The Player API provides functions for media playback and controlling media playback attributes.

Required Header

#include <player.h>

Overview

The Player API provides a way to play multimedia content. Content can be played from a file, from the network, or from memory. It gives the ability to start/stop/pause/mute, set the playback position (that is, seek), perform various status queries, and control the display.

Additional functions allow registering notifications via callback functions for various state change events.

This API also enables collaboration with the GUI service to present a video.

State Diagram

Playback of multimedia content is controlled by a state machine. The following diagram shows the life cycle and states of the Player.

State Transitions

FUNCTION	PRE-STATE	POST-STATE	SYNC TYPE
player_create()	NONE	IDLE	SYNC
player_destroy()	IDLE	NONE	SYNC
player_prepare()	IDLE	READY	SYNC
player_prepare_async()	IDLE	READY	ASYNC
player_unprepare()	READY, PLAYING or PAUSED	IDLE	SYNC
player_start()	READY or PAUSED	PLAYING	SYNC
player_stop()	PLAYING	READY	SYNC
player_pause()	PLAYING	PAUSED	SYNC

State Dependent Function Calls

The following table shows state-dependent function calls. It is forbidden to call the functions listed below in wrong states. Violation of this rule may result in unpredictable behavior.

FUNCTION	VALID STATES	DESCRIPTION
player_create()	ANY	-
player_destroy()	IDLE/ READY/ PLAYING/ PAUSED	This function must be called after player_create()
player_prepare()	IDLE	This function must be called after player_create()
player_unprepare()	READY/ PLAYING/ PAUSED	This function must be called after player_prepare()
player_start()	READY/ PAUSED	This function must be called after player_prepare()
player_stop()	PLAYING/ PAUSED	This function must be called after player_start() or player_pause()
player_pause()	PLAYING	This function must be called after player_start()
player_set_completed_cb() player_set_interrupted_cb() player_set_error_cb() player_set_buffering_cb() player_set_subtitle_updated_cb()	IDLE/ READY/ PLAYING/ PAUSED	This function must be called after player_create()
player_set_video_stream_changed_cb() player_set_media_stream_seek_cb() player_set_media_stream_buffer_status_cb() player_set_media_packet_video_frame_decoded_cb()	IDLE	This function must be called before player_prepare()
player_unset_completed_cb() player_unset_interrupted_cb() player_unset_error_cb() player_unset_buffering_cb() player_unset_subtitle_updated_cb() player_unset_video_stream_changed_cb() player_unset_media_stream_seek_cb() player_unset_media_stream_buffer_status_cb()	IDLE/ READY/ PLAYING/ PAUSED	This function must be called after register callback functions such as player_set_completed_cb()
player_unset_media_packet_video_frame_decoded_cb()	IDLE/ READY	This function must be called after player_set_media_packet_video_frame_decoded_cb()
player_get_state()	ANY	-
player_set_uri()	IDLE	This function must be called before player_prepare()
player_set_memory_buffer()	IDLE	This function must be called before player_prepare()
player_set_subtitle_path()	IDLE/ READY/ PLAYING/ PAUSED	This function must be called before player_create()
player_set_volume()	IDLE/ READY/ PLAYING/ PAUSED	This function must be called after player_create()
player_get_volume()	IDLE/ READY/ PLAYING/ PAUSED	This function must be called after player_create()
player_set_sound_stream_info()	IDLE	This function must be called before player_prepare()
player_set_sound_type()	IDLE	This function must be called before player_prepare()
player_set_mute()	IDLE/ READY/ PLAYING/ PAUSED	This function must be called after player_create()
player_is_muted()	IDLE/ READY/ PLAYING/ PAUSED	This function must be called after player_create()
player_set_looping()	IDLE/ READY/ PLAYING/ PAUSED	This function must be called after player_create()
player_is_looping()	IDLE/ READY/ PLAYING/ PAUSED	This function must be called after player_create()
player_get_duration()	PLAYING/ PAUSED	This function must be called after player_start()
player_set_display()	IDLE	This function must be called before player_prepare()
player_set_display_mode() player_set_display_visible()	IDLE/ READY/ PLAYING/ PAUSED	This function must be called after player_create()
player_get_display_rotation() player_is_display_visible()	IDLE/ READY/ PLAYING/ PAUSED	This function must be called after player_create()
player_get_video_size()	READY/ PLAYING/ PAUSED	This function must be called after player_prepare()
player_set_subtitle_position_offset()	PLAYING/ PAUSED	This function must be called after player_start()
player_get_current_track() player_get_track_language_code() player_get_track_count() player_select_track()	READY/ PLAYING/ PAUSED	This function must be called after player_prepare()
player_set_audio_only()	READY/ PLAYING/ PAUSED	This function must be called after player_prepare()
player_set_streaming_buffering_time()	IDLE	This function must be called before player_prepare()

Asynchronous Operations

All functions that change the player state are synchronous except player_prepare_async(), player_set_play_position(), and player_capture_video(). Thus the result is passed to the application via the callback mechanism.

Callback(Event) Operations

REGISTER	UNREGISTER	CALLBACK	DESCRIPTION
player_set_completed_cb()	player_unset_completed_cb()	player_completed_cb()	called when playback is completed
player_set_interrupted_cb()	player_unset_interrupted_cb()	player_interrupted_cb()	called when playback is interrupted by player_interrupted_code_e
player_set_error_cb()	player_unset_error_cb()	player_error_cb()	called when an error has occurred
player_set_buffering_cb()	player_unset_buffering_cb()	player_buffering_cb()	called during content buffering
player_set_progressive_download_message_cb()	player_unset_progressive_download_message_cb()	player_pd_message_cb()	called when a progressive download starts or completes
player_set_subtitle_updated_cb()	player_unset_subtitle_updated_cb()	player_subtitle_updated_cb()	called when a subtitle updates
player_set_media_packet_video_frame_decoded_cb()	player_unset_media_packet_video_frame_decoded_cb()	player_media_packet_video_decoded_cb()	called when a video frame is decoded
player_set_media_stream_seek_cb()	player_unset_media_stream_seek_cb()	player_media_stream_seek_cb()	called when seeking is occurred during playback with external media buffer
player_set_media_stream_buffer_status_cb()	player_unset_media_stream_buffer_status_cb()	player_media_stream_buffer_status_cb()	called when the buffer underrun or overflow is detected during playback with external media buffer
player_set_video_stream_changed_cb()	player_unset_video_stream_changed_cb()	player_video_stream_changed_cb()	called when the video stream info is changed

