n_uset_span_condition_e for details. Similar to the strspn() C library function. Malformed byte sequences are treated according to contains(0xfffd). This function works faster with a frozen set and with a non-negative string length argument.

Remarks:

The specific error code can be obtained using the get_last_result() method. Error codes are described in Exceptions section.

Since :

2.3.1

Parameters:

[in]	set	the set. Must not be NULL.
[in]	str	start of the string (UTF-8)
[in]	length	length of the string; >= 0, can be -1 for NULL-terminated
[in]	span_condition	specifies the containment condition

Returns:

the length of the initial substring according to the span_condition; 0 if the start of the string does not fit the span_condition

Exceptions:

I18N_ERROR_NONE	Successful
I18N_ERROR_INVALID_PARAMETER	Invalid function parameter

See also:

i18n_uset_span_condition_e

Returns a string representation of the given set.

If the result of calling this function is passed to an i18n_uset_create_pattern(), it will produce another set that is equal to this one.

Remarks:

The specific error code can be obtained using the get_last_result() method. Error codes are described in Exceptions section and in i18n_error_code_e description.

Since :

2.3.1

Parameters:

[in]	set	The set. Must not be NULL.
[in,out]	result	The string to receive the rules, may be NULL.
[in]	result_capacity	The capacity of result, >= 0, may be 0 if result is NULL.
[in]	escape_unprintable	If true then convert unprintable character to their hex escape representations, \uxxxx or \Uxxxxxxxx. Unprintable characters are those other than U+000A, U+0020..U+007E.

Returns:

Length of string, >= 0, possibly larger than result_capacity. If set is NULL, 0 is returned.

Exceptions:

I18N_ERROR_NONE	Successful
I18N_ERROR_INVALID_PARAMETER	Invalid function parameter

See also:

i18n_uset_create_pattern()