Functions
int	player_create (player_h *player)
	Creates a player handle for playing multimedia content.
int	player_destroy (player_h player)
	Destroys the media player handle and releases all its resources.
int	player_prepare (player_h player)
	Prepares the media player for playback.
int	player_prepare_async (player_h player, player_prepared_cb callback, void *user_data)
	Prepares the media player for playback, asynchronously.
int	player_unprepare (player_h player)
	Resets the media player.
int	player_set_uri (player_h player, const char *uri)
	Sets the data source (file-path, HTTP or RTSP URI) to use.
int	player_set_memory_buffer (player_h player, const void *data, int size)
	Sets memory as the data source.
int	player_get_state (player_h player, player_state_e *state)
	Gets the player's current state.
int	player_set_volume (player_h player, float left, float right)
	Sets the player's volume.
int	player_get_volume (player_h player, float left, float right)
	Gets the player's current volume factor.
int	player_set_sound_type (player_h player, sound_type_e type) TIZEN_DEPRECATED_API
	Sets the player's volume type.
int	player_set_sound_stream_info (player_h player, sound_stream_info_h stream_info)
	Sets the player's sound manager stream information.
int	player_set_audio_latency_mode (player_h player, audio_latency_mode_e latency_mode)
	Sets the audio latency mode.
int	player_get_audio_latency_mode (player_h player, audio_latency_mode_e *latency_mode)
	Gets the current audio latency mode.
int	player_start (player_h player)
	Starts or resumes playback.
int	player_stop (player_h player)
	Stops playing media content.
int	player_pause (player_h player)
	Pauses the player.
int	player_set_play_position (player_h player, int millisecond, bool accurate, player_seek_completed_cb callback, void *user_data)
	Sets the seek position for playback, asynchronously.
int	player_get_play_position (player_h player, int *millisecond)
	Gets the current position in milliseconds.
int	player_set_mute (player_h player, bool muted)
	Sets the player's mute status.
int	player_is_muted (player_h player, bool *muted)
	Gets the player's mute status.
int	player_set_looping (player_h player, bool looping)
	Sets the player's looping status.
int	player_is_looping (player_h player, bool *looping)
	Gets the player's looping status.
int	player_set_display (player_h player, player_display_type_e type, player_display_h display)
	Sets the video display.
int	player_set_media_packet_video_frame_decoded_cb (player_h player, player_media_packet_video_decoded_cb callback, void *user_data)
	Sets a media packet video callback function to be called once per frame.
int	player_unset_media_packet_video_frame_decoded_cb (player_h player)
	Unsets the media packet video frame callback function.
int	player_push_media_stream (player_h player, media_packet_h packet)
	Pushes elementary stream to decode audio or video.
int	player_set_media_stream_info (player_h player, player_stream_type_e type, media_format_h format)
	Sets contents information for media stream.
int	player_set_media_stream_buffer_status_cb (player_h player, player_stream_type_e type, player_media_stream_buffer_status_cb callback, void *user_data)
	Sets a callback function to be invoked when buffer underrun or overflow is occurred.
int	player_unset_media_stream_buffer_status_cb (player_h player, player_stream_type_e type)
	Unsets the buffer status callback function.
int	player_set_media_stream_seek_cb (player_h player, player_stream_type_e type, player_media_stream_seek_cb callback, void *user_data)
	Sets a callback function to be invoked when seeking is occurred.
int	player_unset_media_stream_seek_cb (player_h player, player_stream_type_e type)
	Unsets the seek callback function.
int	player_set_media_stream_buffer_max_size (player_h player, player_stream_type_e type, unsigned long long max_size)
	Sets the max size bytes of buffer.
int	player_get_media_stream_buffer_max_size (player_h player, player_stream_type_e type, unsigned long long *max_size)
	Gets the max size bytes of buffer.
int	player_set_media_stream_buffer_min_threshold (player_h player, player_stream_type_e type, unsigned int percent)
	Sets the buffer threshold percent of buffer.
int	player_get_media_stream_buffer_min_threshold (player_h player, player_stream_type_e type, unsigned int *percent)
	Gets the buffer threshold percent of buffer.
int	player_capture_video (player_h player, player_video_captured_cb callback, void *user_data)
	Captures the video frame, asynchronously.
int	player_set_streaming_cookie (player_h player, const char *cookie, int size)
	Sets the cookie for streaming playback.
int	player_set_streaming_user_agent (player_h player, const char *user_agent, int size)
	Sets the streaming user agent for playback.
int	player_get_streaming_download_progress (player_h player, int start, int current)
	Gets the download progress for streaming playback.
int	player_set_completed_cb (player_h player, player_completed_cb callback, void *user_data)
	Sets a callback function to be invoked when the playback is finished.
int	player_unset_completed_cb (player_h player)
	Unsets the playback completed callback function.
int	player_set_interrupted_cb (player_h player, player_interrupted_cb callback, void *user_data)
	Sets a callback function to be invoked when the playback is interrupted or the interrupt is completed.
int	player_unset_interrupted_cb (player_h player)
	Unsets the interrupted callback function.
int	player_set_error_cb (player_h player, player_error_cb callback, void *user_data)
	Sets a callback function to be invoked when an error occurs.
int	player_unset_error_cb (player_h player)
	Unsets the error callback function.
int	player_set_buffering_cb (player_h player, player_buffering_cb callback, void *user_data)
	Sets a callback function to be invoked when there is a change in the buffering status of a media stream.
int	player_unset_buffering_cb (player_h player)
	Unsets the buffering callback function.
int	player_set_progressive_download_path (player_h player, const char *path) TIZEN_DEPRECATED_API
	Sets a path to download, progressively.
int	player_get_progressive_download_status (player_h player, unsigned long current, unsigned long total_size) TIZEN_DEPRECATED_API
	Gets the status of progressive download.
int	player_set_progressive_download_message_cb (player_h player, player_pd_message_cb callback, void *user_data) TIZEN_DEPRECATED_API
	Sets a callback function to be invoked when progressive download is started or completed.
int	player_unset_progressive_download_message_cb (player_h player) TIZEN_DEPRECATED_API
	Unsets the progressive download message callback function.
int	player_set_playback_rate (player_h player, float rate)
	Sets the playback rate.
int	player_get_current_track (player_h player, player_stream_type_e type, int *index)
	Gets current track index.
int	player_get_track_language_code (player_h player, player_stream_type_e type, int index, char **code)
	Gets language code of a track.
int	player_get_track_count (player_h player, player_stream_type_e type, int *count)
	Gets the track count.
int	player_select_track (player_h player, player_stream_type_e type, int index)
	Selects a track to play.
int	player_foreach_adaptive_variant (player_h player, player_adaptive_variant_cb callback, void *user_data)
	Retrieves all the streaming variant information.
int	player_set_max_adaptive_variant_limit (player_h player, int bandwidth, int width, int height)
	Sets the maximum limit of the streaming variant.
int	player_get_max_adaptive_variant_limit (player_h player, int bandwidth, int width, int *height)
	Gets the maximum limit of the streaming variant.
int	player_set_audio_only (player_h player, bool audio_only)
	Sets the audio only mode.
int	player_is_audio_only (player_h player, bool *audio_only)
	Gets the audio only mode status.
int	player_set_streaming_buffering_time (player_h player, int prebuffer_ms, int rebuffer_ms)
	Sets the streaming buffering time.
int	player_get_streaming_buffering_time (player_h player, int prebuffer_ms, int rebuffer_ms)
	Gets the streaming buffering time.
Typedefs
typedef struct player_s *	player_h
	The media player's type handle.
typedef void(*	player_prepared_cb )(void *user_data)
	Called when the media player is prepared.
typedef void(*	player_completed_cb )(void *user_data)
	Called when the media player is completed.
typedef void(*	player_seek_completed_cb )(void *user_data)
	Called when the seek operation is completed.
typedef void(*	player_interrupted_cb )(player_interrupted_code_e code, void *user_data)
	Called when the media player is interrupted.
typedef void(*	player_error_cb )(int error_code, void *user_data)
	Called when an error occurs in the media player.
typedef void(*	player_buffering_cb )(int percent, void *user_data)
	Called when the buffering percentage of the media playback is updated.
typedef void(*	player_pd_message_cb )(player_pd_message_type_e type, void *user_data)
	Called when progressive download is started or completed.
typedef void(*	player_video_captured_cb )(unsigned char captured_data, int width, int height, unsigned int size, void user_data)
	Called when the video is captured.
typedef void(*	player_media_packet_video_decoded_cb )(media_packet_h packet, void *user_data)
	Called to register for notifications about delivering media packet when every video frame is decoded.
typedef void(*	player_media_stream_buffer_status_cb )(player_media_stream_buffer_status_e status, void *user_data)
	Called when the buffer level drops below the threshold of max size or no free space in buffer.
typedef void(*	player_media_stream_seek_cb )(unsigned long long offset, void *user_data)
	Called to notify the next push-buffer offset when seeking is occurred.
typedef void(*	player_adaptive_variant_cb )(int bandwidth, int width, int height, void *user_data)
	Called to notify the streaming variant information.

Typedef Documentation

typedef void(* player_adaptive_variant_cb)(int bandwidth, int width, int height, void *user_data)

Called to notify the streaming variant information.

The adaptive streaming protocol(hls, mpeg dash) can support variant stream condition. All the streaming variant information can be shared by calling player_foreach_adaptive_variant().

Since :: 4.0

Parameters:

[in]	bandwidth	The bandwidth of the stream can be supportable, this is mandatory parameter
[in]	width	The width of the stream, this is optional parameter
[in]	height	The height of the stream, this is optional parameter
[in]	user_data	The user data passed from the callback registration function

See also:: player_foreach_adaptive_variant()

typedef void(* player_buffering_cb)(int percent, void *user_data)

Called when the buffering percentage of the media playback is updated.

If the buffer is full, it will return 100%.

Since :: 2.3

Parameters:

[in]	percent	The percentage of buffering completed (0~100)
[in]	user_data	The user data passed from the callback registration function

See also:: player_set_buffering_cb(); player_unset_buffering_cb()

typedef void(* player_completed_cb)(void *user_data)

Called when the media player is completed.

It will be invoked when player has reached the end of the stream.

Since :: 2.3

Parameters:

[in] user_data The user data passed from the callback registration function

Precondition:: It will be invoked when the playback is completed if you register this callback using player_set_completed_cb().

See also:: player_set_completed_cb(); player_unset_completed_cb()

typedef void(* player_error_cb)(int error_code, void *user_data)

Called when an error occurs in the media player.

Following error codes can be delivered. PLAYER_ERROR_INVALID_OPERATION PLAYER_ERROR_INVALID_STATE PLAYER_ERROR_INVALID_URI PLAYER_ERROR_CONNECTION_FAILED PLAYER_ERROR_DRM_NOT_PERMITTED PLAYER_ERROR_FILE_NO_SPACE_ON_DEVICE PLAYER_ERROR_NOT_SUPPORTED_FILE PLAYER_ERROR_SEEK_FAILED PLAYER_ERROR_SERVICE_DISCONNECTED PLAYER_ERROR_NOT_SUPPORTED_AUDIO_CODEC (Since 4.0) PLAYER_ERROR_NOT_SUPPORTED_VIDEO_CODEC (Since 4.0) PLAYER_ERROR_NOT_SUPPORTED_SUBTITLE (Since 4.0)

Since :: 2.3

Parameters:

[in]	error_code	The error code
[in]	user_data	The user data passed from the callback registration function

See also:: player_set_error_cb(); player_unset_error_cb()

typedef struct player_s* player_h

The media player's type handle.

Since :: 2.3

typedef void(* player_interrupted_cb)(player_interrupted_code_e code, void *user_data)

Called when the media player is interrupted.

If the code is PLAYER_INTERRUPTED_BY_RESOURCE_CONFLICT, the player state will be one of PLAYER_STATE_IDLE, PLAYER_STATE_READY, or PLAYER_STATE_PAUSED. Application should get exact state by calling player_get_state().

Since :: 2.3

Parameters:

[in]	code	The interrupted error code
[in]	user_data	The user data passed from the callback registration function

See also:: player_set_interrupted_cb(); player_unset_interrupted_cb(); player_get_state()

typedef void(* player_media_packet_video_decoded_cb)(media_packet_h packet, void *user_data)

Called to register for notifications about delivering media packet when every video frame is decoded.

Since :: 2.3

Remarks:: The UI update code must not be directly invoked.; The packet should be released using media_packet_destroy().
If not, the decoder will fail due to having insufficient buffer space for the decoded frame.

Parameters:

[in]	packet	Reference pointer to the media packet
[in]	user_data	The user data passed from the callback registration function

typedef void(* player_media_stream_buffer_status_cb)(player_media_stream_buffer_status_e status, void *user_data)

Called when the buffer level drops below the threshold of max size or no free space in buffer.

Since :: 2.4

Remarks:: This function is used for media stream playback only.

Parameters:

[in]	status	The buffer status
[in]	user_data	The user data passed from the callback registration function

See also:: player_set_media_stream_buffer_status_cb(); player_set_media_stream_buffer_max_size(); player_set_media_stream_buffer_min_threshold()

typedef void(* player_media_stream_seek_cb)(unsigned long long offset, void *user_data)

Called to notify the next push-buffer offset when seeking is occurred.

The next push-buffer should produce buffers from the new offset.

Since :: 2.4

Remarks:: This function is used for media stream playback only.

Parameters:

[in]	offset	The new byte position to seek
[in]	user_data	The user data passed from the callback registration function

typedef void(* player_pd_message_cb)(player_pd_message_type_e type, void *user_data)

Called when progressive download is started or completed.

Since :: 2.3

Parameters:

[in]	type	The message type for progressive download
[in]	user_data	The user data passed from the callback registration function

See also:: player_set_progressive_download_path()

typedef void(* player_prepared_cb)(void *user_data)

Called when the media player is prepared.

It will be invoked when player has reached the begin of stream.

Since :: 2.3

Parameters:

[in] user_data The user data passed from the callback registration function

Precondition:: player_prepare_async() will cause this callback.

Postcondition:: The player state will be PLAYER_STATE_READY.

See also:: player_prepare_async()

typedef void(* player_seek_completed_cb)(void *user_data)

Called when the seek operation is completed.

Since :: 2.3

Parameters:

[in] user_data The user data passed from the callback registration function

See also:: player_set_play_position()

typedef void(* player_video_captured_cb)(unsigned char *captured_data, int width, int height, unsigned int size, void *user_data)

Called when the video is captured.

Since :: 2.3

Remarks:: The color space format of the captured image is IMAGE_UTIL_COLORSPACE_RGB888.; The captured_data should not be released and it can be used only in the callback. To use outside, make a copy.

Parameters:

[in]	captured_data	The captured image buffer
[in]	width	The width of the captured image
[in]	height	The height of the captured image
[in]	size	The size of the captured image
[in]	user_data	The user data passed from the callback registration function

See also:: player_capture_video()

Enumeration Type Documentation

enum audio_latency_mode_e

Enumeration for audio latency mode.

Since :: 2.3

Enumerator:

AUDIO_LATENCY_MODE_LOW	Low audio latency mode
AUDIO_LATENCY_MODE_MID	Middle audio latency mode
AUDIO_LATENCY_MODE_HIGH	High audio latency mode

enum player_display_type_e

Enumeration for display type.

Since :: 2.3

Enumerator:

PLAYER_DISPLAY_TYPE_OVERLAY	Overlay surface display
PLAYER_DISPLAY_TYPE_OBSOLETE_EVAS_WNONE	Obsolete. Acts as PLAYER_DISPLAY_TYPE_NONE on Wearable, PLAYER_DISPLAY_TYPE_EVAS in all other cases. This symbol was added for backward compatibility reasons. It should not be used. (Deprecated since 4.0)
PLAYER_DISPLAY_TYPE_OBSOLETE_NONE_WEVAS	Obsolete. Acts as PLAYER_DISPLAY_TYPE_EVAS on Wearable 3.0 and later, PLAYER_DISPLAY_TYPE_NONE in all other cases. This symbol was added for backward compatibility reasons. It should not be used. (Deprecated since 4.0)
PLAYER_DISPLAY_TYPE_EVAS	Evas image object surface display (Since 4.0)
PLAYER_DISPLAY_TYPE_NONE	This disposes of buffers (Since 4.0)

enum player_error_e

Enumeration for media player's error codes.

Since :: 2.3

Enumerator:

PLAYER_ERROR_NONE	Successful
PLAYER_ERROR_OUT_OF_MEMORY	Out of memory
PLAYER_ERROR_INVALID_PARAMETER	Invalid parameter
PLAYER_ERROR_NO_SUCH_FILE	No such file or directory
PLAYER_ERROR_INVALID_OPERATION	Invalid operation
PLAYER_ERROR_FILE_NO_SPACE_ON_DEVICE	No space left on the device
PLAYER_ERROR_FEATURE_NOT_SUPPORTED_ON_DEVICE	Not supported Feature
PLAYER_ERROR_SEEK_FAILED	Seek operation failure
PLAYER_ERROR_INVALID_STATE	Invalid state
PLAYER_ERROR_NOT_SUPPORTED_FILE	File format not supported
PLAYER_ERROR_INVALID_URI	Invalid URI
PLAYER_ERROR_SOUND_POLICY	Sound policy error
PLAYER_ERROR_CONNECTION_FAILED	Streaming connection failed
PLAYER_ERROR_VIDEO_CAPTURE_FAILED	Video capture failed
PLAYER_ERROR_DRM_EXPIRED	Expired license
PLAYER_ERROR_DRM_NO_LICENSE	No license
PLAYER_ERROR_DRM_FUTURE_USE	License for future use
PLAYER_ERROR_DRM_NOT_PERMITTED	Format not permitted
PLAYER_ERROR_RESOURCE_LIMIT	Resource limit
PLAYER_ERROR_PERMISSION_DENIED	Permission denied
PLAYER_ERROR_SERVICE_DISCONNECTED	Socket connection lost (Since 3.0)
PLAYER_ERROR_BUFFER_SPACE	No buffer space available (Since 3.0)
PLAYER_ERROR_NOT_SUPPORTED_AUDIO_CODEC	Not supported audio codec but video can be played (Since 4.0)
PLAYER_ERROR_NOT_SUPPORTED_VIDEO_CODEC	Not supported video codec but audio can be played (Since 4.0)
PLAYER_ERROR_NOT_SUPPORTED_SUBTITLE	Not supported subtitle format (Since 4.0)

enum player_interrupted_code_e

Enumeration for media player's interruption type.

Since :: 2.3

Enumerator:

PLAYER_INTERRUPTED_COMPLETED	Interrupt completed (Deprecated since 3.0)
PLAYER_INTERRUPTED_BY_MEDIA	Interrupted by a non-resumable media application (Deprecated since 3.0)
PLAYER_INTERRUPTED_BY_CALL	Interrupted by an incoming call (Deprecated since 3.0)
PLAYER_INTERRUPTED_BY_EARJACK_UNPLUG	Interrupted by unplugging headphones (Deprecated since 3.0)
PLAYER_INTERRUPTED_BY_RESOURCE_CONFLICT	Interrupted by a resource conflict and the player handle will be paused or unprepared
PLAYER_INTERRUPTED_BY_ALARM	Interrupted by an alarm (Deprecated since 3.0)
PLAYER_INTERRUPTED_BY_EMERGENCY	Interrupted by an emergency (Deprecated since 3.0)
PLAYER_INTERRUPTED_BY_NOTIFICATION	Interrupted by a notification (Deprecated since 3.0)

enum player_media_stream_buffer_status_e

Enumeration of media stream buffer status.

Since :: 2.4

See also:: player_set_media_stream_buffer_max_size(); player_set_media_stream_buffer_min_threshold()

Enumerator:

PLAYER_MEDIA_STREAM_BUFFER_UNDERRUN	The buffer level is lower than the threshold
PLAYER_MEDIA_STREAM_BUFFER_OVERFLOW	The buffer level is over than the threshold

enum player_pd_message_type_e

Enumeration for progressive download message type.

Since :: 2.3

Enumerator:

PLAYER_PD_STARTED	Progressive download is started
PLAYER_PD_COMPLETED	Progressive download is completed

enum player_state_e

Enumeration for media player state.

Since :: 2.3

Enumerator:

PLAYER_STATE_NONE	Player is not created
PLAYER_STATE_IDLE	Player is created, but not prepared
PLAYER_STATE_READY	Player is ready to play media
PLAYER_STATE_PLAYING	Player is playing media
PLAYER_STATE_PAUSED	Player is paused while playing media

enum player_stream_type_e

Enumeration for stream type.

Since :: 2.4

Enumerator:

PLAYER_STREAM_TYPE_DEFAULT	Container type
PLAYER_STREAM_TYPE_AUDIO	Audio element stream type
PLAYER_STREAM_TYPE_VIDEO	Video element stream type
PLAYER_STREAM_TYPE_TEXT	Text type

Function Documentation

int player_capture_video	(	player_h	player,
		player_video_captured_cb	callback,
		void *	user_data
	)

Captures the video frame, asynchronously.

Since :: 2.3

Parameters:

[in]	player	The handle to the media player
[in]	callback	The callback function to register
[in]	user_data	The user data to be passed to the callback function

Returns:: 0 on success, otherwise a negative error value

Return values:

PLAYER_ERROR_NONE	Successful
PLAYER_ERROR_INVALID_PARAMETER	Invalid parameter
PLAYER_ERROR_INVALID_OPERATION	Invalid operation
PLAYER_ERROR_INVALID_STATE	Invalid player state

Precondition:: The player state must be set to PLAYER_STATE_PLAYING by calling player_start() or set to PLAYER_STATE_PAUSED by calling player_pause().; Video display type should be set by calling player_set_display() otherwise, audio stream is only processed even though video file is set.

Postcondition:: It invokes player_video_captured_cb() when capture completes, if you set a callback.

See also:: player_video_captured_cb()

int player_create ( player_h * player )

Creates a player handle for playing multimedia content.

Since :: 2.3

Remarks:: You must release player by using player_destroy().
Although you can create multiple player handles at the same time, the player cannot guarantee proper operation because of limited resources, such as audio or display device.

Parameters:

[out] player A new handle to the media player

Returns:: 0 on success, otherwise a negative error value

Return values:

PLAYER_ERROR_NONE	Successful
PLAYER_ERROR_INVALID_PARAMETER	Invalid parameter
PLAYER_ERROR_OUT_OF_MEMORY	Out of memory
PLAYER_ERROR_INVALID_OPERATION	Invalid operation
PLAYER_ERROR_RESOURCE_LIMIT	Cannot create more instance due to resource(socket, thread, etc) limitation on system.

Postcondition:: The player state will be PLAYER_STATE_IDLE.

See also:: player_destroy()

int player_destroy ( player_h player )

Destroys the media player handle and releases all its resources.

Since :: 2.3

Remarks:: To completely shutdown player operation, call this function with a valid player handle from any player state.

Parameters:

[in] player The handle to the media player to be destroyed

Returns:: 0 on success, otherwise a negative error value

Return values:

PLAYER_ERROR_NONE	Successful
PLAYER_ERROR_INVALID_PARAMETER	Invalid parameter
PLAYER_ERROR_INVALID_OPERATION	Invalid operation

Precondition:: The player state must be one of PLAYER_STATE_IDLE, PLAYER_STATE_READY, PLAYER_STATE_PLAYING, or PLAYER_STATE_PAUSED.

Postcondition:: The player state will be PLAYER_STATE_NONE.

See also:: player_create()

int player_foreach_adaptive_variant	(	player_h	player,
		player_adaptive_variant_cb	callback,
		void *	user_data
	)

Retrieves all the streaming variant information.

Since :: 4.0

Remarks:: This function is used for adaptive streaming(hls/mpeg dash) only.

Parameters:

[in]	player	The handle to the media player
[in]	callback	The iteration callback function
[in]	user_data	The user data to be passed to the callback function

Returns:: 0 on success, otherwise a negative error value

Return values:

PLAYER_ERROR_NONE	Successful
PLAYER_ERROR_INVALID_PARAMETER	Invalid parameter
PLAYER_ERROR_INVALID_OPERATION	Invalid operation
PLAYER_ERROR_INVALID_STATE	Invalid player state

Precondition:: The player state must be one of PLAYER_STATE_READY, PLAYER_STATE_PLAYING, or PLAYER_STATE_PAUSED

See also:: player_adaptive_variant_cb

int player_get_audio_latency_mode	(	player_h	player,
		audio_latency_mode_e *	latency_mode
	)

Gets the current audio latency mode.

Since :: 2.3

Parameters:

[in]	player	The handle to the media player
[out]	latency_mode	The latency mode to get from the audio

Returns:: 0 on success, otherwise a negative error value

Return values:

PLAYER_ERROR_NONE	Successful
PLAYER_ERROR_INVALID_PARAMETER	Invalid parameter
PLAYER_ERROR_INVALID_OPERATION	Invalid operation

See also:: audio_latency_mode_e; player_set_audio_latency_mode()

int player_get_current_track	(	player_h	player,
		player_stream_type_e	type,
		int *	index
	)

Gets current track index.

Index starts from 0.

Since :: 2.4

Parameters:

[in]	player	The handle to the media player
[in]	type	The type of target stream which is PLAYER_STREAM_TYPE_AUDIO or PLAYER_STREAM_TYPE_TEXT
[out]	index	The index of track

Returns:: 0 on success, otherwise a negative error value

Return values:

PLAYER_ERROR_NONE	Successful
PLAYER_ERROR_INVALID_PARAMETER	Invalid parameter
PLAYER_ERROR_INVALID_OPERATION	Invalid operation
PLAYER_ERROR_INVALID_STATE	Invalid player state

Precondition:: The player state must be one of PLAYER_STATE_READY, PLAYER_STATE_PLAYING, or PLAYER_STATE_PAUSED

int player_get_max_adaptive_variant_limit	(	player_h	player,
		int *	bandwidth,
		int *	width,
		int *	height
	)

Gets the maximum limit of the streaming variant.

Since :: 4.0

Remarks:: This function is used for adaptive streaming(hls/mpeg dash) only.

Parameters:

[in]	player	The handle to the media player
[out]	bandwidth	The max bandwidth limit of the stream variant (default: -1)
[out]	width	The max width limit of the stream variant (deafult: -1)
[out]	height	The max height limit of the stream variant (deafult: -1)

Returns:: 0 on success, otherwise a negative error value

Return values:

PLAYER_ERROR_NONE	Successful
PLAYER_ERROR_INVALID_PARAMETER	Invalid parameter
PLAYER_ERROR_INVALID_OPERATION	Invalid operation

Precondition:: The player state must be one of PLAYER_STATE_IDLE, PLAYER_STATE_READY, PLAYER_STATE_PLAYING, or PLAYER_STATE_PAUSED.

See also:: player_foreach_adaptive_variant(); player_set_max_adaptive_variant_limit()

int player_get_media_stream_buffer_max_size	(	player_h	player,
		player_stream_type_e	type,
		unsigned long long *	max_size
	)

Gets the max size bytes of buffer.

Since :: 2.4

Remarks:: This function is used for media stream playback only.; If the buffer level over the max size, player_media_stream_buffer_status_cb() will be invoked with overflow status.

Parameters:

[in]	player	The handle to the media player
[in]	type	The type of target stream
[out]	max_size	The max bytes of buffer

Returns:: 0 on success, otherwise a negative error value

Return values:

PLAYER_ERROR_NONE	Successful
PLAYER_ERROR_INVALID_PARAMETER	Invalid parameter
PLAYER_ERROR_INVALID_STATE	Invalid player state

Precondition:: The player state must be one of PLAYER_STATE_IDLE, PLAYER_STATE_READY, PLAYER_STATE_PLAYING, or PLAYER_STATE_PAUSED.

See also:: player_set_media_stream_buffer_max_size(); player_media_stream_buffer_status_cb()

int player_get_media_stream_buffer_min_threshold	(	player_h	player,
		player_stream_type_e	type,
		unsigned int *	percent
	)

Gets the buffer threshold percent of buffer.

Since :: 2.4

Remarks:: This function is used for media stream playback only.; If the buffer level drops below the percent value, player_media_stream_buffer_status_cb() will be invoked with underrun status.

Parameters:

[in]	player	The handle to the media player
[in]	type	The type of target stream
[out]	percent	The minimum threshold(0~100) of buffer

Returns:: 0 on success, otherwise a negative error value

Return values:

PLAYER_ERROR_NONE	Successful
PLAYER_ERROR_INVALID_PARAMETER	Invalid parameter
PLAYER_ERROR_INVALID_STATE	Invalid player state

Precondition:: The player state must be one of PLAYER_STATE_IDLE, PLAYER_STATE_READY, PLAYER_STATE_PLAYING, or PLAYER_STATE_PAUSED.

See also:: player_set_media_stream_buffer_min_threshold(); player_media_stream_buffer_status_cb()

int player_get_play_position	(	player_h	player,
		int *	millisecond
	)

Gets the current position in milliseconds.

Since :: 2.3

Parameters:

[in]	player	The handle to the media player
[out]	millisecond	The current position in milliseconds

Returns:: 0 on success, otherwise a negative error value

Return values:

PLAYER_ERROR_NONE	Successful
PLAYER_ERROR_INVALID_STATE	Invalid player state
PLAYER_ERROR_INVALID_PARAMETER	Invalid parameter
PLAYER_ERROR_INVALID_OPERATION	Invalid operation
PLAYER_ERROR_SEEK_FAILED	Seek operation failure

Precondition:: The player state must be one of PLAYER_STATE_IDLE, PLAYER_STATE_READY, PLAYER_STATE_PLAYING, or PLAYER_STATE_PAUSED.

See also:: player_set_play_position()

int player_get_progressive_download_status	(	player_h	player,
		unsigned long *	current,
		unsigned long *	total_size
	)

Gets the status of progressive download.

Deprecated:: Deprecated since 4.0.

Since :: 2.3

Parameters:

[in]	player	The handle to the media player
[out]	current	The current download position (bytes)
[out]	total_size	The total size of the file (bytes)

Returns:: 0 on success, otherwise a negative error value

Return values:

PLAYER_ERROR_NONE	Successful
PLAYER_ERROR_INVALID_PARAMETER	Invalid parameter
PLAYER_ERROR_INVALID_OPERATION	Invalid operation
PLAYER_ERROR_INVALID_STATE	Invalid player state

Precondition:: The progressive download path must be set by calling player_set_progressive_download_path().; The player state must be set to PLAYER_STATE_PLAYING by calling player_start() or set to PLAYER_STATE_PAUSED by calling player_pause().

int player_get_state	(	player_h	player,
		player_state_e *	state
	)

Gets the player's current state.

Since :: 2.3

Parameters:

[in]	player	The handle to the media player
[out]	state	The current state of the player

Returns:: 0 on success, otherwise a negative error value

Return values:

PLAYER_ERROR_NONE	Successful
PLAYER_ERROR_INVALID_PARAMETER	Invalid parameter

See also:: player_state_e

int player_get_streaming_buffering_time	(	player_h	player,
		int *	prebuffer_ms,
		int *	rebuffer_ms
	)

Gets the streaming buffering time.

Since :: 4.0

Parameters:

[in]	player	The handle to the media player
[in]	prebuffer_ms	The buffer time to start playback
[in]	rebuffer_ms	The buffer time during playback if player enter pause state for buffering.

Returns:: 0 on success, otherwise a negative error value

Return values:

PLAYER_ERROR_NONE	Successful
PLAYER_ERROR_INVALID_PARAMETER	Invalid parameter
PLAYER_ERROR_INVALID_STATE	Invalid state

Precondition:: The player state must be one of PLAYER_STATE_IDLE, PLAYER_STATE_READY, PLAYER_STATE_PLAYING, or PLAYER_STATE_PAUSED.

See also:: player_set_streaming_buffering_time()

int player_get_streaming_download_progress	(	player_h	player,
		int *	start,
		int *	current
	)

Gets the download progress for streaming playback.

Since :: 2.3

Parameters:

[in]	player	The handle to the media player
[out]	start	The starting position in percentage [0, 100]
[out]	current	The current position in percentage [0, 100]

Returns:: 0 on success, otherwise a negative error value

Return values:

PLAYER_ERROR_NONE	Successful
PLAYER_ERROR_INVALID_PARAMETER	Invalid parameter
PLAYER_ERROR_INVALID_OPERATION	Invalid operation
PLAYER_ERROR_INVALID_STATE	Invalid player state

Precondition:: The player state must be set to PLAYER_STATE_PLAYING by calling player_start() or set to PLAYER_STATE_PAUSED by calling player_pause().

int player_get_track_count	(	player_h	player,
		player_stream_type_e	type,
		int *	count
	)

Gets the track count.

Since :: 2.4

Parameters:

[in]	player	The handle to the media player
[in]	type	The type of target stream which is PLAYER_STREAM_TYPE_AUDIO or PLAYER_STREAM_TYPE_TEXT
[out]	count	The number of track

Returns:: 0 on success, otherwise a negative error value

Return values:

PLAYER_ERROR_NONE	Successful
PLAYER_ERROR_INVALID_PARAMETER	Invalid parameter
PLAYER_ERROR_INVALID_OPERATION	Invalid operation
PLAYER_ERROR_INVALID_STATE	Invalid player state

Precondition:: The player state must be one of PLAYER_STATE_READY, PLAYER_STATE_PLAYING, or PLAYER_STATE_PAUSED

int player_get_track_language_code	(	player_h	player,
		player_stream_type_e	type,
		int	index,
		char **	code
	)

Gets language code of a track.

Since :: 2.4

Remarks:: code must be released with free() by caller

Parameters:

[in]	player	The handle to the media player
[in]	type	The type of target stream which is PLAYER_STREAM_TYPE_AUDIO or PLAYER_STREAM_TYPE_TEXT
[in]	index	The index of track
[out]	code	A language code in ISO 639-1. "und" will be returned if the language is undefined.

Returns:: 0 on success, otherwise a negative error value

Return values:

PLAYER_ERROR_NONE	Successful
PLAYER_ERROR_INVALID_PARAMETER	Invalid parameter
PLAYER_ERROR_INVALID_OPERATION	Invalid operation
PLAYER_ERROR_INVALID_STATE	Invalid player state

Precondition:: The player state must be one of PLAYER_STATE_READY, PLAYER_STATE_PLAYING, or PLAYER_STATE_PAUSED

int player_get_volume	(	player_h	player,
		float *	left,
		float *	right
	)

Gets the player's current volume factor.

The range of left and right is from 0 to 1.0, inclusive (1.0 = 100%). This function gets the player volume, not the system volume. To get the system volume, use the Sound Manager API.

Since :: 2.3

Parameters:

[in]	player	The handle to the media player
[out]	left	The current left volume scalar
[out]	right	The current right volume scalar

Returns:: 0 on success, otherwise a negative error value

Return values:

PLAYER_ERROR_NONE	Successful
PLAYER_ERROR_INVALID_PARAMETER	Invalid parameter
PLAYER_ERROR_INVALID_OPERATION	Invalid operation

See also:: player_set_volume()

int player_is_audio_only	(	player_h	player,
		bool *	audio_only
	)

Gets the audio only mode status.

Since :: 4.0

Parameters:

[in]	player	The handle to the media player
[out]	audio_only	The current audio only status: (`true` = audio only enabled, `false` = audio only disabled)

Returns:: 0 on success, otherwise a negative error value

Return values:

PLAYER_ERROR_NONE	Successful
PLAYER_ERROR_INVALID_PARAMETER	Invalid parameter
PLAYER_ERROR_INVALID_OPERATION	Invalid operation

Precondition:: The player state must be one of: PLAYER_STATE_IDLE, PLAYER_STATE_READY, PLAYER_STATE_PLAYING, or PLAYER_STATE_PAUSED.

See also:: player_set_audio_only()

int player_is_looping	(	player_h	player,
		bool *	looping
	)

Gets the player's looping status.

If the looping status is true, playback automatically restarts upon finishing. If it is false, it won't.

Since :: 2.3

Parameters:

[in]	player	The handle to the media player
[out]	looping	The looping status: (`true` = looping, `false` = non-looping )

Returns:: 0 on success, otherwise a negative error value

Return values:

PLAYER_ERROR_NONE	Successful
PLAYER_ERROR_INVALID_PARAMETER	Invalid parameter
PLAYER_ERROR_INVALID_OPERATION	Invalid operation
PLAYER_ERROR_INVALID_STATE	Invalid player state

Precondition:: The player state must be one of PLAYER_STATE_IDLE, PLAYER_STATE_READY, PLAYER_STATE_PLAYING, or PLAYER_STATE_PAUSED.

See also:: player_set_looping()

int player_is_muted	(	player_h	player,
		bool *	muted
	)

Gets the player's mute status.

If the mute status is true, no sounds are played. If it is false, sounds are played at the previously set volume level.

Since :: 2.3

Parameters:

[in]	player	The handle to the media player
[out]	muted	The current mute status: (`true` = mute, `false` = not muted)

Returns:: 0 on success, otherwise a negative error value

Return values:

PLAYER_ERROR_NONE	Successful
PLAYER_ERROR_INVALID_PARAMETER	Invalid parameter
PLAYER_ERROR_INVALID_OPERATION	Invalid operation

Precondition:: The player state must be one of PLAYER_STATE_IDLE, PLAYER_STATE_READY, PLAYER_STATE_PLAYING, or PLAYER_STATE_PAUSED.

See also:: player_set_mute()

int player_pause ( player_h player )

Pauses the player.

Since :: 2.3

Remarks:: You can resume playback using player_start().

Parameters:

[in] player The handle to the media player

Returns:: 0 on success, otherwise a negative error value

Return values:

PLAYER_ERROR_NONE	Successful
PLAYER_ERROR_INVALID_PARAMETER	Invalid state
PLAYER_ERROR_INVALID_OPERATION	Invalid operation
PLAYER_ERROR_INVALID_STATE	Invalid player state
PLAYER_ERROR_SOUND_POLICY	Sound policy error

Precondition:: The player state must be set to PLAYER_STATE_PLAYING.

Postcondition:: The player state will be PLAYER_STATE_PAUSED.

See also:: player_start()

int player_prepare ( player_h player )

Prepares the media player for playback.

Since :: 2.3

Remarks:: The mediastorage privilege(http://tizen.org/privilege/mediastorage) must be added if any video/audio files are used to play located in the internal storage.; The externalstorage privilege(http://tizen.org/privilege/externalstorage) must be added if any video/audio files are used to play located in the external storage.; The internet privilege(http://tizen.org/privilege/internet) must be added if any URLs are used to play from network.

Parameters:

[in] player The handle to the media player

Returns:: 0 on success, otherwise a negative error value

Return values:

PLAYER_ERROR_NONE	Successful
PLAYER_ERROR_INVALID_PARAMETER	Invalid parameter
PLAYER_ERROR_INVALID_URI	Invalid URI
PLAYER_ERROR_NO_SUCH_FILE	File not found
PLAYER_ERROR_NOT_SUPPORTED_FILE	File not supported
PLAYER_ERROR_INVALID_OPERATION	Invalid operation
PLAYER_ERROR_INVALID_STATE	Invalid player state
PLAYER_ERROR_PERMISSION_DENIED	Permission denied
PLAYER_ERROR_NOT_SUPPORTED_AUDIO_CODEC	Not support audio codec format (Since 4.0)
PLAYER_ERROR_NOT_SUPPORTED_VIDEO_CODEC	Not support video codec format (Since 4.0)

Precondition:: The player state must be set to PLAYER_STATE_IDLE by calling player_create() or player_unprepare(). After that, call player_set_uri() to load the media content you want to play.

Postcondition:: The player state will be PLAYER_STATE_READY.

See also:: player_prepare_async(); player_unprepare(); player_set_uri()

int player_prepare_async	(	player_h	player,
		player_prepared_cb	callback,
		void *	user_data
	)

Prepares the media player for playback, asynchronously.

Since :: 2.3

Remarks:: The mediastorage privilege(http://tizen.org/privilege/mediastorage) must be added if any video/audio files are used to play located in the internal storage.; The externalstorage privilege(http://tizen.org/privilege/externalstorage) must be added if any video/audio files are used to play located in the external storage.; The internet privilege(http://tizen.org/privilege/internet) must be added if any URLs are used to play from network.

Parameters:

[in]	player	The handle to the media player
[in]	callback	The callback function to register
[in]	user_data	The user data to be passed to the callback function

Returns:: 0 on success, otherwise a negative error value

Return values:

PLAYER_ERROR_NONE	Successful
PLAYER_ERROR_INVALID_PARAMETER	Invalid parameter
PLAYER_ERROR_INVALID_URI	Invalid URI
PLAYER_ERROR_NO_SUCH_FILE	File not found
PLAYER_ERROR_NOT_SUPPORTED_FILE	File not supported
PLAYER_ERROR_INVALID_OPERATION	Invalid operation
PLAYER_ERROR_INVALID_STATE	Invalid player state
PLAYER_ERROR_PERMISSION_DENIED	Permission denied

Precondition:: The player state must be set to PLAYER_STATE_IDLE by calling player_create() or player_unprepare(). After that, call player_set_uri() to load the media content you want to play.

Postcondition:: It invokes player_prepared_cb() when playback is prepared.

See also:: player_prepare(); player_prepared_cb(); player_unprepare(); player_set_uri()

int player_push_media_stream	(	player_h	player,
		media_packet_h	packet
	)

Pushes elementary stream to decode audio or video.

Since :: 2.4

Remarks:: player_set_media_stream_info() must be called before using this function.; The available buffer size can be set by calling player_set_media_stream_buffer_max_size(). If there is no available buffer space, this function will return error since 3.0.

Parameters:

[in]	player	The handle to media player
[in]	packet	The media packet to decode

Returns:: 0 on success, otherwise a negative error value

Return values:

PLAYER_ERROR_NONE	Successful
PLAYER_ERROR_INVALID_PARAMETER	Invalid parameter
PLAYER_ERROR_INVALID_STATE	Invalid state
PLAYER_ERROR_NOT_SUPPORTED_FILE	File not supported
PLAYER_ERROR_BUFFER_SPACE	No buffer space available (since 3.0)
PLAYER_ERROR_INVALID_OPERATION	Invalid operation (since 3.0)

Precondition:: The player state must be one of PLAYER_STATE_READY, PLAYER_STATE_PLAYING or PLAYER_STATE_PAUSED.

See also:: player_set_media_stream_info(); player_set_media_stream_buffer_max_size()

int player_select_track	(	player_h	player,
		player_stream_type_e	type,
		int	index
	)

Selects a track to play.

Since :: 2.4

Parameters:

[in]	player	The handle to the media player
[in]	type	The type of target stream which is PLAYER_STREAM_TYPE_AUDIO or PLAYER_STREAM_TYPE_TEXT
[in]	index	The index of track

Returns:: 0 on success, otherwise a negative error value

Return values:

PLAYER_ERROR_NONE	Successful
PLAYER_ERROR_INVALID_PARAMETER	Invalid parameter
PLAYER_ERROR_INVALID_OPERATION	Invalid operation
PLAYER_ERROR_INVALID_STATE	Invalid player state

Precondition:: The player state must be one of PLAYER_STATE_READY, PLAYER_STATE_PLAYING, or PLAYER_STATE_PAUSED

See also:: player_get_current_track()

int player_set_audio_latency_mode	(	player_h	player,
		audio_latency_mode_e	latency_mode
	)

Sets the audio latency mode.

Since :: 2.3

Remarks:: The default audio latency mode of the player is AUDIO_LATENCY_MODE_MID. To get the current audio latency mode, use player_get_audio_latency_mode(). If it's high mode, audio output interval can be increased so, it can keep more audio data to play. But, state transition like pause or resume can be more slower than default(mid) mode.

Parameters:

[in]	player	The handle to the media player
[in]	latency_mode	The latency mode to be applied to the audio

Returns:: 0 on success, otherwise a negative error value

Return values:

PLAYER_ERROR_NONE	Successful
PLAYER_ERROR_INVALID_PARAMETER	Invalid parameter
PLAYER_ERROR_INVALID_OPERATION	Invalid operation

See also:: audio_latency_mode_e; player_get_audio_latency_mode()

int player_set_audio_only	(	player_h	player,
		bool	audio_only
	)

Sets the audio only mode.

This function is used to disable or enable video rendering during playback.

Since :: 4.0

Parameters:

[in]	player	The handle to the media player
[in]	audio_only	The new audio only status: (`true` = enable audio only, `false` = disable audio only)

Returns:: 0 on success, otherwise a negative error value

Return values:

PLAYER_ERROR_NONE	Successful
PLAYER_ERROR_INVALID_PARAMETER	Invalid parameter
PLAYER_ERROR_INVALID_OPERATION	Invalid operation
PLAYER_ERROR_INVALID_STATE	Invalid player state

Precondition:: The player state must be one of: PLAYER_STATE_READY, PLAYER_STATE_PLAYING, or PLAYER_STATE_PAUSED.

See also:: player_is_audio_only()

int player_set_buffering_cb	(	player_h	player,
		player_buffering_cb	callback,
		void *	user_data
	)

Sets a callback function to be invoked when there is a change in the buffering status of a media stream.

Since :: 2.3

Remarks:: The media resource should be streamed over the network.

Parameters:

[in]	player	The handle to the media player
[in]	callback	The callback function to register
[in]	user_data	The user data to be passed to the callback function

Returns:: 0 on success, otherwise a negative error value

Return values:

PLAYER_ERROR_NONE	Successful
PLAYER_ERROR_INVALID_PARAMETER	Invalid parameter
PLAYER_ERROR_INVALID_OPERATION	Invalid operation

Postcondition:: player_buffering_cb() will be invoked.

See also:: player_unset_buffering_cb(); player_set_uri(); player_buffering_cb()

int player_set_completed_cb	(	player_h	player,
		player_completed_cb	callback,
		void *	user_data
	)

Sets a callback function to be invoked when the playback is finished.

Since :: 2.3

Parameters:

[in]	player	The handle to the media player
[in]	callback	The callback function to register
[in]	user_data	The user data to be passed to the callback function

Returns:: 0 on success, otherwise a negative error value

Return values:

PLAYER_ERROR_NONE	Successful
PLAYER_ERROR_INVALID_PARAMETER	Invalid parameter
PLAYER_ERROR_INVALID_OPERATION	Invalid operation

Postcondition:: player_completed_cb() will be invoked.

See also:: player_unset_completed_cb(); player_completed_cb(); player_start()

int player_set_display	(	player_h	player,
		player_display_type_e	type,
		player_display_h	display
	)

Sets the video display.

Since :: 2.3

Remarks:: To get display to set, use GET_DISPLAY().; We are not supporting changing display.; This function have be called before calling the player_prepare() or player_prepare_async()
to reflect the display type.

Parameters:

[in]	player	The handle to the media player
[in]	type	The display type
[in]	display	The handle to display

Returns:: 0 on success, otherwise a negative error value

Return values:

PLAYER_ERROR_NONE	Successful
PLAYER_ERROR_INVALID_PARAMETER	Invalid parameter
PLAYER_ERROR_INVALID_OPERATION	Invalid operation
PLAYER_ERROR_INVALID_STATE	Invalid player state

Precondition:: The player state must be set to PLAYER_STATE_IDLE by calling player_create() or player_unprepare().

See also:: player_display_type_e; player_set_display_mode; player_set_display_roi_area; player_set_display_visible; player_set_display_rotation

int player_set_error_cb	(	player_h	player,
		player_error_cb	callback,
		void *	user_data
	)

Sets a callback function to be invoked when an error occurs.

Since :: 2.3

Parameters:

[in]	player	The handle to the media player
[in]	callback	The callback function to register
[in]	user_data	The user data to be passed to the callback function

Returns:: 0 on success, otherwise a negative error value

Return values:

PLAYER_ERROR_NONE	Successful
PLAYER_ERROR_INVALID_PARAMETER	Invalid parameter
PLAYER_ERROR_INVALID_OPERATION	Invalid operation

Postcondition:: player_error_cb() will be invoked.

See also:: player_unset_error_cb(); player_error_cb()

int player_set_interrupted_cb	(	player_h	player,
		player_interrupted_cb	callback,
		void *	user_data
	)

Sets a callback function to be invoked when the playback is interrupted or the interrupt is completed.

Since :: 2.3

Parameters:

[in]	player	The handle to the media player
[in]	callback	The callback function to register
[in]	user_data	The user data to be passed to the callback function

Returns:: 0 on success, otherwise a negative error value

Return values:

PLAYER_ERROR_NONE	Successful
PLAYER_ERROR_INVALID_PARAMETER	Invalid parameter
PLAYER_ERROR_INVALID_OPERATION	Invalid operation

Postcondition:: player_interrupted_cb() will be invoked.

See also:: player_unset_interrupted_cb(); player_interrupted_code_e; player_interrupted_cb()

int player_set_looping	(	player_h	player,
		bool	looping
	)

Sets the player's looping status.

If the looping status is true, playback automatically restarts upon finishing. If it is false, it won't. The default value is false.

Since :: 2.3

Parameters:

[in]	player	The handle to the media player
[in]	looping	The new looping status: (`true` = looping, `false` = non-looping )

Returns:: 0 on success, otherwise a negative error value

Return values:

PLAYER_ERROR_NONE	Successful
PLAYER_ERROR_INVALID_PARAMETER	Invalid parameter
PLAYER_ERROR_INVALID_OPERATION	Invalid operation
PLAYER_ERROR_INVALID_STATE	Invalid player state

Precondition:: The player state must be one of PLAYER_STATE_IDLE, PLAYER_STATE_READY, PLAYER_STATE_PLAYING, or PLAYER_STATE_PAUSED.

See also:: player_is_looping()

int player_set_max_adaptive_variant_limit	(	player_h	player,
		int	bandwidth,
		int	width,
		int	height
	)

Sets the maximum limit of the streaming variant.

Since :: 4.0

Remarks:: This function is used for adaptive streaming(hls/mpeg dash) only.; The bandwidth setting can only be applied if there is no width, height information at streaming variant header. Application can get all the variant information by calling player_foreach_adaptive_variant() function.; If there is no affordable stream for the condition, the minimum bandwidth stream will be selected.

Parameters:

[in]	player	The handle to the media player
[in]	bandwidth	The max bandwidth limit of the stream variant (default: -1)
[in]	width	The max width limit of the stream variant (deafult: -1)
[in]	height	The max height limit of the stream variant (deafult: -1)

Returns:: 0 on success, otherwise a negative error value

Return values:

PLAYER_ERROR_NONE	Successful
PLAYER_ERROR_INVALID_PARAMETER	Invalid parameter
PLAYER_ERROR_INVALID_OPERATION	Invalid operation

Precondition:: The player state must be one of PLAYER_STATE_IDLE, PLAYER_STATE_READY, PLAYER_STATE_PLAYING, or PLAYER_STATE_PAUSED.

See also:: player_foreach_adaptive_variant(); player_get_max_adaptive_variant_limit()

int player_set_media_packet_video_frame_decoded_cb	(	player_h	player,
		player_media_packet_video_decoded_cb	callback,
		void *	user_data
	)

Sets a media packet video callback function to be called once per frame.

Since :: 2.3

Remarks:: This function must be called before calling player_prepare() or player_prepare_async().
A registered callback is called in a separate thread (not in the main loop).
A video frame can be retrieved using a registered callback as a media packet.
The callback function holds the same buffer that will be drawn on the display device.
So if you change the media packet in a registered callback, it will be displayed on the device
and the media packet is available until it's destroyed by media_packet_destroy().
The packet have to be destroyed as quickly as possible after rendering the packet
and all the packets have to be destroyed before player_unprepare() is called.

Parameters:

[in]	player	The handle to the media player
[in]	callback	The callback function to be registered
[in]	user_data	The user data to be passed to the callback function

Returns:: 0 on success, otherwise a negative error value

Return values:

PLAYER_ERROR_NONE	Successful
PLAYER_ERROR_INVALID_PARAMETER	Invalid parameter
PLAYER_ERROR_INVALID_STATE	Invalid state

Precondition:: The player's state must be PLAYER_STATE_IDLE. And, PLAYER_DISPLAY_TYPE_NONE must be set by calling player_set_display().

See also:: player_unset_media_packet_video_frame_decoded_cb

int player_set_media_stream_buffer_max_size	(	player_h	player,
		player_stream_type_e	type,
		unsigned long long	max_size
	)

Sets the max size bytes of buffer.

Since :: 2.4

Remarks:: This function is used for media stream playback only.; If the buffer level over the max size, player_media_stream_buffer_status_cb() will be invoked with overflow status.

Parameters:

[in]	player	The handle to the media player
[in]	type	The type of target stream
[in]	max_size	The max bytes of buffer, it has to be bigger than zero. (default: 200000)

Returns:: 0 on success, otherwise a negative error value

Return values:

PLAYER_ERROR_NONE	Successful
PLAYER_ERROR_INVALID_PARAMETER	Invalid parameter
PLAYER_ERROR_INVALID_STATE	Invalid player state

Precondition:: The player state must be one of PLAYER_STATE_IDLE, PLAYER_STATE_READY, PLAYER_STATE_PLAYING, or PLAYER_STATE_PAUSED. (since 3.0)

See also:: player_get_media_stream_buffer_max_size(); player_media_stream_buffer_status_cb()

int player_set_media_stream_buffer_min_threshold	(	player_h	player,
		player_stream_type_e	type,
		unsigned int	percent
	)

Sets the buffer threshold percent of buffer.

Since :: 2.4

Remarks:: This function is used for media stream playback only.; If the buffer level drops below the percent value, player_media_stream_buffer_status_cb() will be invoked with underrun status.

Parameters:

[in]	player	The handle to the media player
[in]	type	The type of target stream
[in]	percent	The minimum threshold(0~100) of buffer (default: 0)

Returns:: 0 on success, otherwise a negative error value

Return values:

PLAYER_ERROR_NONE	Successful
PLAYER_ERROR_INVALID_PARAMETER	Invalid parameter
PLAYER_ERROR_INVALID_STATE	Invalid player state

Precondition:: The player state must be one of PLAYER_STATE_IDLE, PLAYER_STATE_READY, PLAYER_STATE_PLAYING, or PLAYER_STATE_PAUSED. (since 3.0)

See also:: player_get_media_stream_buffer_min_threshold(); player_media_stream_buffer_status_cb()

int player_set_media_stream_buffer_status_cb	(	player_h	player,
		player_stream_type_e	type,
		player_media_stream_buffer_status_cb	callback,
		void *	user_data
	)

Sets a callback function to be invoked when buffer underrun or overflow is occurred.

Since :: 2.4

Remarks:: This function is used for media stream playback only.; The callback is called in a separate thread (not in the main loop).

Parameters:

[in]	player	The handle to the media player
[in]	type	The type of target stream
[in]	callback	The buffer status callback function to register
[in]	user_data	The user data to be passed to the callback function

Returns:: 0 on success, otherwise a negative error value

Return values:

PLAYER_ERROR_NONE	Successful
PLAYER_ERROR_INVALID_STATE	Invalid player state
PLAYER_ERROR_INVALID_PARAMETER	Invalid parameter

Precondition:: The player state must be set to PLAYER_STATE_IDLE by calling player_create() or player_unprepare().

Postcondition:: player_media_stream_buffer_status_cb() will be invoked.

See also:: player_unset_media_stream_buffer_status_cb(); player_media_stream_buffer_status_cb()

int player_set_media_stream_info	(	player_h	player,
		player_stream_type_e	type,
		media_format_h	format
	)

Sets contents information for media stream.

Since :: 2.4

Remarks:: AV format must be set before pushing elementary stream with player_push_media_stream().; This function must be called before calling the player_prepare() or player_prepare_async() to reflect the media information.; AAC can be supported.; H.264 can be supported.

Parameters:

[in]	player	The handle to media player
[in]	type	The type of target stream
[in]	format	The media format to set audio information

Returns:: 0 on success, otherwise a negative error value

Return values:

PLAYER_ERROR_NONE	Successful
PLAYER_ERROR_INVALID_PARAMETER	Invalid parameter
PLAYER_ERROR_INVALID_STATE	Invalid state

Precondition:: The player state must be set to PLAYER_STATE_IDLE by calling player_create() or player_unprepare().

See also:: player_push_media_stream()

int player_set_media_stream_seek_cb	(	player_h	player,
		player_stream_type_e	type,
		player_media_stream_seek_cb	callback,
		void *	user_data
	)

Sets a callback function to be invoked when seeking is occurred.

Since :: 2.4

Remarks:: This function is used for media stream playback only.; The callback is called in a separate thread (not in the main loop).

Parameters:

[in]	player	The handle to the media player
[in]	type	The type of target stream
[in]	callback	The callback function to register
[in]	user_data	The user data to be passed to the callback function

Returns:: 0 on success, otherwise a negative error value

Return values:

PLAYER_ERROR_NONE	Successful
PLAYER_ERROR_INVALID_STATE	Invalid player state
PLAYER_ERROR_INVALID_PARAMETER	Invalid parameter

Precondition:: The player state must be set to PLAYER_STATE_IDLE by calling player_create() or player_unprepare().

Postcondition:: player_media_stream_seek_cb() will be invoked.

See also:: player_unset_media_stream_seek_cb(); player_media_stream_seek_cb()

int player_set_memory_buffer	(	player_h	player,
		const void *	data,
		int	size
	)

Sets memory as the data source.

Associates media content, cached in memory, with the player. Unlike the case of player_set_uri(), the media resides in memory. If the function call is successful, subsequent calls to player_prepare() and player_start() will start playing the media.

Since :: 2.3

Remarks:: If you provide an invalid data, you won't receive an error message until you call player_start().; This function must be called before calling the player_prepare() or player_prepare_async() to build the player based on the data.

Parameters:

[in]	player	The handle to the media player
[in]	data	The memory pointer of media data
[in]	size	The size of media data

Returns:: 0 on success, otherwise a negative error value

Return values:

PLAYER_ERROR_NONE	Successful
PLAYER_ERROR_INVALID_PARAMETER	Invalid parameter
PLAYER_ERROR_INVALID_OPERATION	Invalid operation
PLAYER_ERROR_INVALID_STATE	Invalid player state

Precondition:: The player state must be set to PLAYER_STATE_IDLE by calling player_create() or player_unprepare().

See also:: player_set_uri()

int player_set_mute	(	player_h	player,
		bool	muted
	)

Sets the player's mute status.

If the mute status is true, no sounds are played. If it is false, sounds are played at the previously set volume level. Until this function is called, by default the player is not muted.

Since :: 2.3

Parameters:

[in]	player	The handle to the media player
[in]	muted	The new mute status: (`true` = mute, `false` = not muted)

Returns:: 0 on success, otherwise a negative error value

Return values:

PLAYER_ERROR_NONE	Successful
PLAYER_ERROR_INVALID_PARAMETER	Invalid parameter
PLAYER_ERROR_INVALID_OPERATION	Invalid operation

Precondition:: The player state must be one of PLAYER_STATE_IDLE, PLAYER_STATE_READY, PLAYER_STATE_PLAYING, or PLAYER_STATE_PAUSED.

See also:: player_is_muted()

int player_set_play_position	(	player_h	player,
		int	millisecond,
		bool	accurate,
		player_seek_completed_cb	callback,
		void *	user_data
	)

Sets the seek position for playback, asynchronously.

Since :: 2.3

Remarks:: This function will trigger the seeking operation on player instance. Normally application need to wait for player_seek_completed_cb() before calling it again. Otherwise it will return PLAYER_ERROR_SEEK_FAILED. Please note that if application is playing external media data via player_set_media_stream_info(), then consecutive calling of this function will always success and no need to wait for player_seek_completed_cb() before next calling of this function.(Since 3.0); Even if you don't set visible to true by calling player_set_display_visible, the video will be shown when the _seek_completed cb is invoked.; In case of non-seekable content, it will return PLAYER_ERROR_INVALID_OPERATION. If application ignore this error, player will keep playing without changing play position.

Parameters:

[in]	player	The handle to the media player
[in]	millisecond	The position in milliseconds from the start to the seek point
[in]	accurate	If `true` the selected position is returned, but this might be considerably slow, if `false` the nearest key frame position is returned, but this might be faster but less accurate.
[in]	callback	The callback function to register
[in]	user_data	The user data to be passed to the callback function

Returns:: 0 on success, otherwise a negative error value

Return values:

PLAYER_ERROR_NONE	Successful
PLAYER_ERROR_INVALID_STATE	Invalid player state
PLAYER_ERROR_INVALID_PARAMETER	Invalid parameter
PLAYER_ERROR_INVALID_OPERATION	Invalid operation
PLAYER_ERROR_SEEK_FAILED	Seek operation failure

Precondition:: The player state must be one of PLAYER_STATE_READY, PLAYER_STATE_PLAYING, or PLAYER_STATE_PAUSED.

Postcondition:: It invokes player_seek_completed_cb() when seek operation completes, if you set a callback.

See also:: player_get_play_position()

int player_set_playback_rate	(	player_h	player,
		float	rate
	)

Sets the playback rate.

The default value is 1.0.

Since :: 2.3

Remarks:: PLAYER_ERROR_INVALID_OPERATION occurs when streaming playback.; No operation is performed, if rate is 0.; The sound is muted, when playback rate is under 0.0 and over 2.0.

Parameters:

[in]	player	The handle to the media player
[in]	rate	The playback rate (-5.0x ~ 5.0x)

Returns:: 0 on success, otherwise a negative error value

Return values:

PLAYER_ERROR_NONE	Successful
PLAYER_ERROR_INVALID_PARAMETER	Invalid parameter
PLAYER_ERROR_INVALID_OPERATION	Invalid operation
PLAYER_ERROR_INVALID_STATE	Invalid player state

Precondition:: The player state must be one of PLAYER_STATE_READY, PLAYER_STATE_PLAYING, or PLAYER_STATE_PAUSED.

int player_set_progressive_download_message_cb	(	player_h	player,
		player_pd_message_cb	callback,
		void *	user_data
	)

Sets a callback function to be invoked when progressive download is started or completed.

Deprecated:: Deprecated since 4.0.

Since :: 2.3

Parameters:

[in]	player	The handle to the media player
[in]	callback	The callback function to register
[in]	user_data	The user data to be passed to the callback function

Returns:: 0 on success, otherwise a negative error value

Return values:

PLAYER_ERROR_NONE	Successful
PLAYER_ERROR_INVALID_PARAMETER	Invalid parameter
PLAYER_ERROR_INVALID_OPERATION	Invalid operation

Precondition:: The path to download must be set by calling player_set_progressive_download_path().

Postcondition:: player_pd_message_cb() will be invoked.

See also:: player_unset_progressive_download_message_cb(); player_set_progressive_download_path()

int player_set_progressive_download_path	(	player_h	player,
		const char *	path
	)

Sets a path to download, progressively.

Deprecated:: Deprecated since 4.0.

Since :: 2.3

Remarks:: Progressive download will be started when you invoke player_start().; This function must be called before calling the player_prepare() or player_prepare_async() to reflect the download path when the player is building.; The mediastorage privilege(http://tizen.org/privilege/mediastorage) must be added if any files are used to download and play located in the internal storage.; The externalstorage privilege(http://tizen.org/privilege/externalstorage) must be added if any files are used to download and play located in the external storage.

Parameters:

[in]	player	The handle to the media player
[in]	path	The absolute path to download

Returns:: 0 on success, otherwise a negative error value

Return values:

PLAYER_ERROR_NONE	Successful
PLAYER_ERROR_INVALID_PARAMETER	Invalid parameter
PLAYER_ERROR_INVALID_OPERATION	Invalid operation
PLAYER_ERROR_INVALID_STATE	Invalid player state
PLAYER_ERROR_PERMISSION_DENIED	Permission denied

Precondition:: The player state must be set to PLAYER_STATE_IDLE by calling player_create() or player_unprepare().

See also:: player_set_progressive_download_message_cb(); player_unset_progressive_download_message_cb()

int player_set_sound_stream_info	(	player_h	player,
		sound_stream_info_h	stream_info
	)

Sets the player's sound manager stream information.

Since :: 3.0

Remarks:: You can set sound stream information including audio routing and volume type. For more details, please refer to sound_manager.h; This function must be called before calling the player_prepare() or player_prepare_async() to reflect the sound stream information when the player is building.; This function is related to the following feature:
http://tizen.org/feature/multimedia.player.stream_info
If this feature is not supported, the stream_type of the player is fixed to the SOUND_STREAM_TYPE_MEDIA.

Parameters:

[in]	player	The handle to the media player
[in]	stream_info	The sound manager info type

Returns:: 0 on success, otherwise a negative error value

Return values:

PLAYER_ERROR_NONE	Successful
PLAYER_ERROR_INVALID_PARAMETER	Invalid parameter
PLAYER_ERROR_INVALID_OPERATION	Invalid operation
PLAYER_ERROR_INVALID_STATE	Invalid player state
PLAYER_ERROR_FEATURE_NOT_SUPPORTED_ON_DEVICE	Unsupported feature

Precondition:: The player state must be set to PLAYER_STATE_IDLE by calling player_create().

See also:: sound_stream_info_h; sound_manager_create_stream_information(); sound_manager_destroy_stream_information()

Example

       #include <player.h>
       #include <sound_manager.h>
       ...
       player_h player = NULL;
       sound_stream_info_h stream_info = NULL;
       sound_stream_type_e stream_type = SOUND_STREAM_TYPE_MEDIA;
       ...
       sound_manager_create_stream_information (stream_type, _focus_callback, use_data, &stream_info);
       player_create (&player);
       player_set_sound_stream_info (player, stream_info);
       ...
       player_prepare_async (player, _prepared_cb, udata);
       ...

int player_set_sound_type	(	player_h	player,
		sound_type_e	type
	)

Sets the player's volume type.

Deprecated:: Deprecated since 3.0. Use player_set_sound_stream_info() instead.

Since :: 2.3

Remarks:: The default sound type of the player is SOUND_TYPE_MEDIA. To get the current sound type, use sound_manager_get_current_sound_type().; If stream_info already exists by calling sound_manager_create_stream_info(), It will return error since 3.0.

Parameters:

[in]	player	The handle to the media player
[in]	type	The sound type

Returns:: 0 on success, otherwise a negative error value

Return values:

PLAYER_ERROR_NONE	Successful
PLAYER_ERROR_INVALID_PARAMETER	Invalid parameter
PLAYER_ERROR_SOUND_POLICY	Sound policy error

Precondition:: The player state must be set to PLAYER_STATE_IDLE by calling player_create().

See also:: sound_manager_get_current_sound_type()

int player_set_streaming_buffering_time	(	player_h	player,
		int	prebuffer_ms,
		int	rebuffer_ms
	)

Sets the streaming buffering time.

Since :: 4.0

Parameters:

[in]	player	The handle to the media player
[in]	prebuffer_ms	The buffer time to start playback
[in]	rebuffer_ms	The buffer time during playback if player enter pause state for buffering.

Returns:: 0 on success, otherwise a negative error value

Return values:

PLAYER_ERROR_NONE	Successful
PLAYER_ERROR_INVALID_PARAMETER	Invalid parameter
PLAYER_ERROR_INVALID_STATE	Invalid state

Precondition:: The player state must be PLAYER_STATE_IDLE.

See also:: player_get_streaming_buffering_time()

int player_set_streaming_cookie	(	player_h	player,
		const char *	cookie,
		int	size
	)

Sets the cookie for streaming playback.

Since :: 2.3

Remarks:: This function must be called before calling the player_prepare() or player_prepare_async() to reflect the cookie information when the streaming connection is set up.

Parameters:

[in]	player	The handle to the media player
[in]	cookie	The cookie to set
[in]	size	The size of the cookie

Returns:: 0 on success, otherwise a negative error value

Return values:

PLAYER_ERROR_NONE	Successful
PLAYER_ERROR_INVALID_PARAMETER	Invalid parameter
PLAYER_ERROR_INVALID_OPERATION	Invalid operation
PLAYER_ERROR_INVALID_STATE	Invalid player state

Precondition:: The player state must be set to PLAYER_STATE_IDLE by calling player_create() or player_unprepare().

See also:: player_set_uri(); player_set_streaming_user_agent()

int player_set_streaming_user_agent	(	player_h	player,
		const char *	user_agent,
		int	size
	)

Sets the streaming user agent for playback.

Since :: 2.3

Remarks:: This function must be called before calling the player_prepare() or player_prepare_async() to reflect the user agent information when the streaming connection is set up.

Parameters:

[in]	player	The handle to the media player
[in]	user_agent	The user agent to set
[in]	size	The size of the user agent

Returns:: 0 on success, otherwise a negative error value

Return values:

PLAYER_ERROR_NONE	Successful
PLAYER_ERROR_INVALID_PARAMETER	Invalid parameter
PLAYER_ERROR_INVALID_OPERATION	Invalid operation
PLAYER_ERROR_INVALID_STATE	Invalid player state

Precondition:: The player state must be set to PLAYER_STATE_IDLE by calling player_create() or player_unprepare().

See also:: player_set_uri(); player_set_streaming_cookie()

int player_set_uri	(	player_h	player,
		const char *	uri
	)

Sets the data source (file-path, HTTP or RTSP URI) to use.

Associates media contents, referred to by the URI, with the player. If the function call is successful, subsequent calls to player_prepare() and player_start() will start playing the media.

Since :: 2.3

Remarks:: If you use HTTP or RTSP, URI must start with "http://" or "rtsp://". The default protocol is "file://". If you provide an invalid URI, you won't receive an error message until you call player_start().; This function must be called before calling the player_prepare() or player_prepare_async() to build the player based on the URI information.; The mediastorage privilege(http://tizen.org/privilege/mediastorage) must be added if any video/audio files are used to play located in the internal storage.; The externalstorage privilege(http://tizen.org/privilege/externalstorage) must be added if any video/audio files are used to play located in the external storage.; The internet privilege(http://tizen.org/privilege/internet) must be added if any URLs are used to play from network.

Parameters:

[in]	player	The handle to the media player
[in]	uri	The content location, such as the file path, the URI of the HTTP or RTSP stream you want to play

Returns:: 0 on success, otherwise a negative error value

Return values:

PLAYER_ERROR_NONE	Successful
PLAYER_ERROR_INVALID_PARAMETER	Invalid parameter
PLAYER_ERROR_INVALID_OPERATION	Invalid operation
PLAYER_ERROR_INVALID_STATE	Invalid player state
PLAYER_ERROR_PERMISSION_DENIED	Permission denied

Precondition:: The player state must be set to PLAYER_STATE_IDLE by calling player_create() or player_unprepare().

See also:: player_set_memory_buffer()

int player_set_volume	(	player_h	player,
		float	left,
		float	right
	)

Sets the player's volume.

Setting this volume adjusts the player's instance volume, not the system volume. The valid range is from 0 to 1.0, inclusive (1.0 = 100%). Default value is 1.0. To change system volume, use the Sound Manager API. Finally, it does not support to set other value into each channel currently.

Since :: 2.3

Parameters:

[in]	player	The handle to the media player
[in]	left	The left volume scalar
[in]	right	The right volume scalar

Returns:: 0 on success, otherwise a negative error value

Return values:

PLAYER_ERROR_NONE	Successful
PLAYER_ERROR_INVALID_PARAMETER	Invalid parameter
PLAYER_ERROR_INVALID_OPERATION	Invalid operation

See also:: player_get_volume()

int player_start ( player_h player )

Starts or resumes playback.

Plays current media content, or resumes play if paused.

Since :: 2.3

Remarks:: Sound can be mixed with other sounds if you don't control the stream focus in sound-manager module since 3.0.
You can refer to Sound Manager.; Even if you don't set visible to true by calling player_set_display_visible, the video will be shown on PLAYER_STATE_PLAYING state.

Parameters:

[in] player The handle to the media player

Returns:: 0 on success, otherwise a negative error value

Return values:

PLAYER_ERROR_NONE	Successful
PLAYER_ERROR_INVALID_PARAMETER	Invalid parameter
PLAYER_ERROR_INVALID_OPERATION	Invalid operation
PLAYER_ERROR_INVALID_STATE	Invalid player state
PLAYER_ERROR_CONNECTION_FAILED	Network connection failed
PLAYER_ERROR_SOUND_POLICY	Sound policy error

Precondition:: player_prepare() must be called before calling this function.; The player state must be set to PLAYER_STATE_READY by calling player_prepare() or set to PLAYER_STATE_PAUSED by calling player_pause().

Postcondition:: The player state will be PLAYER_STATE_PLAYING.; It invokes player_completed_cb() when playback completes, if you set a callback with player_set_completed_cb().; It invokes player_pd_message_cb() when progressive download starts or completes, if you set a download path with player_set_progressive_download_path() and a callback with player_set_progressive_download_message_cb().

See also:: player_prepare(); player_prepare_async(); player_stop(); player_pause(); player_set_completed_cb(); player_completed_cb(); player_set_progressive_download_path(); player_set_progressive_download_message_cb(); player_pd_message_cb(); player_set_display_visible()

int player_stop ( player_h player )

Stops playing media content.

Since :: 2.3

Parameters:

[in] player The handle to the media player

Returns:: 0 on success, otherwise a negative error value

Return values:

PLAYER_ERROR_NONE	Successful
PLAYER_ERROR_INVALID_PARAMETER	Invalid state
PLAYER_ERROR_INVALID_OPERATION	Invalid operation
PLAYER_ERROR_INVALID_STATE	Invalid player state
PLAYER_ERROR_SOUND_POLICY	Sound policy error

Precondition:: The player state must be set to PLAYER_STATE_PLAYING by calling player_start() or set to PLAYER_STATE_PAUSED by calling player_pause().

Postcondition:: The player state will be PLAYER_STATE_READY.; The downloading will be aborted if you use progressive download.

See also:: player_start(); player_pause()

int player_unprepare ( player_h player )

Resets the media player.

The most recently used media is reset and no longer associated with the player. Playback is no longer possible. If you want to use the player again, you must set the data URI and call player_prepare() again.

Since :: 2.3

Parameters:

[in] player The handle to the media player

Returns:: 0 on success, otherwise a negative error value

Return values:

PLAYER_ERROR_NONE	Successful
PLAYER_ERROR_INVALID_PARAMETER	Invalid parameter
PLAYER_ERROR_INVALID_OPERATION	Invalid operation
PLAYER_ERROR_INVALID_STATE	Invalid player state

Precondition:: The player state must be higher than PLAYER_STATE_IDLE.

Postcondition:: The player state will be PLAYER_STATE_IDLE.

See also:: player_prepare()

int player_unset_buffering_cb ( player_h player )

Unsets the buffering callback function.

Since :: 2.3

Parameters:

[in] player The handle to the media player

Returns:: 0 on success, otherwise a negative error value

Return values:

PLAYER_ERROR_NONE	Successful
PLAYER_ERROR_INVALID_PARAMETER	Invalid parameter
PLAYER_ERROR_INVALID_OPERATION	Invalid operation

See also:: player_set_buffering_cb()

int player_unset_completed_cb ( player_h player )

Unsets the playback completed callback function.

Since :: 2.3

Parameters:

[in] player The handle to the media player

Returns:: 0 on success, otherwise a negative error value

Return values:

PLAYER_ERROR_NONE	Successful
PLAYER_ERROR_INVALID_PARAMETER	Invalid parameter
PLAYER_ERROR_INVALID_OPERATION	Invalid operation

See also:: player_set_completed_cb()

int player_unset_error_cb ( player_h player )

Unsets the error callback function.

Since :: 2.3

Parameters:

[in] player The handle to the media player

Returns:: 0 on success, otherwise a negative error value

Return values:

PLAYER_ERROR_NONE	Successful
PLAYER_ERROR_INVALID_PARAMETER	Invalid parameter
PLAYER_ERROR_INVALID_OPERATION	Invalid operation

See also:: player_set_error_cb()

int player_unset_interrupted_cb ( player_h player )

Unsets the interrupted callback function.

Since :: 2.3

Parameters:

[in] player The handle to the media player

Returns:: 0 on success, otherwise a negative error value

Return values:

PLAYER_ERROR_NONE	Successful
PLAYER_ERROR_INVALID_PARAMETER	Invalid parameter
PLAYER_ERROR_INVALID_OPERATION	Invalid operation

See also:: player_set_interrupted_cb()

int player_unset_media_packet_video_frame_decoded_cb ( player_h player )

Unsets the media packet video frame callback function.

Since :: 2.3

Parameters:

[in] player The handle to the media player

Returns:: 0 on success, otherwise a negative error value

Return values:

PLAYER_ERROR_NONE	Successful
PLAYER_ERROR_INVALID_PARAMETER	Invalid parameter

Precondition:: The player's state must be PLAYER_STATE_READY or PLAYER_STATE_IDLE

See also:: player_set_media_packet_video_frame_decoded_cb()

int player_unset_media_stream_buffer_status_cb	(	player_h	player,
		player_stream_type_e	type
	)

Unsets the buffer status callback function.

Since :: 2.4

Remarks:: This function is used for media stream playback only.

Parameters:

[in]	player	The handle to the media player
[in]	type	The type of target stream

Returns:: 0 on success, otherwise a negative error value

Return values:

PLAYER_ERROR_NONE	Successful
PLAYER_ERROR_INVALID_STATE	Invalid player state
PLAYER_ERROR_INVALID_PARAMETER	Invalid parameter

See also:: player_set_media_stream_buffer_status_cb()

int player_unset_media_stream_seek_cb	(	player_h	player,
		player_stream_type_e	type
	)

Unsets the seek callback function.

Since :: 2.4

Parameters:

[in]	player	The handle to the media player
[in]	type	The type of target stream

Returns:: 0 on success, otherwise a negative error value

Return values:

PLAYER_ERROR_NONE	Successful
PLAYER_ERROR_INVALID_STATE	Invalid player state
PLAYER_ERROR_INVALID_PARAMETER	Invalid parameter

See also:: player_set_media_stream_seek_cb()

int player_unset_progressive_download_message_cb ( player_h player )

Unsets the progressive download message callback function.

Deprecated:: Deprecated since 4.0.

Since :: 2.3

Parameters:

[in] player The handle to the media player

Returns:: 0 on success, otherwise a negative error value

Return values:

PLAYER_ERROR_NONE	Successful
PLAYER_ERROR_INVALID_PARAMETER	Invalid parameter
PLAYER_ERROR_INVALID_OPERATION	Invalid operation

See also:: player_set_progressive_download_message_cb()

Required Header

Overview

State Diagram

State Transitions

State Dependent Function Calls

Asynchronous Operations

Callback(Event) Operations

Functions

Typedefs

Typedef Documentation

Enumeration Type Documentation

Function Documentation